Written and maintained by CASRAI Editorial Board
Published
On this page
Composites Part B: Engineering is a premier peer-reviewed scholarly journal published by Elsevier that disseminates advanced research at the intersection of engineering mechanics, materials science, and composite structures. Carrying an official ISO 4 abbreviation of Compos. Part B Eng. and holding a 2026 Clarivate Journal Impact Factor of 14.0 with a Scopus CiteScore of 24.2, the journal operates as a transformative hybrid journal where authors may publish through standard subscription access at zero cost or select Gold Open Access with an article publication charge (APC) of $5,210 USD. This authoritative author guide covers journal aims and scope, editorial leadership, manuscript submission steps through Editorial Manager, formatting rules, and comparative bibliometric benchmarks across advanced composite engineering publications.
What it is
Composites Part B: Engineering (commonly queried in academic searches as composites part b, composites part b engineering, or composites part b: engineering) is an international scholarly journal established to bridge the gap between fundamental materials science and applied engineering mechanics in composite material systems. Originally branched from the long-standing Elsevier journal Composites in the mid-1990s alongside its sister title Composites Part A: Applied Science and Manufacturing, Part B was deliberately positioned to emphasize structural mechanics, performance under operational loads, engineering design methodologies, and practical fabrication at component and system scales.
The journal is catalogued under Print ISSN 1359-8368 and Electronic ISSN 1879-1069. It is indexed in major academic citation databases, including Clarivate’s Science Citation Index Expanded (SCIE), Scopus, Ei Compendex, Inspec, and Web of Science. In academic bibliometrics, Composites Part B ranks consistently within the first quartile (Q1) across both Materials Science (Composites) and Engineering (Mechanical/Civil/Aerospace) categories. Its high citation impact reflects strong global readership and citation velocity among university laboratories, national research institutes, and industrial research and development centers in aerospace, automotive, energy, and defense sectors.
Unlike general materials science journals such as Materials Letters, which prioritize rapid communications and novel microstructural syntheses across all material classes, Composites Part B requires in-depth mechanical rigor, quantitative constitutive modeling, and structural performance validation. The journal primarily publishes original full-length research papers, authoritative review articles, and occasional short communications addressing urgent technical breakthroughs.
Who runs it and what it covers
Composites Part B: Engineering is published by Elsevier BV and managed through its physical sciences and engineering publishing division. The journal is led by Editor-in-Chief Professor Uday Vaidya (University of Tennessee, Knoxville and Oak Ridge National Laboratory), supported by a globally distributed team of Associate Editors and an international Editorial Board comprising leading researchers from North America, Europe, and the Asia-Pacific region. The editorial board oversees a stringent single-blind and double-blind optional peer review system designed to maintain scientific reproducibility and technical rigor.
The topical scope of Composites Part B encompasses multi-scale structural and mechanical investigations of all composite material classes. Core subject areas include:
- Polymer Matrix Composites (PMCs): Thermoset and thermoplastic carbon fiber, glass fiber, and aramid composites, focusing on mechanical characterization, fatigue life, fracture toughness, impact resistance, and environmental durability.
- Ceramic Matrix Composites (CMCs) and Metal Matrix Composites (MMCs): High-temperature structural behavior, oxidation kinetics, thermal shock resistance, and microstructural damage mechanics under extreme mechanical and environmental conditions.
- Additive Manufacturing of Composites: Continuous fiber 3D printing, short-fiber reinforcement alignment, fused filament fabrication, stereolithography of nanocomposites, defect genesis, and process-property optimization.
- Multifunctional and Smart Composites: Electrically conductive composites, electromagnetic interference (EMI) shielding, self-healing polymers, shape memory alloys embedded in laminates, structural health monitoring, and integrated sensor networks.
- Structural Joining and Adhesive Bonding: Bonded joints, bolted composite connections, co-curing techniques, interfacial fracture mechanics, adhesive failure criteria, and hybrid metal-composite structural assemblies.
- Computational Mechanics and Multi-Scale Modeling: Finite element analysis (FEA), cohesive zone modeling (CZM), representative volume element (RVE) micromechanics, machine learning for composite design, and damage progression algorithms.
- Sustainable and Bio-Composites: Bio-based resins, natural plant fiber reinforcements, recyclability, life-cycle engineering, and circular economy composite design where clear structural engineering utility is demonstrated.
The editors apply strict desk-rejection filters. Manuscripts are immediately rejected without external review if they present routine synthetic chemistry without mechanical evaluation, minor recipe modifications to standard resins, purely descriptive testing without physical mechanism elucidation, or theoretical models lacking experimental calibration and physical validation. For manufacturing-focused studies, authors often consider whether their work aligns better with specialized production engineering venues such as the Journal of Materials Processing Technology.
