Written and maintained by CASRAI Editorial Board
Published · Last updated
On this page
To type the angstrom symbol (Å) in LaTeX, use the kernel command \AA in ordinary text. In a document that uses the siunitx package, write a measurement as \qty{1.54}{\angstrom}; in XeLaTeX or LuaLaTeX you can also type the character Å directly. Which one to choose depends on whether the symbol stands alone in text, belongs to a number with a unit, or sits inside a formula.
The page below covers each method, a worked set of commands, what the output looks like, why the symbol sometimes fails to appear, and a change in the current siunitx manual that affects how \angstrom should be used in long-lived documents. The data table below the sections lists each command with the documentation that describes it.
What it is used for in research
The ångström (symbol Å) equals 0.1 nanometre. It is still the working length unit in crystallography, structural biology and atomic and molecular physics, so bond lengths, lattice parameters and wavelengths often appear as values such as 1.54 Å. Our guide to SI units in scientific writing explains why crystallography keeps the unit even though it is not a base or coherent SI unit. In a LaTeX manuscript the practical question is how to set the symbol so that it prints correctly, keeps a sensible space after the number and does not break across a line.
How to install or access it
Two of the methods need nothing beyond a standard LaTeX installation: \AA is part of the LaTeX kernel and is listed in the LaTeX2e reference manual (tug.org/texinfohtml/latex2e.html, section “Additional Latin letters”) as producing å and Å. The same section lists \r as the ring accent command, and the math accents section lists \mathring.
For unit-aware typesetting you need the siunitx package, distributed through CTAN (ctan.org/pkg/siunitx) and included in common TeX distributions. Load it in the preamble:
\usepackage{siunitx}
On Overleaf, siunitx is available without installation, and all text files are UTF-8 encoded according to the Overleaf documentation on file encodings, which matters for the direct-Unicode method described below.
Step-by-step task: set an angstrom value in a document
- Standalone symbol in running text. Write
bond length of 1.54~\AA. The tilde is an unbreakable space, so the number and the symbol stay on the same line. The command\AAproduces the capital A with ring. - Number plus unit with siunitx. Load siunitx, then write
\qty{1.54}{\angstrom}. The manual documents the form\qty{number}{unit}, with the example\qty{3.1415}{\degree}; the same grammar applies to\angstrom. - A range. The manual documents
\qtyrange{0.13}{0.67}{\milli\metre}, so a range in angstroms is written\qtyrange{1.5}{2.5}{\angstrom}. - A list of values. The manual documents
\qtylist{0.13;0.67;0.80}{\milli\metre}; with angstroms,\qtylist{1.2;1.5;1.9}{\angstrom}. - Unit alone, for an axis label or table header. Use
\unit{\angstrom}, following the manual’s\unit{...}form for a unit without a number. - Decide about long-term stability. See the next section; for a manuscript you expect to recompile for years, define the unit yourself.
- Compile and check the output. Confirm the symbol prints as Å, with a thin space between number and unit, and read the log for information messages.
Steps 2 to 5 apply the documented siunitx grammar to the \angstrom macro; the manual’s own examples use other units.
Angstrom in LaTeX inside math mode
The question “angstrom in LaTeX” often comes from a formula such as a lattice relation where Å must appear inside $...$. \AA is a text-mode letter command (the LaTeX2e reference lists it under additional Latin letters, not under math symbols). Two options follow from the reference manual: wrap it as \text{\AA} (the \text command comes from the amsmath package), or build the symbol with the math ring accent, \mathring{A}. The siunitx route avoids the problem because \qty and \unit handle the symbol for you: $a = \qty{3.92}{\angstrom}$.
Output and how to read it
Each method yields the same visible glyph, a capital A with a ring above it, but the spacing differs. With \AA you control the space yourself. With siunitx, the package inserts a thin space between number and unit and formats the number according to its own options. The unit-macro route is also the only one that lets you change the symbol or its formatting once for the whole document.
Per the siunitx source, the compatibility layer maps \angstrom to the Unicode character U+00C5. When the fontspec package is loaded (typical for XeLaTeX and LuaLaTeX documents), the character prints directly; otherwise it is wrapped in \text.
The siunitx information message and the recommended definition
The siunitx manual (changelog version 3.6.7, dated 2026-11-06, read 2026-11-12) explains that the ångström was listed in the 8th edition of the BIPM SI Brochure among units accepted for specialist fields. It was removed from the 9th edition and re-added in the June 2026 update in a non-exhaustive table, which the manual says suggests it may not remain permanently. As a result, the siunitx unit macros “remain available but issue an information message on first use”, and the manual recommends that users add their own definitions at the start of their sources for long-term stability.
