Skip to main content
v2026.11,986 entries · CC-BY 4.0

Advanced Composites and Hybrid Materials: Journal Guide

A researcher guide to Advanced Composites and Hybrid Materials: covering scope, 15.5 impact factor, open access APC, peer review, and author guidelines.

Written and maintained by CASRAI Editorial Board

Published

On this page

Advanced Composites and Hybrid Materials is an international peer-reviewed academic journal published by Springer Nature that focuses on multi-component materials, polymeric matrices, nanocomposites, and interface engineering. Operating under a fully open access publishing model with a 2025 Journal Impact Factor of 15.5 and single-blind peer review, the publication provides researchers with rapid dissemination across materials science, chemical physics, and structural engineering disciplines.

What is Advanced Composites and Hybrid Materials?

Advanced Composites and Hybrid Materials is a scholarly publication established to bridge foundational materials chemistry with structural engineering applications. Published under the imprint of Springer Nature Switzerland AG (Springer-Verlag), the journal provides an international dissemination channel for peer-reviewed studies examining the synthesis, processing, characterization, and mechanical modeling of multi-phase material systems.

The publication carries Print ISSN 2522-0128 and Electronic ISSN 2522-0136. Unlike traditional hybrid subscription periodicals that retain paywalled access barriers behind institutional subscriptions, this journal functions as a pure Gold Open Access venue. All published research articles, technical reviews, and rapid communications are made openly readable worldwide immediately upon digital release without embargo periods.

In materials science, the classification of advanced composites spans structural arrangements where continuous fibers, particulate reinforcements, or two-dimensional nanostructures are integrated within polymer, metal, or ceramic matrices. Hybrid materials extend this principle by coupling inorganic and organic phases at molecular or nanoscale dimensions. The journal focuses specifically on systems where macroscopic functional properties exceed the rule-of-mixtures predictions of individual constituent components.

Authors submitting to the venue represent interdisciplinary research teams across mechanical engineering, aerospace structural design, polymer physics, electrical energy storage, and biomaterials development. The editorial workflow balances fundamental mechanics with technological utility, evaluating whether submitted manuscripts present sufficient quantitative characterization and reproducibility to inform practical fabrication pipelines.

Editorial leadership and journal scope

The academic direction of Advanced Composites and Hybrid Materials is directed by Editor-in-Chief Professor Tony McNally, Chair in Nanotechnology and Director of the International Manufacturing Centre at WMG, University of Warwick, United Kingdom. The editor-in-chief oversees an international editorial board of associate editors and editorial board members with specialized expertise across synthetic chemistry, solid mechanics, functional nanomaterials, and multiscale computational physics.

The stated aims and scope of the journal encompass several specialized research pillars within modern materials technology:

  • Nanocomposites and Hybrid Architectures: Synthesis and characterization of matrices filled with carbon nanotubes, graphene, MXenes, transition metal dichalcogenides, and functionalized ceramic nanoparticles.
  • Interface and Interphase Engineering: Quantitative analysis of chemical bonding, stress transfer, interfacial shear strength, and load distribution between reinforcement phases and matrix binders.
  • Multifunctional Performance: Systems designed for simultaneous mechanical load-bearing, electromagnetic interference (EMI) shielding, thermal dissipation, electrocatalysis, and electrochemical energy storage in batteries and supercapacitors.
  • Advanced Processing Technologies: Automated manufacturing methods, including additive manufacturing (3D and 4D printing), automated fiber placement, microwave-assisted curing, and ultrasonic or induction joining techniques.
  • Modeling and Simulation: Continuum mechanics, finite element analysis (FEA), molecular dynamics (MD), and machine-learning frameworks evaluating microstructure-property relationships and failure criteria.
  • Stimuli-Responsive and Biomimetic Materials: Smart polymers, self-healing coatings, shape-memory alloys, and bio-inspired composite microstructures designed for adaptive mechanical behavior.

Manuscripts that present descriptive empirical mixing studies without systematic mechanical verification, mechanistic rationale, or interfacial analysis are routinely filtered out during initial editorial screening. The journal emphasizes reproducible experimental methodologies paired with quantitative structural diagnostics.

Advanced Composites and Hybrid Materials impact factor and citation metrics

Citation performance remains a central consideration for researchers evaluating prospective publication venues. According to Clarivate Journal Citation Reports, the 2025 Journal Impact Factor for Advanced Composites and Hybrid Materials is 15.5, accompanied by a 5-year Journal Impact Factor of 14.3. These values position the journal within the top quartile (Q1) across Web of Science categories covering Materials Science, Composites and Polymer Science.

