Written and maintained by CASRAI Editorial Board
Published
On this page
APL Materials is AIP Publishing’s gold open access materials science journal, identified by online ISSN 2166-532X. It publishes original research and several interpretive article types. Its broad scope comes with specific expectations for experimental evidence, reproducibility and significance; the journal facts and author requirements below connect those expectations to the publisher’s instructions.
What it is
APL Materials is a journal rather than a general literature database. Its articles are hosted on AIP Publishing’s journal site, where readers can browse issues and subject collections. The publisher’s overview records a launch year of 2013 and describes a gold open access model: published articles can be read, downloaded and shared without a subscription, and authors retain copyright.
The publication charges page specifies the Creative Commons Attribution 4.0 International license, or CC BY 4.0. That license permits reuse with attribution. Reader access and the cost of publishing are separate questions: an article can be freely readable while its authors face a publication charge.
Keep the full title and ISSN together when recording a prospective journal in a submission plan. AIP’s directory lists APL Materials and Applied Physics Letters as separate titles with separate identifiers. Requirements from the latter’s author instructions should therefore not be carried over simply because both names contain APL.
Who runs it and what it covers
AIP Publishing publishes APL Materials. The journal home page names Bo Wang as Editor-in-Chief, while its editorial policies assign responsibility for editorial matters to the Editor-in-Chief and Associate Editors. The journal publishes 12 issues per year.
The scope crosses material dimensions, properties and applications. Its overview includes nanoparticles, nanowires, thin films and more complex nanostructures; optical, electronic and magnetic materials; energy storage and conversion; smart materials and biomaterials; and functional materials such as polymers, composites, catalysts and quantum materials. These are examples of the journal’s coverage, rather than a requirement that a manuscript address every category.
A particularly consequential scope condition concerns theory and computation. The overview welcomes those works when experimental data or findings are also reported. For a computational materials manuscript, that condition deserves attention alongside topical overlap: a relevant material name alone does not establish that the work meets the journal’s stated expectations.
The editorial criteria also call for evidence supporting the conclusions, original information with significant impact, and timely interest for researchers within and across disciplines. These criteria explain why a paper can be within the subject area yet still face an editorial suitability decision.
APL Materials impact factor
AIP’s overview reports a Journal Impact Factor of 4.5 under its heading for the 2025 Journal Citation Reports, published by Clarivate in 2026. The same table gives a five-year Impact Factor of 5.2 and Q2 rankings in Materials Science, Multidisciplinary; Nanoscience and Nanotechnology; and Physics, Applied.
Its separately labelled 2025 Scopus data give a CiteScore of 7.3. Preserve both the metric’s name and year when quoting a value. The comparison of CiteScore and Journal Impact Factor explains why the two measures should not be treated as interchangeable scores.
AIP’s materials science portfolio lists Web of Science and Scopus as indexing services for APL Materials. That is the publisher’s coverage statement; its metrics table separately identifies the sources and years of the reported figures.
How to search or use it
Readers can use the journal’s Browse menu to open Newest Issue or All Issues. Collections provides routes such as Perspectives, Research Updates, Roadmaps and Special Topics. These routes serve different reading tasks: issues organize the publication record, while named collections bring together particular forms of contribution or topics. A Sign In option appears in the site header.
For authors, the official journal page and AIP’s author instructions support this preparation sequence:
- Read Overview and Editorial Policies. Match the research topic, evidence and significance to the journal’s scope and publication criteria before preparing a submission.
- Choose the article type. Consult the descriptions of Articles, Perspectives, Reviews, Accounts and Roadmaps. The editors encourage a Roadmap proposal before authors begin writing or submit the full article.
- Open Preparing Your Manuscript and Journal Specific Guidelines. Both the general requirements and the APL Materials section matter. The latter uses APM as the journal abbreviation.
- Prepare the manuscript package. AIP supports Word or LaTeX preparation. For initial submission it requests a single compiled manuscript PDF and, when applicable, a separate supplementary material PDF. Its general instructions also require accessible figures and tables with alt text.
- Complete declarations and data information. Assemble the conflict of interest statement, ethics information where applicable, author contributions and data availability statement. Obtain agreement from the authors on their contributions.
