Written and maintained by CASRAI Editorial Board
Published · Last updated
On this page
Short answer: a “Class 4 indicator” is the older name for what the current standard ISO 11140-1:2014 calls a Type 4 chemical indicator: a multicritical-variable indicator that reacts to more than one sterilization parameter, such as time and temperature. It is a process check on a pack or load. It is not a sterility test and not a replacement for biological indicators. This page is general product and standards information, not medical advice.
Class 4 vs Type 4: the naming
Both labels circulate, and buyers meet both. The BSI/SAI Global catalogue entry for ISO 11140-1:2014 states that “the term class has been replaced by the term type so as not to infer any hierarchical significance.” The same entry says the 2005 terms “single variable” and “multi-variable” became “single critical process variable” and “multicritical process variable”. So a product sold as “Class 4” or “multi-variable” in older literature corresponds to a Type 4 or multicritical-variable indicator in the 2014 edition, which the catalogue lists as current (published 31-01-2015).
The CDC Guideline for Disinfection and Sterilization in Healthcare Facilities still uses the older wording: “Chemical indicators have been grouped into five classes based on their ability to monitor one or multiple sterilization parameters.” Expect to see “class” in CDC text and in many product listings, and “type” in current ISO-based documents.
Definition and scope
ISO 11140-1:2014 covers “general requirements and test methods for indicators that show exposure to sterilization processes.” Indicators are classified by intended use, by type, and by an optional prefix (e, s or i). The catalogue entry notes that Types 3, 4, 5 and 6 have “arguably the same intended use”, as an internal indicator to verify attainment of process parameters; Type 5 is the integrating indicator and Type 6 the emulating indicator. This page deals only with Type 4. For the full list of types, read the chemical indicators for sterilization guide rather than a repeat here; Type 5 has its own page at integrating indicator.
The CDC describes chemical indicators in general as “heat-or chemical-sensitive inks that change color when one or more sterilization parameters (e.g., steam-time, temperature, and/or saturated steam…) are present.” A Type 4 sits at the “more than one parameter” end of that description.
How a Type 4 indicator is used in practice
The CDC separates external and internal indicators. Chemical indicators affixed on the outside of a pack “show that the package has been processed through a sterilization cycle, but these indicators do not prove sterilization has been achieved.” The CDC also describes indicators placed on the inside of a pack as verifying sterilant penetration. On the result, the CDC states: “If the internal and/or external indicator suggests inadequate processing, the item should not be used.”
A manufacturer example shows how a Type 4 is described in product literature. The Solventum (3M) Attest VH2O2 Tri-Metric product page lists the product as “Type 4”, “compliant with ISO 11140-1:2014”, and says it “monitors 3 critical variables – exposure time, temperature and VH2O2 concentration” and “independently verifies that the stated values of exposure time, temperature and vaporized hydrogen peroxide concentration have been met.” It is described as an “internal pack monitor in vaporized hydrogen peroxide sterilizers”. The page gives no setpoints and refers readers to the instructions for use. This is cited only as an example of the pattern, not as a recommendation of any product.
Type 4 compared with neighbouring monitors
| Question | What the sources say |
|---|---|
| Is Type 4 “better” than Type 3? | Not by rank. ISO 11140-1:2014 dropped “class” specifically to avoid implying a hierarchy (BSI/SAI Global catalogue entry). |
| Does a Type 4 show a load is sterile? | No. Only biological indicators of resistant spores “can measure the microbial killing power”; chemical indicators “should be used in conjunction with biological indicators, but… should not replace them” (CDC). |
| How does it relate to the Bowie-Dick test? | The Bowie-Dick test is a separate air-removal test for dynamic-air-removal sterilizers (CDC). See helix test for a related air-removal check. |
| Is one Type 4 product usable in every sterilizer? | Product literature is process-specific: the example above is for vaporized hydrogen peroxide and lists its own critical variables. Check the manufacturer’s stated process. |
What to ask a supplier or check in the documents
This checklist is a documentation check, not a procedure.
- Which edition and wording. Does the product literature state compliance with ISO 11140-1 and which edition (2014 uses “Type”; older literature uses “Class”)?
- Which variables. Which critical variables does it monitor (for example exposure time, temperature, and in the Solventum example VH2O2 concentration), and what stated values does it verify?
- Which process. Is it written for steam or for another sterilization process? The example product is specific to vaporized hydrogen peroxide sterilizers.
- Where it goes. Is it intended as an internal pack monitor, an external process indicator, or both?
- Instructions for use. Does the IFU give the stated values and the reading criteria? The example page defers to its IFU rather than listing setpoints.
- What happens on a failed result. Facility policy should follow the CDC position that an item is not used when an indicator suggests inadequate processing.
For the wider validation picture, see autoclave validation with biological and chemical indicators and the general sterilization validation guide.
Common misunderstandings
- “Class 4 is a higher grade than Class 3.” The standard removed “class” so as not to imply rank.
- “A colour change means the item is sterile.” The CDC says indicators do not prove sterilization; biological indicators measure killing power.
- “Class 4 and Type 4 are different products.” They are the older and current labels of the same category, per the ISO 11140-1:2014 catalogue entry.
- “One chemical indicator covers every cycle.” Product literature names its process and variables; match them to the sterilizer in use.
FAQ
Is a Class 4 indicator the same as a Type 4 indicator?
In terms of the category, yes. ISO 11140-1:2014 replaced “class” with “type” to avoid implying a hierarchy, and “multi-variable” became “multicritical process variable”. Older documents and some product listings still say Class 4.
What does a Class 4 or Type 4 indicator monitor?
More than one critical sterilization variable. In the manufacturer example above, those are exposure time, temperature and VH2O2 concentration for a vaporized hydrogen peroxide process. Variables differ by product and process.
Does a Type 4 indicator replace a biological indicator?
No. The CDC says chemical indicators should be used with biological indicators and should not replace them, because only spore-based biological indicators measure microbial killing power.
Is a Type 4 indicator an internal or an external indicator?
The CDC describes internal indicators as verifying sterilant penetration. Whether a specific Type 4 product is intended as an internal pack monitor is stated in the manufacturer’s literature; the Solventum example is described as an internal pack monitor.
Why do some documents say Class 4 and others Type 4?
The 2005 edition of ISO 11140-1 used “class”; the 2014 edition replaced it with “type”. The CDC guideline still groups chemical indicators into “classes”, and many product listings follow the older wording.
Sources
All sources below were checked on 2026-11-01.
- BSI / SAI Global, BS EN ISO 11140-1:2014 catalogue entry: https://shop.standards.ie/en-ie/standards/bs-en-iso-11140-1-2014-201341_saig_bsi_bsi_478857
- CDC, Guideline for Disinfection and Sterilization in Healthcare Facilities, sterilization monitoring section: https://www.cdc.gov/infection-control/media/pdfs/Guideline-Disinfection-H.pdf
- Solventum (3M) Attest VH2O2 Tri-Metric product page, Type 4 example: https://www.solventum.com/en-ca/home/v/v101198009/