The publication also records substantial digital circulation, achieving 1.4 million annual article downloads in 2025. Editorial processing velocity is relatively swift, demonstrating a median duration from initial manuscript submission to first editorial decision of 47 days. For authors navigating tenure evaluations, institutional performance assessments, or national grant compliance benchmarks, these quantitative indicators reflect high visibility within scholarly communication networks.

Understanding citation metrics requires examining how citation windows operate in specialized fields. In bibliometrics, the standard calculation documented in the CASRAI definition of a journal impact factor tallies citations received in a target calendar year to citable items published during the preceding two-year interval. In fields experiencing rapid expansion, such as nanomaterials and electromagnetic shielding composites, brief citation windows can create dramatic fluctuations in annual scores.

Prospective authors must also note official governance notices regarding citation dynamics. Springer Nature and Editor-in-Chief Professor Tony McNally released an official announcement confirming that the Springer Nature Research Integrity Group is conducting an active investigation into unusual citation patterns involving articles published in Advanced Composites and Hybrid Materials. Such investigations occur when automated citation index monitoring detects localized citation clustering or anomalous reference distributions. Academic authors are advised to monitor official editorial notices from Springer Nature regarding any prospective indexation adjustments resulting from this review.

How to submit a manuscript: step-by-step author workflow

Submitting an article to Advanced Composites and Hybrid Materials requires navigating the standardized Nature Portfolio and Springer Nature manuscript handling architecture. The journal utilizes the centralized Springer Nature Article Processing Platform (SNAPP) accessible via the submission portal. Prospective contributors should follow this structured seven-step submission sequence:

  1. Portal Authentication and Submission Initiation: Navigate to the official submission gateway at submission.nature.com. Authors authenticate using institutional credentials or an active ORCID identifier. Select Advanced Composites and Hybrid Materials from the journal roster and initialize a new manuscript record.
  2. Manuscript File Preparation: Prepare the main text as a clean document file (DOCX or LaTeX). Ensure the title page includes full institutional affiliations, corresponding author email addresses, an abstract strictly capped at 250 words, and 4 to 6 specific indexing keywords. Citations within the narrative must use numerical identifiers formatted in square brackets matching the reference sequence.
  3. Compliance Declarations: Complete mandatory declaration sections within the submission portal. These encompass explicit statements regarding competing financial or commercial interests, detailed research funding grants (including grant registration numbers), ethics committee approvals for relevant testing protocols, and formal data availability disclosures indicating where primary experimental datasets are archived.
  4. Author and Reviewer Designations: Enter all co-authors in the metadata interface to ensure accurate Crossref attribution. Authors may suggest three to five qualified peer reviewers who possess relevant domain expertise and hold no institutional or collaborative conflicts of interest. The interface also accommodates author requests to exclude specific individual reviewers or competitive laboratories.
  5. Peer Review Track Assignment: Confirm acceptance of the journal evaluation structure. The publication operates a single-blind review protocol, meaning reviewers are informed of author identities while reviewer identities remain anonymous, as analyzed in the CASRAI comparative review of single-blind vs double-blind vs open peer review frameworks.
  6. Licensing and APC Agreement: Review the open access terms and Article Processing Charge schedule. Authors indicate whether their work will be published under a Creative Commons Attribution Non-Commercial No Derivatives license (CC BY-NC-ND) or a Creative Commons Attribution license (CC BY). Applications for institutional discounts or low-income waiver programs must be recorded at this stage.
  7. Final Proofing and Technical Dispatch: Upload high-resolution graphic figures (TIFF or EPS format, minimum 300 DPI), supplementary computational data files, and graphical abstracts. Review the automatically generated PDF proof thoroughly to ensure equations, special Unicode characters, and tabular data rendered accurately before executing the final submission button.

Publishing model, APC fees, and waiver policies

Advanced Composites and Hybrid Materials operates exclusively as a Gold Open Access journal. As detailed in the CASRAI guide comparing Gold vs Green vs Diamond vs Hybrid open access models, Gold OA shifts financial costs from academic journal subscribers to publishing authors or their funding bodies. Under this arrangement, articles are published with open digital availability immediately upon peer review acceptance.

The standard Article Processing Charge (APC) for manuscripts accepted by the journal is fixed at £2,490.00 GBP, $3,490.00 USD, or €2,790.00 EUR. Value Added Tax (VAT) or regional sales levies are applied according to the author’s institutional tax residence. The invoice is generated based on the prevailing fee schedule on the exact date of manuscript acceptance, rather than the initial submission date.