The manual does not print a definition for \angstrom, but it documents the mechanism: \DeclareSIUnit overwrites a pre-defined unit after the package is loaded, with examples such as \DeclareSIUnit\kWh{kWh}. Applying that mechanism, an example of your own definition is:
\usepackage{siunitx}\DeclareSIUnit\angstrom{\text{\AA}}
This example is our application of the documented command, not text copied from the manual. After it, \qty{1.54}{\angstrom} works as before and no longer depends on the package’s built-in definition.
Troubleshooting
The symbol shows as a missing or garbled character
The cause is usually the engine and input encoding. The Overleaf documentation states that pdfLaTeX can typeset most accented letters and some symbols typed directly when UTF-8 input is declared with \usepackage[utf8]{inputenc}, that TeX does not know how to typeset all UTF-8 characters, and that XeLaTeX or LuaLaTeX support Unicode characters natively. It also states that as of TeX Live 2022, UTF-8 input is the default for pdfLaTeX and LaTeX, so the inputenc line is no longer needed there. If you work with an older distribution, add it; otherwise use \AA, which does not depend on input encoding at all.
A message about \angstrom appears in the log
That is the first-use information message described above. It is not an error. Define the unit yourself, as shown, if you want to remove the dependency on the package default.
The symbol misbehaves inside a formula
Use \text{\AA}, \mathring{A} or the siunitx macros, since \AA is a text-mode command.
The unit is not recognised
Check that siunitx is loaded and that you wrote \angstrom inside the second argument of \qty or inside \unit, not in the number argument.
If you also need degree symbols, the sibling guide degree symbol in LaTeX follows the same pattern.
Free alternatives
All methods below are free; they differ in what they depend on. Each row traces to the documentation named in the last column.
| Method | Mode | Depends on | Documented in |
|---|---|---|---|
\AA |
Text | LaTeX kernel only | LaTeX2e reference, Additional Latin letters |
\r{A} |
Text | LaTeX kernel only | LaTeX2e reference, Accents (ring accent) |
\mathring{A} |
Math | LaTeX kernel only | LaTeX2e reference, Math accents |
\angstrom with \qty or \unit |
Both | siunitx package | siunitx manual; information message on first use |
| Typed character Å | Text | UTF-8 input (default since TeX Live 2022 for pdfLaTeX); native in XeLaTeX and LuaLaTeX | Overleaf documentation, file encodings |
FAQ
How do you write the angstrom symbol in LaTeX?
Use \AA in text, or \qty{1.54}{\angstrom} with siunitx for a number with its unit.
How do you write angstrom in LaTeX inside an equation?
Use \text{\AA} or \mathring{A}, or put the value through siunitx. \AA alone is a text-mode command.
Is the angstrom still an accepted unit?
According to the current siunitx manual, the 9th SI Brochure edition removed it and the June 2026 update re-added it in a non-exhaustive table. The manual advises defining your own macro for long-term stability.
Can I just paste Å into my source file?
Yes with XeLaTeX or LuaLaTeX, and with pdfLaTeX from TeX Live 2022 onward, since UTF-8 is the default input there. Overleaf saves all text files as UTF-8.
What is the difference between \AA and \r{A}?
Both are text-mode and print a capital A with a ring. \AA is the dedicated letter command; \r is the general ring accent that can be applied to other letters.
Sources
- siunitx package manual and source, CTAN: ctan.org/pkg/siunitx, changelog version 3.6.7 (2026-11-06), read 2026-11-12.
- LaTeX2e: An unofficial reference manual, TUG: tug.org/texinfohtml/latex2e.html, read 2026-11-12.
- Overleaf documentation, File encodings and line endings: docs.overleaf.com, read 2026-11-12.
Related reading on this site: SI units in scientific writing, degree symbol in LaTeX, IEEE format in LaTeX.
Data: LaTeX commands for the angstrom symbol and their documentation category
Compares the five documented ways to produce the angstrom symbol in LaTeX by the documentation section that lists each command and the engine or package assumption stated there. Compiled from the LaTeX2e reference manual, the siunitx manual and the Overleaf encodings documentation.
Period covered: 2026.
| Command or method | Documentation section | Stated assumption |
|---|---|---|
| \AA | LaTeX2e reference: Additional Latin letters | Text-mode letter command; yields Å |
| \r{A} | LaTeX2e reference: Accents | Ring accent applied to A |
| \mathring{A} | LaTeX2e reference: Math accents | Math ring accent |
| \angstrom | siunitx manual: Unit changes made by BIPM | Information message on first use; own definition recommended |
| Typed Å | Overleaf docs: File encodings | UTF-8 input; default for pdfLaTeX since TeX Live 2022; native in XeLaTeX and LuaLaTeX |
Sources
- LaTeX2e unofficial reference manual (accessed 2026-11-12)
- siunitx package (CTAN) (accessed 2026-11-12)
- Overleaf: File encodings and line endings (accessed 2026-11-12)
Compiled by CASRAI from the sources above. Free to reuse under CC BY 4.0 with attribution.