How to search or use it
Researchers interact with Composites Part B: Engineering through two primary interfaces: Elsevier ScienceDirect for literature discovery and reading, and Elsevier Editorial Manager for manuscript submission and peer review tracking. The following step-by-step workflow outlines how prospective authors prepare, submit, and track their manuscripts through the official portal:
- Access the Editorial Portal: Navigate to the official submission gateway via ScienceDirect by selecting ‘Submit Your Paper’, which directs to the Composites Part B Editorial Manager portal (editorialmanager.com/jcomb). Authors log in using their Elsevier profile credentials or create an account linked to their active ORCID identifier.
- Select Article Type and Section: Choose the appropriate manuscript category from the dropdown menu: Full Length Article, Review Article, or Short Communication. Review articles typically require a pre-submission inquiry or invitation from the Editor-in-Chief accompanied by an outline and author track record summary.
- Upload Required Manuscript Files: Upload the primary source documents in Microsoft Word (.docx) or LaTeX format (.tex with accompanying .bib and figure files). Ensure figures are provided in high resolution (minimum 300 DPI for photographs, 600 DPI for combination charts, and 1000 DPI for vector line art) formatted as EPS, TIFF, or high-grade PDF.
- Attach Mandatory Accompanying Declarations: Upload a formal Cover Letter that explicitly articulates the novel engineering contribution, the underlying physical mechanisms discovered, and why the work fits within the Part B scope. Supply a separate Graphical Abstract highlighting the visual summary of findings and a bulleted Highlights document containing 3 to 5 concise findings (maximum 85 characters per bullet).
- Enter Metadata and CRediT Author Contributions: Input manuscript title, abstract (strictly under 250 words), and 4 to 6 indexed keywords. Complete the CRediT (Contributor Roles Taxonomy) matrix assigning specific roles (such as Conceptualization, Methodology, Software, Validation, Formal Analysis, and Investigation) to each co-author.
- Submit Data Availability and Conflict Statements: Complete the mandatory Elsevier declaration questionnaires regarding Data Availability (selecting whether datasets are deposited in a public repository like Mendeley Data, available on request, or included within the article) and Conflict of Interest.
- Nominate Qualified Peer Reviewers: Provide names, current institutional email addresses, and departmental affiliations for 4 to 6 independent potential reviewers. Nominees must not have collaborated with any co-author within the past three years or share an institutional conflict. Opposed reviewers may also be specified.
- Select Publishing Model and Approve Submission: Indicate whether you plan to utilize subscription publishing or Gold Open Access if accepted. Generate the merged submission PDF, review every page for formatting and symbol fidelity, and click ‘I Approve This Submission’ to transmit the manuscript to the editorial office.
Following submission, the author dashboard displays real-time tracking statuses: ‘Submitted to Journal’, ‘With Editor’, ‘Under Review’, ‘Required Reviews Complete’, and ‘Decision in Process’. Authors can track how many peer reviewers have accepted invitations and submitted reports.
Strengths and limits
Composites Part B: Engineering holds distinct competitive advantages as well as operational constraints that researchers should weigh when selecting a publication venue for their composite mechanics research:
Strengths:
- High Bibliometric Standing: With an Impact Factor of 14.0, a 5-Year Impact Factor of 14.5, and a CiteScore of 24.2, papers published in Part B enjoy exceptional visibility and citation velocity within the global structural materials community.
- Broad Global Indexing: Complete coverage in SCIE, Scopus, Ei Compendex, and Google Scholar ensures maximum discoverability across engineering departments and industrial research organizations worldwide.
- Hybrid Publishing Flexibility: The journal’s transformative hybrid model guarantees that lack of grant funding or institutional open access subsidies does not prevent publication; authors can choose traditional subscription dissemination without paying any page fees.
- Rigorous Editorial Quality: Experienced subject editors ensure constructive, high-caliber peer review reports that frequently enhance the depth and analytical clarity of accepted papers.
Limits:
- High Desk-Rejection Rate: Due to an enormous annual submission volume exceeding several thousand manuscripts, the editors triage aggressively. Papers with purely incremental findings or insufficient engineering context are desk-rejected within 5 to 10 days.
- Substantial Article Processing Charges: For researchers whose funders mandate immediate open access (such as Plan S signatories), the Gold OA fee of $5,210 USD represents a significant budget expenditure unless covered by institutional transformative read-and-publish agreements.
- Multi-Round Review Timelines: While initial desk decisions are rapid, comprehensive peer review and subsequent technical revisions can require between 3 and 6 months from first submission to final online appearance.
- Rigid Scope Boundaries: Highly theoretical papers that do not demonstrate clear macroscopic or component-level structural relevance will be redirected to pure physics, mechanics, or chemistry journals.
