Skip to main content
v2026.11,986 entries · CC-BY 4.0
LAC HealthSponsored

Shop astral 150 supplies

  • FDA registered
  • ISO 13485
  • BBB Accredited A+

Shop at LAC Health

Astral 150 Ventilator: Modes, Specs and Guide

The Astral 150 is a portable life-support ventilator. Explore its dual-limb circuitry, ventilation modes, battery runtimes, and Vyaire LTV 1200 comparison.

Written and maintained by CASRAI Editorial Board

Published

This page describes products and general use; it is not medical advice.

On this page

Short answer

The ResMed Astral 150 is a portable Class II life-support mechanical ventilator indicated for adult and pediatric patients weighing more than 5 kg. Weighing 3.2 kg, it delivers invasive and non-invasive ventilation across single-limb, double-limb, and mouthpiece circuits. It features an integrated FiO2 sensor, up to 24-hour battery runtimes, and volume and pressure modes including iVAPS.

Definition and scope

The Astral 150 is a multi-mode, turbine-driven mechanical ventilator engineered for continuous or intermittent positive pressure ventilation. Regulated by the U.S. Food and Drug Administration (FDA) under 21 CFR 868.5895 as a Class II medical device (Product Code CBQ, 510(k) K133868, ResMed Ltd.), it is cleared for hospitals, transport, and homecare.

The device is cleared for adult and pediatric patients weighing greater than 5 kg (11 lbs). When utilizing intelligent Volume-Assured Pressure Support (iVAPS), the indicated threshold is 30 kg (66 lbs).

Unlike nocturnal positive airway pressure machines for sleep apnea (discussed in our guide to cleaning and filter maintenance), the Astral 150 is a life-support system with redundant alarms and internal battery backup. It operates alongside institutional respiratory therapy equipment during step-down care and long-term ventilation.

How it works or how it is used in practice

The Astral 150 integrates micro-turbine air delivery, modular circuit options, low-pressure oxygen blending, and adaptive pressure titration.

Pneumatic drive and micro-turbine generation

An internal rotary micro-turbine draws ambient room air through an acoustic muffler and particulate filter, generating inspiratory pressures between 2 and 50 cmH2O without external compressed air. Positive end-expiratory pressure (PEEP) is adjustable from 0 to 20 cmH2O on valve circuits and 3 to 20 cmH2O on vented leak circuits.

Modular circuit configurations

The ventilator supports four circuit setups:

  • Single-limb leak: Vented mask or interface with continuous leak exhaust.
  • Single-limb valve: Active pneumatic exhalation valve directing expired air away from the circuit.
  • Double-limb: Uses inspiratory and expiratory limbs returning gas to an internal flow sensor to measure exhaled tidal volume ($V_e$) and allow closed-circuit viral filtration.
  • Mouthpiece ventilation (MPV): Supports open-circuit breathing for neuromuscular patients with customized disconnect alarms.

Oxygen blending and built-in FiO2 monitoring

A rear low-pressure port accepts oxygen bleed-in up to 30 L/min (<= 50 kPa / 7.25 psi). An internal electrochemical fuel cell continuously monitors delivered oxygen between 21% and 100% FiO2, displaying live levels and triggering alarm thresholds. Clinicians pair this with pulse oximeter types to monitor patient saturation.

Ventilation modes and power architecture

Modes include CPAP, PAC, PCV, PSV, VCV, SIMV, and iVAPS with AutoEPAP. Delivered tidal volume ranges from 100 to 2,500 mL in adults and 50 to 300 mL in pediatrics. The internal lithium-ion battery provides ~8 hours of nominal runtime, expandable up to 24 hours via two external batteries, supporting transport battery power and runtime planning.

The Astral 150 sits within portable life-support mechanical ventilators, providing advanced monitoring over the Astral 100 and a lighter alternative to legacy institutional units such as the Vyaire LTV 1200.

Astral 150 vs. Astral 100

The Astral 100 is restricted to single-limb circuits and lacks integrated oxygen monitoring. The Astral 150 adds double-limb circuit hardware capability and an internal FiO2 sensor cell for continuous oxygen tracking.

Comparative specification benchmark: Astral 150 vs. Vyaire LTV 1200

The table below compares the Astral 150 with the Vyaire LTV 1200, sourced from FDA 510(k) records and manufacturer technical manuals:

