Written and maintained by CASRAI Editorial Board
Published · Last updated
On this page
General product and regulatory information for clinic, lab and supply staff. It is not medical advice and does not describe how to remove a cast from a patient.
Short answer
A cast saw is a powered, hand-held instrument used to cut through a hardened cast. In US regulation it falls under “cast removal instrument, AC-powered” (21 CFR 888.5960, FDA product code LGH), a Class I device exempt from 510(k) premarket notification. A cast cutter is the same family, a cast spreader is a separate manual instrument, and a cast vacuum is a powered accessory named in the same regulation.
Definition and scope
21 CFR 888.5960 defines a cast removal instrument as “an AC-powered, hand-held device intended to remove a cast from a patient.” The regulation says this generic type includes the electric cast cutter and the cast vacuum. The regulation names the powered device an “electric cast cutter”, which is the instrument this page calls a cast saw.
Manual tools sit in a different regulation. 21 CFR 888.5980 defines a manual cast application and removal instrument as a nonpowered hand-held device used in applying or removing a cast, and lists the cast knife, cast spreader, plaster saw, plaster dispenser and casting stand. A “plaster saw” is therefore a manual instrument under this regulation, not a powered saw.
Cast saws are used on the casting materials covered elsewhere on this site, such as plaster bandage and cast tape, and in the same settings that stock a splint kit.
How a cast saw is used in practice
Cast removal is carried out by healthcare personnel. A published study of removal on life-sized pediatric arm models involved both experienced and inexperienced operators working on long-arm fiberglass casts, and it treats the cutting blade itself as the main hazard: the blade can touch skin and it can get hot. This page gives no step list; operating instructions come from the manufacturer’s instructions for use and the clinic’s own training.
Cast cutter, cast spreader and cast removal tools compared
The table below uses the wording of the two federal regulations and FDA’s product code database, checked 2026-10-30.
| Item | Powered or manual | Regulation | FDA product code | Named in the regulation as |
|---|---|---|---|---|
| Electric cast cutter (cast saw) | AC-powered, hand-held | 21 CFR 888.5960 | LGH | Example of a cast removal instrument |
| Cast vacuum | AC-powered | 21 CFR 888.5960 | LGH | Example of a cast removal instrument |
| Cast knife | Nonpowered, hand-held | 21 CFR 888.5980 | LGG | Example of a manual cast application and removal instrument |
| Cast spreader | Nonpowered, hand-held | 21 CFR 888.5980 | LGG | Example of a manual cast application and removal instrument |
| Plaster saw | Nonpowered, hand-held | 21 CFR 888.5980 | LGG | Example of a manual cast application and removal instrument |
Both regulations classify these devices as Class I (general controls) and exempt them from the premarket notification procedures in subpart E of part 807, subject to the limitations in 21 CFR 888.9. The manual group in 888.5980 is also exempt from the quality management system requirements of part 820 except records and complaint files under 820.35. The powered group in 888.5960 carries no such part 820 exemption in its text.
Cast saw parts
The regulations do not publish a parts list for a cast saw. They name the powered cutter and the vacuum as the two examples of powered cast removal instruments, so a listing that sells a cutter and a vacuum together is describing two items of the same regulation. For blades, guards and other components, the manufacturer’s documentation for the specific model is the source.
Where it matters for clinics, labs and supply decisions
Injury risk is the documented concern
A 2016 study in Clinical Orthopaedics and Related Research (Stork et al., PMC4887358) summarises prior reports: cast saw injuries occur in about 0.1% to 0.72% of cases; blade temperatures from 41 to 102 °C have been reported, with one study averaging 56 °C on fiberglass casts; and permanent dermal injury can occur above 50 °C. The authors tested a woven cast saw safety strip on life-sized pediatric arm models. Simulated skin touches fell from a mean of 9.0 to 0.1 for experienced users and from 8.5 to 0.6 for inexperienced users. These were models, not patients, so the result shows the strip’s effect in that setup and is not a measured injury rate in people.
A checklist drawn from the sources
- Know which regulation the item falls under. A powered cutter or cast vacuum is 888.5960 (LGH); a cast spreader, knife or plaster saw is 888.5980 (LGG).
- Read “FDA approved” on a listing carefully. The regulations classify these devices as Class I and exempt from 510(k), so they are not “cleared” through premarket notification under these classifications.
- Use the manufacturer’s instructions for use for blade, setup and maintenance questions; the federal text does not cover them.
- Be aware of the heat and skin-contact findings above when writing local training and equipment policies, and consult the manufacturer on accessories such as safety strips.
- Keep the manual group in view. Spreaders and knives are separate stock lines from the powered saw; see the sports medicine clinic supply checklist for how a clinic lists them, and what a splint is for the related immobilisation product.
Common misunderstandings
“A cast saw is a circular saw.”
The federal definition says only that it is an AC-powered, hand-held device intended to remove a cast. It does not specify a blade design, so do not infer one from the name.
“A cast cutter and a cast saw are different products.”
The regulation names the “electric cast cutter” as the example of the powered cast removal instrument.
“A cast spreader cuts the cast.”
A cast spreader is listed in 21 CFR 888.5980 among nonpowered hand-held devices for applying or removing a cast. The regulation does not describe it as a cutting device.
“It is FDA approved.”
Both regulations make the device Class I and exempt from premarket notification. That is a classification status, not an approval.
Frequently asked questions
What is a cast saw?
A powered, hand-held instrument for cutting a cast. FDA regulates it as a cast removal instrument, AC-powered, under 21 CFR 888.5960 (product code LGH).
What is a cast cutter?
“Electric cast cutter” is the name 21 CFR 888.5960 gives to the powered cast removal instrument, so it is the same family as a cast saw.
What is a cast spreader?
A nonpowered hand-held instrument listed in 21 CFR 888.5980 (product code LGG) with the cast knife and plaster saw.
What are cast removal tools?
Under FDA classification they split into powered instruments (888.5960: electric cast cutter, cast vacuum) and manual instruments (888.5980: cast knife, cast spreader, plaster saw, plaster dispenser, casting stand).
What are the parts of a cast saw?
No federal source lists them. Consult the instructions for use of the specific model; the regulation names the cutter and cast vacuum as the powered devices.
Sources
- 21 CFR 888.5960, Cast removal instrument (eCFR; checked 2026-10-30): https://www.ecfr.gov/current/title-21/section-888.5960
- 21 CFR 888.5980, Manual cast application and removal instrument (Cornell LII; checked 2026-10-30): https://www.law.cornell.edu/cfr/text/21/888.5980
- FDA Product Classification Database, product code LGH (checked 2026-10-30): https://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfpcd/classification.cfm?id=LGH
- Stork et al., “To Cast, to Saw, and Not to Injure: Can Safety Strips Decrease Cast Saw Injuries?”, Clin Orthop Relat Res 2016;474(7):1543-1552 (checked 2026-10-30): https://pmc.ncbi.nlm.nih.gov/articles/PMC4887358
- FDA Product Classification Database, product code LGG, manual cast application and removal instrument (checked 2026-10-30): https://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfpcd/classification.cfm?id=LGG







