Written and maintained by CASRAI Editorial Board
Published · Last updated
On this page
General product and regulatory information for clinic, lab and supply staff. It is not medical advice and does not describe how to apply or remove a cast.
Short answer
A medical cast is a rigid shell, usually fiberglass or plaster, that holds an injured body part in place, most often while a fracture heals. In the US, FDA’s cast component rule (21 CFR 888.5940) covers the accessories that protect or support a cast, and classifies them as Class I (general controls) devices that are generally exempt from premarket notification, subject to the limits in 21 CFR 888.9.
Definition and scope
Cleveland Clinic describes a cast as something that “firmly holds a part of your body in place” and immobilizes an injured area, most often while a fracture heals. People also search for this as “cast medical” or “medical casting”; in this guide the phrase means the finished support and the supplies that make it, not the sculpting or metal-casting senses of the word.
A cast is different from a splint. Where a splint is the right term, see what a splint is. For the tape and bandage forms of casting material, see cast tape and plaster bandage.
How a cast is built: the component map
A cast is a system of parts rather than a single product. The table maps each part to what a named source says and to the CASRAI page that covers it, so staff can find the right page for the item they are asking about.
| Part | What the sources say | Where to read more |
|---|---|---|
| Casting material (the shell) | Fiberglass or plaster; Cleveland Clinic says fiberglass is more common. | Cast tape, plaster bandage |
| Layer under the shell | Covered in the stockinette guide. | What is stockinette |
| Cast components: cast heel, toe cap, cast support, walking iron | FDA names these as examples of the generic type “cast component”, intended “to protect or support a cast”. | 21 CFR 888.5940 (see Sources) |
| Removal tool | Cleveland Clinic says a provider uses a special saw that is not sharp enough to injure skin. | Cast saw |
Fiberglass cast material and plaster at a glance
Cleveland Clinic says fiberglass is lighter, more durable and lets air through, while plaster molds more easily. In a University of Utah Health interview (2017), a clinician called fiberglass “significantly lighter, much cleaner” and plaster “heavy” and “dirty”, but said the molding results of the two in studies were “very similar”. That is one clinician’s opinion, not study data. The full side-by-side is in fiberglass cast vs plaster cast.
How FDA treats cast components
21 CFR 888.5940 defines a cast component as “a device intended for medical purposes to protect or support a cast” and lists the cast heel, toe cap, cast support and walking iron under that generic type. The classification is Class I (general controls). The device is exempt from premarket notification (510(k)) subject to 21 CFR 888.9, and exempt from the quality management system regulation except for records and complaint files under 21 CFR 820.35.
Two limits matter. First, 21 CFR 888.9 says the exemption applies only to the extent the device has the existing or reasonably foreseeable characteristics of commercially distributed devices of that type. A 510(k) is still required when a device is intended for a use different from a legally marketed device in that type, or uses a different fundamental scientific technology. Second, the text defines the term by purpose (“protect or support a cast”), and the rule’s own examples are accessories. This guide does not claim that the casting tape or bandage itself falls under the same entry.
Where it matters for clinics and supply decisions
Cast supplies are bought as separate items (casting material, under-layer, accessories, removal tool), and a listing called a “cast kit for broken bones” is a supplier’s bundle of such items; what a given kit contains is set by its labeling, not by a standard. A practical check, built from the sources above rather than from any buying rule:
- Identify which part each line item is (shell material, under-layer, accessory, removal tool) using the map above.
- For accessories such as a cast heel or walking iron, the regulatory category is “cast component”, Class I.
- Read the manufacturer’s labeling and instructions for use that come with each item; this guide does not replace them.
- Keep the removal tool (cast saw) in view as a separate item with its own page, since cast removal is done by a provider.
Common misunderstandings
| Belief | What the source says |
|---|---|
| A cast and a splint are the same thing. | They are separate products with separate pages; see splint. |
| Plaster is obsolete. | Cleveland Clinic describes both fiberglass and plaster as the two cast types and says plaster molds more easily. |
| A cast is removed with ordinary tools. | Cleveland Clinic says a provider removes a cast with a special saw that is not sharp enough to injure skin. |
| Fiberglass always gives a better mold. | A University of Utah Health clinician said molding results in studies were “very similar”. |
FAQ
What is a medical cast?
A rigid support, usually fiberglass or plaster, that holds an injured area in place, most often while a fracture heals (Cleveland Clinic, checked 2026-11-01).
What is a cast made of?
Fiberglass or plaster, with fiberglass more common according to Cleveland Clinic. See cast tape and plaster bandage.
What is a cast kit for broken bones?
A supplier’s bundle of cast supplies. What a given kit contains is set by its labeling, not by a standard; see the component map above.
What is the difference between a cast and a splint?
They are separate products with separate pages: see what a splint is.
How does FDA classify cast accessories?
As “cast component” devices: Class I (general controls), exempt from 510(k) subject to 21 CFR 888.9.
Who removes a cast?
A provider, using a special saw that is not sharp enough to injure skin (Cleveland Clinic).
Sources
- 21 CFR 888.5940, Cast component, eCFR: https://www.ecfr.gov/current/title-21/section-888.5940 (checked 2026-11-01).
- 21 CFR 888.9, Limitations of exemptions from section 510(k), eCFR: https://www.ecfr.gov/current/title-21/section-888.9 (checked 2026-11-01).
- Cleveland Clinic, Casts: https://my.clevelandclinic.org/health/treatments/25191-casts (checked 2026-11-01).
- University of Utah Health, Modern casts for broken bones (2017): https://healthcare.utah.edu/the-scope/list/2017/04/modern-casts-broken-bone (checked 2026-11-01).