Authors can cover or reduce APC requirements through three primary mechanisms:

  • Institutional Transformative Agreements: Springer Nature maintains comprehensive open access read-and-publish agreements with national university consortia, research councils, and university systems across Europe, North America, and parts of the Asia-Pacific. Corresponding authors affiliated with qualifying institutions often receive full APC coverage automatically without out-of-pocket costs.
  • World Bank Country Waivers: Springer Nature provides automatic full APC waivers for corresponding authors whose primary institutional affiliation is located within countries designated by the World Bank as low-income economies. Authors based in lower-middle-income economies are eligible for a 50 percent fee reduction upon editorial verification.
  • Discretionary Need-Based Waivers: Authors from independent institutes or underfunded labs lacking institutional agreements or geographic exemptions may submit a formal request for a discretionary waiver. Crucially, Springer Nature policy mandates that all discretionary waiver requests must be submitted during initial manuscript submission; requests initiated during peer review or post-acceptance cannot be processed.

Articles accepted for publication are typically published under a CC BY-NC-ND 4.0 license, which permits non-commercial sharing while prohibiting modifications. However, authors supported by funders requiring Plan S compliance (such as the UK Research and Innovation, Wellcome Trust, or European Research Council) can request publication under the unrestrictive Creative Commons Attribution (CC BY 4.0) license.

Indexing coverage and bibliographic status

Bibliographic indexation determines whether an author’s work is discoverable through major academic discovery engines and eligible for research evaluation metrics. Advanced Composites and Hybrid Materials maintains active abstracting and indexing coverage across major global scholarly discovery services:

  • Web of Science (Clarivate): Indexed in the Science Citation Index Expanded (SCIE), Current Contents/Engineering, Computing and Technology, and Current Contents/Physical, Chemical and Earth Sciences.
  • Scopus (Elsevier): Comprehensive citation tracking, contributing to Scopus author metrics and institutional profiles.
  • Engineering & Specialized Databases: EI Compendex, Chemical Abstracts Service (CAS), and INSPEC.
  • Global Discovery Aggregators: Google Scholar, Dimensions, SCImago, EBSCO, ProQuest, Semantic Scholar, Naver, Baidu, CNKI, Wanfang, and OCLC WorldCat.
  • Digital Preservation Archives: Long-term electronic preservation secured through Portico and CLOCKSS digital archives.

A notable bibliographic nuance is the journal’s presence in open access registries. Despite being a pure Gold Open Access journal with all content openly readable online, Advanced Composites and Hybrid Materials is not currently indexed in the Directory of Open Access Journals (DOAJ). For scholars whose institutional assessment criteria or grant guidelines explicitly mandate publication exclusively in DOAJ-indexed venues, this absence represents an essential compliance factor that must be confirmed prior to manuscript submission.

Strengths, limitations, and alternative journals

When selecting a target journal in materials engineering, researchers must balance publication prestige, review speed, financial costs, and disciplinary reach. Advanced Composites and Hybrid Materials presents several distinct strengths alongside notable limitations that warrant careful editorial deliberation.

Among its principal strengths, the journal provides high citation visibility, evidenced by its 15.5 Journal Impact Factor and over 1.4 million annual downloads. Its median submission-to-first-decision speed of 47 days provides authors with relatively swift editorial turnaround compared to legacy subscription print journals, which frequently require three to six months for initial peer evaluations. Furthermore, Springer Nature’s extensive global infrastructure ensures robust digital preservation and worldwide discovery across engineering libraries.

Conversely, significant limitations include the mandatory $3,490 USD publication fee, which can present a barrier for research groups without dedicated open access funding or institutional agreements. Furthermore, the absence of DOAJ indexation may disqualify the venue for specific European or funder-mandated open science compliance audits. Finally, the ongoing integrity inquiry regarding citation patterns introduces potential volatility regarding future indexation stability.

Researchers evaluating potential submission outlets often benchmark Advanced Composites and Hybrid Materials against several prominent peer journals across polymer science, composite manufacturing, and applied materials. The table below outlines key editorial specifications across leading peer venues:

Journal Title Publisher Publishing Model Impact Factor (2025) Review Speed (First Decision) Core Research Focus
Advanced Composites and Hybrid Materials Springer Nature Fully Open Access ($3,490 APC) 15.5 47 days median Nanocomposites, multi-component hybrid systems, interface modeling
Composites Part B: Engineering Elsevier Hybrid (Subscription / Optional OA) 14.0 34 days median Structural composite mechanics, manufacturing, aerospace composites
ACS Applied Polymer Materials American Chemical Society Hybrid (Subscription / Optional OA) 5.2 40 days median Functional polymers, biomacromolecules, responsive polymer networks
Materials Today Communications Elsevier Hybrid (Subscription / Optional OA) 3.7 43 days median Broad materials science, synthetic characterization, engineering alloys
Composites Science and Technology Elsevier Hybrid (Subscription / Optional OA) 9.1 38 days median Fundamental physics of composite materials, fracture, multiscale modeling

Researchers seeking free publishing routes can submit to hybrid journals such as Composites Part B or Composites Science and Technology under the subscription publishing model, where accepted papers are published behind institutional paywalls without charging author APCs. Conversely, scholars with dedicated open access funding seeking specialized hybrid materials audiences find a direct topical match in Advanced Composites and Hybrid Materials. The data table below compares additional operational parameters across these competitive titles.