Alternatives
Authors preparing papers in composite science and materials engineering have several high-quality alternatives to Composites Part B. Choosing the optimal venue depends on whether the manuscript emphasizes fabrication kinetics, microstructural physics, civil/aerospace structures, or rapid short-format announcements. The comparative table below summarizes key alternative journals in the discipline:
| Journal Name | Publisher | Primary Focus / Scope | Publishing Model | Best Fit When |
|---|---|---|---|---|
| Composites Part B: Engineering | Elsevier | Structural engineering, multi-scale mechanics, failure analysis, component performance | Hybrid (Subscription or Gold OA) | Research connects micro-mechanics to macroscopic engineering components and structural durability |
| Composites Part A: Applied Science and Manufacturing | Elsevier | Manufacturing processes, resin transfer molding, interface science, prepregs, recycling | Hybrid (Subscription or Gold OA) | Study centers on manufacturing kinetics, processing science, or fiber-matrix surface modifications |
| Composites Science and Technology | Elsevier | Fundamental materials science, polymer physics, nanoscale reinforcements, interfacial phenomena | Hybrid (Subscription or Gold OA) | Work focuses on fundamental physical discoveries, nanoscale mechanisms, and fundamental constitutive behavior |
| Composite Structures | Elsevier | Structural design, plate/shell buckling, finite element structural analysis, civil and aero assemblies | Hybrid (Subscription or Gold OA) | Manuscript addresses large-scale structural modeling, beam/plate formulations, and joint mechanics |
| Journal of Composite Materials | SAGE Publishing | General composite materials science, analytical modeling, experimental testing | Hybrid (Subscription or Gold OA) | Looking for a foundational composite journal with broad experimental and theoretical scope |
| Composites Communications | Elsevier | Short-format letters, rapid communications, emerging composite discoveries | Hybrid (Subscription or Gold OA) | Fast-breaking discoveries requiring concise, accelerated publication rather than exhaustive papers |
To further examine comparative publishing metrics, the data table below benchmarks Composites Part B against these peer titles using verified bibliometric records compiled from OpenAlex and Crossref data deposits, illustrating open access pricing, 2-year citation averages, and publication volumes.
Author Decision Framework: Triaging Your Composite Research Submission
When deciding whether to submit a new manuscript to Composites Part B: Engineering versus an alternative title, research teams can apply a three-point triage rubric:
- Scale and Application Test: Does the study include structural testing, component-level finite element simulations, or environmental service life predictions? If the investigation stops at chemical synthesis of a novel monomer or characterization of an unreinforced resin droplet, submit to a dedicated polymer chemistry journal. If it demonstrates mechanical reinforcement in a structural laminate, Part B is suitable.
- Manufacturing vs. Performance Emphasis: If the primary intellectual novelty lies in the manufacturing technique (such as vacuum infusion resin flow optimization, cure cycle thermal kinetics, or automated fiber placement dynamics), Composites Part A is the preferred sibling journal. If the novelty resides in how the finished composite withstands multi-axial fatigue, impact, or ballistic loads, Part B is the exact target.
- Depth of Experimental and Numerical Coupling: Purely numerical papers with no experimental benchmark data face steep desk-rejection hurdles at Part B. Ensure the manuscript presents either calibrated multi-scale modeling backed by rigorous physical testing or extensive experimental datasets explained through quantitative mechanics.
Reference Formatting and Technical Style Requirements
Manuscripts submitted to Composites Part B must adhere to Elsevier’s numbered reference conventions. References are cited in the body text using Arabic numerals enclosed in square brackets (e.g., [1], [2,3], or [4-7]). In the reference list, entries are ordered sequentially as they appear in the text. Standard journal citations include author surnames with initials, full paper title, standard ISO journal abbreviation (e.g., Compos. Part B Eng.), publication year, volume number, and page range or article number, followed by the permanent Digital Object Identifier (DOI). Authors utilizing reference management software (such as EndNote, Zotero, or Mendeley) should select the ‘Elsevier – With Titles’ or ‘Numbered’ output style.
Frequently asked questions
What is the impact factor of Composites Part B: Engineering?
Composites Part B: Engineering has a Clarivate Journal Impact Factor of 14.0 and a 5-Year Impact Factor of 14.5. Its Scopus CiteScore is 24.2, ranking it consistently in the first quartile (Q1) across materials science and mechanical engineering disciplines.
Is Composites Part B an open access or subscription journal?
Composites Part B operates as a hybrid journal. Authors have the choice upon manuscript acceptance to publish under the traditional subscription model at no cost to the author, or to select Gold Open Access by paying an article publishing charge of $5,210 USD, which makes the final article freely available under a Creative Commons license.
What is the difference between Composites Part A and Composites Part B?
