Skip to main content
v2026.11,986 entries · CC-BY 4.0
LAC HealthSponsored

Shop dental etchant supplies

  • FDA registered
  • ISO 13485
  • BBB Accredited A+

Shop at LAC Health

Dental Etchant: What It Is and Its FDA Product Code

Dental etchant explained: its FDA product code DYH, how it differs from a bonding agent, and which bonding systems use no separate etch step.

Written and maintained by CASRAI Editorial Board

Published · Last updated

On this page

General product and regulatory information only. This page is not medical or dental advice and does not describe clinical procedures.

Short answer

A dental etchant is a conditioning product applied to tooth surfaces before bonding so that an adhesive or resin can attach. FDA has no device category named “etchant”: products sold as etching gels or tooth conditioners are listed under product code DYH, “Adhesive, Bracket And Tooth Conditioner, Resin” (Class II, Dental panel, 21 CFR 872.3750). A separate etchant is only part of etch-and-rinse and selective-etch strategies, not of self-etch systems.

Definition and scope

“Etchant” is a trade and clinical term, not a regulatory one. In FDA’s records the nearest device group is the one defined in 21 CFR 872.3750, titled “Bracket adhesive resin and tooth conditioner.” Paragraph (a) describes the device as “an adhesive compound, such as polymethylmethacrylate, intended to cement an orthodontic bracket to a tooth surface,” and paragraph (b) makes it Class II.

Two points follow from the way the regulation is written. First, the written definition centres on orthodontic bracket adhesive, while the product code name pairs “bracket” adhesive with “tooth conditioner.” Second, an etchant is a conditioning step that precedes a bonding material; it is not itself the bonding material. For the bonding material see dental bonding agent, which sits under a different FDA product code (KLE).

How it fits into bonding strategies

Dental adhesive systems are commonly grouped by how they treat the tooth surface. In etch-and-rinse systems, a conditioning agent is applied first as a distinct step, and the adhesive follows. In selective-etch approaches, the conditioner is used on part of the surface. Self-etch systems build conditioning into the adhesive, so no separate etchant is used. The 510(k) record for the Ormco EtchFree Bonding System (K250015, decision 2025-01-03) is an example of a product described as having no separate etch step.

A 2026 narrative review in Bioengineering (Rathke, Schnutenhaus and Seemann) describes the shift from multi-step adhesives to simplified and universal adhesives and on to self-adhesive composites. It reports that acidic functional monomers such as 10-MDP are becoming standard for a chemical bond to dentin hydroxyapatite rather than relying solely on micromechanical retention. It is a non-systematic review, and two of its authors are employees of Dentsply Sirona, so it describes the direction of the field and is not a head-to-head trial.

Related restorative materials that depend on a bonded surface include dental composite resin, bulk-fill composite and pit-and-fissure sealant; glass ionomer cement is a different material class with its own chemistry.

FDA classification and product code DYH

The openFDA classification record for product code DYH (data last updated 2026-10-19) reads: device name “Adhesive, Bracket And Tooth Conditioner, Resin”; review panel Dental; device class 2; regulation number 872.3750; third-party review eligible; not exempt from good manufacturing practice requirements.

The openFDA 510(k) database lists these examples of clearances under DYH. They illustrate how etching products appear in the record and are not recommendations.

510(k) Name as listed Applicant Decision date
K871591 Ormco Gel-Etch Scientific Pharmaceuticals 1987-05-18
K910803 Enamel Etching Gel Gresco Products 1991-03-15
K150128 GC Ortho Connect, GC Ortho Etching Gel GC Orthodontics America 2015-07-16
K214054 TP Orthodontics Light-Cure Adhesive System with etchant TP Orthodontics 2022-10-14
K250015 Ormco EtchFree Bonding System (no separate etch step) Ormco 2025-01-03

The AccessGUDID device database (openFDA UDI endpoint) also carries entries such as “Lightbond Gel Etch 5ml” from ADITEK DO BRASIL under the same product code.

Where it matters for labs, clinics and supply decisions

A record-matching checklist based on the FDA records below:

  • Search by product code as well as by name. Etching gels appear in FDA records under DYH, not under a device name containing “etchant.” Searching only the trade term can miss the record.
  • Check which product group the item belongs to. Tooth conditioner (DYH, 21 CFR 872.3750) and bonding agent (KLE, 21 CFR 872.3200) are different FDA records, so an etchant is not interchangeable with a bonding agent on paper or in the clinic.
  • Look at the system, not only the component. Some cleared products bundle conditioner and adhesive (K214054), while others state there is no separate etch step (K250015).
  • Use the manufacturer’s instructions for use. Each product’s labelling is the authority on how it is supplied and handled; this page does not reproduce it.

Common misunderstandings

“Etchant” is an FDA device name

It is not. The FDA product name is “Adhesive, Bracket And Tooth Conditioner, Resin,” and the regulation covers bracket adhesive resin and tooth conditioner together.

Every bonding system needs a separate etchant

Not so. Self-etch systems include conditioning in the adhesive, and cleared systems such as K250015 are described as having no separate etch step.

An etchant is an adhesive

The two are different roles. The etchant prepares the surface; the adhesive creates the bond, and bonding agents are regulated under their own code (KLE).

Frequently asked questions

What is a dental etchant?

It is a conditioning product used before a bonding material, so that the adhesive or resin can attach to the tooth surface. It is not itself the bonding material.

What FDA product code covers dental etching gels?

Etching gels and tooth conditioners appear under product code DYH, “Adhesive, Bracket And Tooth Conditioner, Resin” (Class II, Dental panel, 21 CFR 872.3750).

Is a dental etchant the same as a bonding agent?

No. Bonding agents are listed under their own product code, KLE (“Agent, Tooth Bonding, Resin”, 21 CFR 872.3200).

Does every bonding system use a separate etchant?

No. Self-etch systems build conditioning into the adhesive, and the cleared Ormco EtchFree Bonding System (K250015) is described as having no separate etch step.

Sources

Follow CASRAI

Research-administration guidance, standards updates and independent tool reviews.

Ask CASRAI · free to try

Ask about Dental Etchant: What It Is and Its FDA Product Code

2 free questions a day, no account.

An AI assistant for research: funder rules, compliance, methods and publishing. It links the sources behind its answers and labels answers that come from a web search.

Answers draw on CASRAI's guides and dictionary plus the federal and funder documents we index: Federal Register, Grants.gov, Regulations.gov and UKRI.

Works on this site and inside Claude, Cursor and the AI tools you already use.

Everything CASRAI publishes — this page, the dictionary, the guides and the news — stays open to read, with no account and no card.

Referenced across the research world

University of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logoUniversity of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logo
  • University of Cambridge logo
  • Columbia University logo
  • Crossref logo
  • University of Edinburgh logo
  • Harvard University logo
  • University of Oxford logo
  • Princeton University logo
  • Stanford School of Medicine logo
  • University College London logo
  • ORCID logo

View CASRAI adoption →