Written and maintained by CASRAI Editorial Board
Published
On this page
Yes, Overleaf autosaves your project every few seconds as you type, according to its Getting started FAQ. Saving your source, compiling a PDF and keeping a recoverable manuscript version are separate tasks: use History for versions and download source files and PDFs separately when you need a local copy.
What it is used for in research
For a researcher drafting a LaTeX manuscript, the useful distinction is between the working text and the document delivered to someone else. Overleaf’s automatic saving maintains the project while you edit. A compiled PDF is an output made from the source files. A labeled version identifies a particular point in the project’s history. None of those descriptions means that a matching source archive and PDF have already been downloaded to your computer.
This guide follows one task: keeping track of what you wrote and preserving the version you intend to circulate. For the platform’s wider purpose and basic terminology, see the introduction to Overleaf. For permissions, co-author editing and review arrangements, use the Overleaf team workflow guide.
The data table below maps the different saving and output operations to their artifacts and limits. Read it as a way to identify which operation answers your immediate problem, rather than treating every file or history entry as an interchangeable backup.
Install or access
Overleaf’s Getting started FAQ says that writing projects requires an account. After signing in, projects you create or upload are saved in that account. The editor is available without a local software installation, including through the free plan. If you have several projects, return to My Projects to find the one you want; the FAQ describes the navigation control at the top left.
Automatic saving is described as occurring every few seconds while you type. That wording is an approximate cadence, not a promise of one precise interval. Use the separate history and export operations below when the task is to identify or retain a particular manuscript state.
Before a manuscript handoff, identify the actual project you are editing. One useful team convention is to record its recognizable name alongside the version label used for that handoff. This makes the handoff easier to distinguish from a similarly named copy or a later revision.
Step-by-step task: preserve a manuscript version
Use the following sequence when you want an identifiable version plus a local source copy and a readable PDF. The interface labels come from Overleaf’s History and downloading documentation.
- Finish the intended edits in the project. If the editor reports that you are offline, resolve the synchronization issue described below before treating the handoff as complete.
- Select History above the preview pane, then All history. Find the version you want to identify.
- Open that version’s three-dot menu and select Label this version. Enter a meaningful label and select Add label.
- For a source archive of that particular historical version, use its three-dot menu and select Download this version.
- To export the current project instead, return with Back to editor, then choose File, Download, Download as source (.zip).
- Compile the intended current source and download its PDF separately through File, Download, Download as PDF, or the Download PDF icon beside Recompile.
Keep the distinction in steps four and five: a historical-version download and a current-project download can represent different states. Downloading a source ZIP does not include the typeset PDF. For a handoff, check the contents and the visible PDF before sending them together.
Illustrative manuscript handoff
In this illustrative example, a corresponding author wants to circulate the Methods revision agreed with a collaborator. A label such as “Methods revision for co-author review” is more informative than “latest.” The author uses the intended current source, compiles it, checks the revised passage in the PDF and exports both outputs.
The check is about matching artifacts: does the source archive contain the revision the author intends to share, and does the PDF display it? A filename alone cannot answer that question. If further edits arrive during the handoff, pause and decide which state is being circulated rather than assuming two downloads made at different moments must match.
Output and how to read it
Saved source and compiled PDF
Recompile runs the LaTeX compilation process to generate a PDF from project files such as the TeX source, bibliography and images. The dropdown under that button controls Auto compile, which can automatically compile every few seconds. It is a separate feature from the autosave described in the FAQ.
If the PDF does not show an edit, investigate compilation rather than immediately concluding the source was lost. Overleaf reports compilation errors in its logs. It recommends Stop on first error when errors or timeouts occur, so the first problem is reported directly. See the guide to compiling LaTeX for the broader build workflow.
Also check the compile mode before interpreting missing images. Fast [draft] skips image processing and substitutes empty boxes. That is an output-mode choice, not evidence that the image files were deleted.
History and downloaded files
History provides an earlier-state view; an exported ZIP provides project source files. Overleaf’s free-plan history view includes edits from the previous 24 hours and labeled versions. Access to full project history depends on the project owner’s premium subscription. A copied project starts a fresh history rather than carrying the original history with it.
For journal handoffs, remember that generated compilation files are a separate category again. Overleaf documents retrieving a bibliography output through Logs and output files, Other logs and output files, then output.bbl. Use that route when the submission requires the generated bibliography; do not assume the ordinary source export contains every compilation artifact.
Troubleshooting
Offline editing and unsynced changes
Overleaf’s current offline documentation describes limited editing of the current file after the You’re offline banner appears: up to two minutes on the free plan or ten minutes on premium plans. The Editing paused banner then locks editing. Offline work does not include switching files, compiling or adding comments.
Reconnection usually synchronizes the changes automatically. If a collaborator’s edits create a conflict, Overleaf can instead offer a preview and the choice to save the offline changes as a new file or discard them. Read that choice carefully; discarding changes is different from reconciling them.