While both are top-tier Elsevier journals, Composites Part A: Applied Science and Manufacturing focuses on manufacturing science, processing technologies, interface physics, and material fabrication. In contrast, Composites Part B: Engineering emphasizes engineering mechanics, structural analysis, component design, failure mechanisms, and multi-scale load-bearing performance.
What reference style does Composites Part B use?
Composites Part B utilizes a numbered reference citation style. Citations appear in square brackets in order of appearance in the text, and the bibliography provides numbered references including author names, full article titles, ISO journal abbreviations, publication year, volume, page or article numbers, and DOIs.
What are the primary reasons manuscripts are desk rejected by Composites Part B?
The most common reasons for immediate desk rejection include: lack of engineering or structural relevance, purely incremental material modifications without scientific breakthroughs, absence of experimental validation for numerical models, or submission of purely chemical synthesis papers without mechanical mechanism evaluation.
Does Composites Part B accept unsolicited review articles?
Composites Part B generally requires prospective review authors to submit a pre-submission inquiry to the Editor-in-Chief. The inquiry must include a detailed structural outline, rationale for the timeliness of the review, comparison against existing reviews in the past five years, and a summary of the author team’s prior publication record in the field.
Sources
- Elsevier ScienceDirect: Composites Part B: Engineering Journal Overview and Guide for Authors (https://www.sciencedirect.com/journal/composites-part-b-engineering, accessed 2026-11-16).
- Elsevier Open Access Pricing List: Article Publishing Charges for Hybrid and Gold Journals (https://www.elsevier.com/about/policies-and-standards/pricing, accessed 2026-11-16).
- OpenAlex Scholarly Metadata Source Record: Composites Part B Engineering (ISSN 1359-8368) (https://api.openalex.org/sources/issn:1359-8368, accessed 2026-11-16).
- Crossref Journal Title Deposit Record: Composites Part B: Engineering (ISSN 1359-8368) (https://api.crossref.org/journals/1359-8368, accessed 2026-11-16).
- ISSN International Centre: Key Title Record for Composites Part B: Engineering (https://portal.issn.org/resource/ISSN/1359-8368, accessed 2026-11-16).
- Clarivate Journal Citation Reports: Materials Science, Composites and Engineering Categories (https://jcr.clarivate.com, accessed 2026-11-16).
Data: Advanced Composites Scholarly Journals: Impact Metrics, Publishing Models, and Open Access Fees
Comparative benchmarking dataset evaluating Composites Part B: Engineering against leading peer journals in composite materials and structural engineering. Compiled from OpenAlex and Crossref records accessed on 2026-11-16, tracking publishing models, Gold Open Access Article Processing Charges (USD), two-year mean citation rates, h-index benchmarks, and indexed publication volumes.
Period covered: 1996/2026. Coverage: Global.
| Journal Title | Publisher | Publishing Model | Gold OA APC (USD) | Two-Year Mean Citedness | h-index | Total Works Indexed |
|---|---|---|---|---|---|---|
| Composites Part B: Engineering | Elsevier BV | Hybrid | 5210 | 14.33 | 267 | 13904 |
| Composites Part A: Applied Science and Manufacturing | Elsevier BV | Hybrid | 4480 | 8.74 | 258 | 10592 |
| Composites Science and Technology | Elsevier BV | Hybrid | 4610 | 10.05 | 286 | 12434 |
| Composite Structures | Elsevier BV | Hybrid | 4660 | 8.01 | 240 | 20109 |
| Journal of Composite Materials | SAGE Publishing | Hybrid | 4150 | 2.96 | 186 | 8587 |
| Composites Communications | Elsevier BV | Hybrid | 4070 | 8.71 | 91 | 2792 |
Sources
- OpenAlex Scholarly Metadata Source Record: Composites Part B Engineering (ISSN 1359-8368) (accessed 2026-11-16)
- OpenAlex Scholarly Metadata Source Record: Composites Part A Applied Science and Manufacturing (ISSN 1359-835X) (accessed 2026-11-16)
- OpenAlex Scholarly Metadata Source Record: Composites Science and Technology (ISSN 0266-3538) (accessed 2026-11-16)
- OpenAlex Scholarly Metadata Source Record: Composite Structures (ISSN 0263-8223) (accessed 2026-11-16)
- OpenAlex Scholarly Metadata Source Record: Journal of Composite Materials (ISSN 0021-9983) (accessed 2026-11-16)
- OpenAlex Scholarly Metadata Source Record: Composites Communications (ISSN 2452-2139) (accessed 2026-11-16)
- Crossref Journal Metadata Deposit Record: Composites Part B Engineering (accessed 2026-11-16)
Compiled by CASRAI from the sources above. Free to reuse under CC BY 4.0 with attribution.