- Review Publication Charges. The journal’s charges page states an APC of USD 2,750 for published papers. Record that publication policy separately from the editorial decision. The guide to article processing charges explains the wider terminology.
- Use Submit Your Manuscript. The journal’s Publish With Us menu links to its submission site at aplmaterials.peerx-press.org. Use that journal-specific destination after completing the checks above.
Manuscript length and article types
The APM instructions say there are no article length restrictions, then provide guidance for individual types. A regular article’s main text should be approximately 3,500 words, excluding title and references, while remaining concise and sufficiently clear for reproducibility. The guidance for Perspectives, Research Updates and Commentaries is less than 5,500 words; Comments and Responses should not exceed 1,000 words.
These instructions should be read alongside the editorial descriptions. A Perspective emphasizes an expert view of future developments. A Review surveys recent progress. An Account centers on the author’s research experience and contributions. A Roadmap combines expert perspectives on a field’s status, advances, challenges and direction. Selecting a type therefore involves the purpose and organization of the paper as well as its length.
Author contributions and data availability
AIP’s author ethics policy requires the corresponding author to ensure that coauthors approve the manuscript and agree to their individual contributions. It also says that CRediT contributor roles describe contributions without changing the criteria for authorship. A role assignment and approval of the author list are related responsibilities, but neither substitutes for the other.
The Research Data Policy requires a data availability statement for research published in AIP journals. Its templates distinguish data in a repository, data within the article or supplement, data supplied on request, restrictions and cases where no new data were generated. Use the statement matching the actual arrangement. For linked datasets, the policy also calls for a reference-list citation containing the creator, year, title, publisher and identifier.
The data availability statement guide provides further context for describing access clearly. AIP’s policy names APL Computational Physics and APL Machine Learning as journals with a separate compulsory public data or code deposition rule at submission. That specific requirement should not be inferred for APL Materials from its shared publisher.
How peer review works
The journal’s editorial team first examines a submission for suitability. Appropriate manuscripts go to expert reviewers for evaluation, and the editors retain authority over publication decisions. The policy describes decisions as typically following one review round; it does not promise that every submission will follow an identical path.
Special Topic submissions undergo the journal’s usual review process. Accepted contributions appear in regular issues and are also assembled on a virtual collection page. A collection invitation or thematic match therefore does not replace the normal editorial assessment.
If a manuscript is declined, an editor may recommend transfer to another AIP journal. The manuscript, reports and editorial recommendations can travel together, but the receiving journal applies its own criteria and acceptance is not guaranteed. An appeal instead goes through the APL Materials submission site with a revised manuscript and a concise appeal letter of one page or less, addressing suitability or the technical grounds for rejection.
Strengths and limits
The journal combines broad materials coverage with open reader access and several article formats. For a researcher communicating experimental findings across materials subfields, that combination creates a potential fit. For a group planning a field overview, the distinctions between a Review, Perspective and Roadmap offer more specific options than treating every contribution as an ordinary research article.
Those opportunities have boundaries. The stated experimental component matters for theoretical or computational work, and the novelty and significance criteria matter even for technically careful studies. Open access removes the reader subscription requirement, while the APC remains a separate author-side consideration. The charges policy states that ability to pay does not influence acceptance and that editors and reviewers cannot access author payment information.
The publisher’s 2025 publication-speed figures are averages: 34 days to first decision, 87 to acceptance and 107 to publication, with variation by article type. Treat them as three distinct milestones rather than a promised schedule. In particular, the first-decision figure is not a forecast of when an accepted article will appear.
Alternatives
AIP’s journal directory and materials portfolio identify several adjacent titles. The table compares their stated subject emphases, without predicting editorial outcomes. A manuscript’s central research question can help narrow the relevant scope pages to read.
| Journal | Publisher-described emphasis | Scope distinction to examine |
|---|---|---|
| AIP Advances | Research across the physical sciences, including materials and condensed matter physics | Broader physical-sciences coverage |
| APL Photonics | Fundamental, applied and multidisciplinary research centered on photonics | Light and photonics as the principal focus |
| APL Bioengineering | Research at the intersection of biology, physics and engineering | The biological and engineering interface |
The directory lists all three as open access titles. Their individual policies still govern article type, evidence and submission requirements. A shared publisher or overlapping material system does not establish that the same manuscript meets every journal’s criteria.