The vendor also documents copying the editor content or using Download file for a backup. After an accidental tab closure or browser crash, restoring the original tab may recover browser-backed offline work. Simply opening the project again is not the same operation. This recovery is not available for private or incognito tabs, so do not rely on private browsing for offline drafting.
Blank viewer, connection failures and loading problems
Preserve unsynced text before trying browser-reset diagnostics. This ordering combines the offline backup instructions with Overleaf’s loading-problem checklist; it avoids confusing a display investigation with recovery of text that has not synchronized.
For a loading or display problem, Overleaf lists browser state, extensions and network configuration among possible causes. Its checks include updating the browser, temporarily disabling extensions, trying another device or network, and checking access to compiles.overleafusercontent.com, which serves PDF and log downloads. A blank PDF can also be investigated by switching from the Overleaf PDF viewer to the browser PDF viewer.
The general checklist includes refreshing, clearing cookies and testing a private window. Apply those suggestions after protecting offline edits, taking account of the private-tab recovery limitation above. If an extension test resolves the problem, re-enable extensions individually to identify the interference.
If the problem persists, use Contact Us in the affected project’s menu. Overleaf asks for the operating system and browser versions, whether one or all projects are affected, visible errors and the troubleshooting already attempted. Those details help distinguish an editor connection problem from a PDF-only failure.
Free alternatives
For extended work without an internet connection, Overleaf documents downloading project files and editing them locally. The two editors below provide different local saving workflows. The comparison concerns saving source files, not a claim that either automatically synchronizes with your Overleaf account.
| Alternative | Documented saving workflow | Boundary to understand |
|---|---|---|
| TeXstudio, an open-source LaTeX editor | The getting-started guide saves the document through the save button or Ctrl+S. | The LaTeX system must be installed separately; the editor alone does not supply it. |
| Visual Studio Code, free for private or commercial use | Explicit saving is the default. File → Auto Save enables saving after a delay; settings also support saving when focus or the window changes. | These operations save local files. They do not constitute an Overleaf upload. |
TeXstudio’s introductory workflow also separates saving from compiling and viewing: F6 compiles through the installed LaTeX system, while F7 displays the PDF. This is the same practical distinction to keep in mind when leaving a cloud editor: writing a file to disk and building the typeset document are different operations.
In VS Code, check files.autoSave and files.autoSaveDelay if you need control beyond the menu toggle. Its documentation distinguishes unsaved edits, indicated in the editor tab, from files written to disk. Configure the behavior deliberately instead of transferring an assumption from Overleaf.
Overleaf’s offline guide warns that copying or uploading locally edited source can lose tracked changes or comments. Consider those review records before replacing files. For wider collaboration choices, see the comparison of Overleaf alternatives.
Sources
- Overleaf, Getting started FAQ. Checked 2026-11-16.
- Overleaf, History and versioning. Checked 2026-11-16.
- Overleaf, Downloading a project. Checked 2026-11-16.
- Overleaf, Recompiling your project. Checked 2026-11-16.
- Overleaf, Working offline. Checked 2026-11-16.
- Overleaf, Resolving PDF rendering and project loading problems. Checked 2026-11-16.
- TeXstudio, Project website and Getting started. Checked 2026-11-16.
- Microsoft, Basic editing and Visual Studio Code FAQ. Checked 2026-11-16.
Data: Overleaf saving, versioning and export operations
An original crosswalk of the artifacts and limits of five Overleaf operations, compiled from its saving FAQ, history, export, compilation and offline documentation. Each row identifies its official source; these are documented behaviors, not measured reliability results.
| Operation | Artifact or state | Documented boundary | Source URL |
|---|---|---|---|
| Automatic saving | Working project source | Occurs every few seconds as you type; offline copies and version labels are separate tasks. | https://docs.overleaf.com/getting-started/creating-an-account/getting-started-faq |
| Labeled version | Identified project-history state | Free history includes the last 24 hours and labeled versions; full history depends on the project owner’s premium access. | https://docs.overleaf.com/writing-and-editing/history-and-versioning |
| Current source export | Source files in a ZIP | File → Download → Download as source (.zip); the typeset PDF is not included. | https://docs.overleaf.com/managing-projects-and-files/downloading-a-project |
| Compilation | PDF generated from project source | Recompile builds the PDF; Auto compile is a separate option. | https://docs.overleaf.com/getting-started/recompiling-your-project |
| Temporary offline editing | Edits awaiting reconnection | Current-file editing is limited to 2 minutes free or 10 minutes premium; conflicts can prevent automatic synchronization. | https://docs.overleaf.com/writing-and-editing/working-offline |
Sources
- Overleaf: Getting started FAQ (accessed 2026-11-16)
- Overleaf: History and versioning (accessed 2026-11-16)
- Overleaf: Downloading a project (accessed 2026-11-16)
- Overleaf: Recompiling your project (accessed 2026-11-16)
- Overleaf: Working offline (accessed 2026-11-16)
Compiled by CASRAI from the sources above. Free to reuse under CC BY 4.0 with attribution.