Frequently asked questions

What is the current impact factor of Advanced Composites and Hybrid Materials?

The 2025 Journal Impact Factor for Advanced Composites and Hybrid Materials is 15.5, with a 5-year Journal Impact Factor of 14.3, according to Clarivate Journal Citation Reports. The journal is categorized within the first quartile (Q1) across materials science and polymer disciplines.

Who publishes Advanced Composites and Hybrid Materials?

Advanced Composites and Hybrid Materials is published by Springer Nature under the imprint of Springer Nature Switzerland AG (Springer-Verlag). The journal’s editorial leadership is headed by Editor-in-Chief Professor Tony McNally at the University of Warwick, United Kingdom.

What peer-review model does the journal use?

The journal operates a single-blind peer-review model. In this framework, the identities of peer reviewers remain anonymous to the submitting authors, while the reviewers have access to author names and institutional affiliations during their evaluation.

What is the article processing charge (APC) for Advanced Composites and Hybrid Materials?

The standard Article Processing Charge for accepted manuscripts is $3,490.00 USD, £2,490.00 GBP, or €2,790.00 EUR, plus applicable local taxes or VAT. Authors may qualify for fee waivers through Springer Nature transformative institutional agreements or World Bank low-income country policies.

Is Advanced Composites and Hybrid Materials indexed in DOAJ and Scopus?

The journal is comprehensively indexed in Scopus, SCIE (Web of Science), EI Compendex, CAS, and INSPEC. However, it is not currently indexed in the Directory of Open Access Journals (DOAJ).

Can authors request an APC waiver for Advanced Composites and Hybrid Materials?

Yes. Automatic waivers apply to corresponding authors based in World Bank low-income nations. Other authors experiencing financial hardship may apply for a discretionary waiver, but the formal application must be submitted during initial manuscript submission rather than after peer review acceptance.

Sources

Data: Advanced Materials and Composites Journals: Key Metrics, APC, and Publishing Models

Comparative benchmark of leading international peer-reviewed journals in composites, polymers, and hybrid materials, detailing 2025 Journal Impact Factor, open access publishing model, article processing charges, peer-review format, median decision speed, and major indexing status, compiled from publisher policy pages and official bibliographic records as of 2026-11-19.

Period covered: 2024/2026. Coverage: Global.

Advanced Materials and Composites Journals: Key Metrics, APC, and Publishing Models
Journal TitlePublisherJournal Impact Factor (JIF 2025)5-Year Impact Factor (JIF)Publishing ModelArticle Processing Charge (USD)Peer Review ModelSubmission to First Decision (days)DOAJ Indexed
Advanced Composites and Hybrid MaterialsSpringer Nature15.514.3Fully Open Access3490Single-blind47No
Composites Part B: EngineeringElsevier BV1414.5Hybrid (Subscription / OA)5210Single-blind34No
ACS Applied Polymer MaterialsAmerican Chemical Society5.25.4Hybrid (Subscription / OA)4500Single-blind40No
Composites Science and TechnologyElsevier BV9.19.8Hybrid (Subscription / OA)4610Single-blind38No
Materials Today CommunicationsElsevier BV3.73.7Hybrid (Subscription / OA)2780Single-blind43No

Follow CASRAI

Research-administration guidance, standards updates and independent tool reviews.

Ask CASRAI · free to try

Ask about Advanced Composites and Hybrid Materials: Journal Guide

2 free questions a day, no account.

An AI assistant for research: funder rules, compliance, methods and publishing. It links the sources behind its answers and labels answers that come from a web search.

Answers draw on CASRAI's guides and dictionary plus the federal and funder documents we index: Federal Register, Grants.gov, Regulations.gov and UKRI.

Works on this site and inside Claude, Cursor and the AI tools you already use.

Everything CASRAI publishes — this page, the dictionary, the guides and the news — stays open to read, with no account and no card.

Referenced across the research world

University of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logoUniversity of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logo
  • University of Cambridge logo
  • Columbia University logo
  • Crossref logo
  • University of Edinburgh logo
  • Harvard University logo
  • University of Oxford logo
  • Princeton University logo
  • Stanford School of Medicine logo
  • University College London logo
  • ORCID logo

View CASRAI adoption →