Common mistakes and a manuscript check
Illustrative manuscript check: consider a hypothetical experimental thin-film study that includes supporting calculations. Its authors could map the material and measured properties to the scope, then check whether the evidence supports a significant original finding. They would select an Article, prepare the manuscript and supplement, agree the author contributions and describe the location of the underlying data. This is an example of applying the published requirements, not a prediction of acceptance.
Three avoidable errors follow from the policies: importing the Applied Physics Letters length limit into APL Materials; treating a Special Topic as an exemption from review; and using a data availability statement that describes a repository or access route the authors have not actually arranged. Each is caught by checking the named journal’s instructions against the actual manuscript package.
The downloadable data table below brings together identity, access and author requirements from the separate publisher pages. It provides a compact record of what to check and the source behind each entry.
Sources
- AIP Publishing: APL Materials journal home. Checked 2026-11-14.
- APL Materials: Overview, scope and journal metrics. Checked 2026-11-14.
- APL Materials: Editorial Policies. Checked 2026-11-14.
- APL Materials: Publication Charges and Open Access Fees. Checked 2026-11-14.
- AIP Publishing: Author Instructions, including APL Materials. Checked 2026-11-14.
- AIP Publishing: Find the Right Journal. Checked 2026-11-14.
- AIP Publishing: Materials Science Portfolio. Checked 2026-11-14.
- AIP Publishing: Ethics for Authors. Checked 2026-11-14.
- AIP Publishing: Research Data Policy. Checked 2026-11-14.
Data: APL Materials publication and manuscript checklist
An original crosswalk compiled from APL Materials journal policies and AIP Publishing author, ethics and data instructions. Each row connects a journal fact or manuscript obligation to the publisher page that states it.
Period covered: 2026-11-14.
| Item | Publisher requirement or fact | Primary source URL |
|---|---|---|
| Journal identifier | Online ISSN 2166-532X | https://pubs.aip.org/aip/apm/pages/about |
| Theory and computation | Experimental data or findings must also be reported. | https://pubs.aip.org/aip/apm/pages/about |
| Research articles | Original significant findings with sufficient experimental information for reproduction. | https://pubs.aip.org/aip/apm/pages/policies |
| Special Topic submissions | Subject to the usual journal review process; accepted papers appear in regular issues and a virtual collection. | https://pubs.aip.org/aip/apm/pages/policies |
| License and copyright | CC BY 4.0 license; authors retain copyright. | https://pubs.aip.org/aip/apm/pages/charges |
| Article length | No overall article length restriction; the APM instructions provide article-type guidance. | https://publishing.aip.org/resources/researchers/author-instructions/ |
| Initial files | Single compiled manuscript PDF; supplementary material in a separate PDF when present. | https://publishing.aip.org/resources/researchers/author-instructions/ |
| Author contributions | CRediT statement required; corresponding author ensures authors have agreed their contributions. | https://publishing.aip.org/resources/researchers/author-instructions/ |
| Authorship | CRediT role descriptions do not change the criteria for authorship. | https://publishing.aip.org/resources/researchers/policies-and-ethics/authors/ |
| Data availability | A statement tells readers where to request or access the underlying data; linked datasets also need reference-list citations. | https://publishing.aip.org/resources/researchers/open-science/research-data-policy/ |
Sources
- APL Materials: Overview (accessed 2026-11-14)
- APL Materials: Editorial Policies (accessed 2026-11-14)
- APL Materials: Publication Charges (accessed 2026-11-14)
- AIP Publishing: Author Instructions (accessed 2026-11-14)
- AIP Publishing: Ethics for Authors (accessed 2026-11-14)
- AIP Publishing: Research Data Policy (accessed 2026-11-14)
Compiled by CASRAI from the sources above. Free to reuse under CC BY 4.0 with attribution.