Specification Parameter ResMed Astral 150 Vyaire LTV 1200
Manufacturer ResMed Ltd. Vyaire Medical / Pulmonetic Systems
FDA 510(k) Clearance K133868 (21 CFR 868.5895) K060647 (21 CFR 868.5895)
FDA Product Code CBQ (Facility and Home Use) CBK (Continuous Ventilator, Facility)
Physical Weight 3.2 kg (7.1 lbs) 6.5 kg (14.5 lbs)
Circuit Types Single-limb leak/valve, double-limb, mouthpiece Single-limb with active exhalation valve
Pneumatic Compressor Internal rotary micro-turbine Internal rotary turbine compressor
Oxygen Blending Low-pressure bleed-in (up to 30 L/min) + FiO2 cell High-pressure blender (40–80 PSIG) + bleed-in
Delivered Tidal Volume Adult: 100–2,500 mL; Pediatric: 50–300 mL Pediatric and Adult: 50–2,000 mL
Inspiratory Pressure 2 to 50 cmH2O 1 to 99 cmH2O (PC); 1 to 60 cmH2O (PS)
Breath Rate Range Adult: 2–50 bpm; Pediatric: 5–80 bpm 0 to 80 bpm
Internal Battery Runtime ~8 hours nominal ~1 hour emergency backup
External Battery Support Dual external batteries (up to 24 hours total) SprintPack lithium-ion system (~5 hours)

Where it matters for labs, clinics or supply decisions

Deploying portable ventilators influences equipment logistics, gas pipeline needs, and infection control.

Transport weight and clinical mobility

Weighing 3.2 kg, the Astral 150 is less than half the weight of 6.5 kg ventilators like the LTV 1200. This compact profile reduces mounting torque on wheelchairs and eases transfer during inter-facility transport.

Circuit stocking and aerosol containment

Inventory management must align circuit types with clinical isolation needs. Double-limb circuits allow HEPA viral/bacterial filtration on both inspiratory and expiratory limbs, capturing pathogens before release into clinical environments. Single-limb leak circuits require vented interfaces, such as those evaluated in our guide to types of oxygen face masks.

Gas infrastructure and maintenance

The Astral 150 requires no 50-PSI medical gas supply, operating directly from ambient air. Routine maintenance requires checking air inlet filters monthly, replacing intake foam every six months, performing annual battery capacity tests, and calibrating or replacing the electrochemical FiO2 cell per manufacturer protocol.

Common misunderstandings

  • Astral 150 and Astral 100 share the same circuits: Only the Astral 150 supports the double-limb adapter and expiratory flow measurements; the Astral 100 is single-limb only.
  • Oxygen bleed-in produces a fixed FiO2: Bleed-in oxygen mixes passively into turbine flow; delivered FiO2 fluctuates with tidal volume and respiratory rate, requiring the built-in sensor to confirm concentrations.
  • The device requires pressurized hospital air: The internal micro-turbine produces required inspiratory flows from room air without wall gas lines.
  • The internal battery alone provides 24 hours: The internal battery provides ~8 hours; 24-hour runtime requires two external batteries connected concurrently.

Frequently asked questions

What is the key difference between the Astral 100 and Astral 150?

The Astral 150 features an internal electrochemical FiO2 cell for real-time oxygen monitoring and supports a native double-limb circuit adapter module for exhaled volume measurement, neither of which is present on the Astral 100.

What patient weight range is the Astral 150 cleared for?

Under FDA 510(k) K133868, the device is cleared for adult and pediatric patients weighing more than 5 kg (11 lbs). Its proprietary iVAPS mode is indicated for patients weighing at least 30 kg (66 lbs).

How does the Astral 150 compare to the Vyaire LTV 1200?

The Astral 150 weighs 3.2 kg, supports double-limb circuits, features an integrated FiO2 sensor, and provides 8 hours of internal battery runtime. The Vyaire LTV 1200 weighs 6.5 kg, uses single-limb circuits, features an internal 40–80 PSIG oxygen blender, and provides 1 hour of internal backup power.

Does the Astral 150 require an external compressed air source?

No. The Astral 150 uses an internal rotary micro-turbine to draw in and compress ambient room air, operating independently of wall air or cylinder supplies.

How long does the Astral 150 battery run during patient transport?

The internal lithium-ion battery runs for approximately 8 hours under nominal test conditions. Adding two external batteries extends total transport operating time up to 24 hours.

Sources

Follow CASRAI

Research-administration guidance, standards updates and independent tool reviews.

Ask CASRAI · free to try

Ask about Astral 150 Ventilator: Modes, Specs and Guide

2 free questions a day, no account.

An AI assistant for research: funder rules, compliance, methods and publishing. It links the sources behind its answers and labels answers that come from a web search.

Answers draw on CASRAI's guides and dictionary plus the federal and funder documents we index: Federal Register, Grants.gov, Regulations.gov and UKRI.

Works on this site and inside Claude, Cursor and the AI tools you already use.

Everything CASRAI publishes — this page, the dictionary, the guides and the news — stays open to read, with no account and no card.

Referenced across the research world

University of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logoUniversity of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logo
  • University of Cambridge logo
  • Columbia University logo
  • Crossref logo
  • University of Edinburgh logo
  • Harvard University logo
  • University of Oxford logo
  • Princeton University logo
  • Stanford School of Medicine logo
  • University College London logo
  • ORCID logo

View CASRAI adoption →