Skip to main content
v2026.11,986 entries · CC-BY 4.0

Overleaf Report Template: Setup and PDF Checks

Choose an Overleaf report layout, adapt its files and bibliography, inspect the compiled PDF, and keep the source ZIP with your report.

Written and maintained by CASRAI Editorial Board

Published

On this page

An Overleaf report template is a ready-made LaTeX project that supplies a report’s layout and starting structure. Open one from Overleaf’s Reports gallery, create your own copy, replace the example content and recompile. Before adapting it, check whether its main file uses sections or chapters, which supporting files it needs, and whether the PDF contains unresolved errors.

What Overleaf is used for in research

Overleaf provides a LaTeX editor and server-side compilation for preparing documents in a browser. Its Reports gallery specifically includes templates for experiments, research projects and lab reports. A template gives you an existing document structure to adapt; your research content supplies the argument, evidence and conclusions.

The important distinction is between a report as a document and report as a LaTeX class. A template can produce a report while using the article class: both Jenna Iori’s Paper template and Mihdí Caballero’s Simple report do so. Overleaf’s sectioning documentation also demonstrates the report class, which supports chapters. The template’s name alone therefore does not tell you its section hierarchy.

LaTeX separates content from document styling, as Overleaf’s introductory tutorial explains. For a recurring project report, this lets you retain the layout while replacing the text. Start by identifying the class and existing section commands; CASRAI’s guide to LaTeX document structure explains the underlying file anatomy in more detail.

How to install or access Overleaf

Access Overleaf through its official website. Its documentation states that compilation runs on its servers, so the browser workflow requires no local LaTeX installation. The Code Editor exposes the LaTeX source; the Visual Editor offers a rich-text interface. Use Code Editor when following the command examples here.

There are two documented starting routes. For an existing design, the project dashboard’s New Project menu leads to document types under Templates. Open a template’s details and select Open as Template to edit your own copy. Alternatively, choose New Project, then Blank project, enter a project name and select Create.

The blank-project route is useful for the illustrative example below. The gallery route is useful when you want to retain a supplied layout. Keep these workflows separate: replacing a supplied template’s whole main file with a minimal example discards that template’s design.

How to use an Overleaf report template step by step

Choose among Overleaf report templates

Begin with the Overleaf Reports gallery and inspect a template’s description and source. For example, Paper template places its research sections in the displayed main file. Simple report instead loads settings and section files with \input. These are different project structures, even though both use article.

As a practical starting check, locate the title information, section commands and bibliography instructions before changing the layout. In a supplied template, edit the example text where those commands already put it. A cover page or attractive preview does not establish that a design meets your institution’s reporting requirements; compare the actual requirements with the template you intend to use.

  1. Create the project copy. Open the chosen template and select Open as Template. Compile the starting project before editing. This establishes a visible baseline against which to compare your changes.
  2. Identify the main document. Follow File → Settings → Compiler → Main document and select the intended root .tex file. Overleaf recommends keeping this file at the project’s top level. It must contain a \documentclass declaration.
  3. Replace document metadata. Locate the title, author and date commands, or the template’s own equivalents. In a standard example, \title{...}, \author{...} and \date{...} supply metadata, while \maketitle produces the title in the document body. Replace sample identities rather than leaving them in the finished PDF.
  4. Replace the report sections. Retain the template’s existing hierarchy while entering your material. Overleaf’s sectioning guide demonstrates \chapter for a report-class document and \section within it. Do not assume that a command used in one class belongs in another.
  5. Follow supporting-file references. When the main file uses \input{sections/results}, edit the referenced section file. Overleaf’s large-project guide says these inserted files should omit the document preamble and document-opening and closing commands. Keep a single outer document around the assembled content.
  6. Keep the bibliography workflow coherent. If the template uses biblatex, its documented sequence includes loading the package, naming the database with \addbibresource{references.bib}, citing an entry with \cite{key}, and printing cited references with \printbibliography. Follow the workflow already present; CASRAI’s Overleaf citations and bibliography guide covers that task separately.
  7. Recompile after each meaningful change. Select Recompile and examine both the PDF and error messages. The compilation documentation recommends frequent compiling and prompt error correction. Adding one section before changing the next makes it easier to associate a new problem with a recent edit.

A minimal chapter-based report example

This illustrative example is an original starting structure, not an institutional template or a required research-report format. In a blank project, use it as the main document. Its commands follow Overleaf’s introductory and sectioning documentation; replace the bracketed prompts with your own material.

\documentclass{report}
\title{Research Project Report}
\author{[Author name]}
\date{[Report date]}

\begin{document}
\maketitle
\tableofcontents

\chapter{Introduction}
[State the research question and context.]

\chapter{Methods}
[Describe the work being reported.]
\section{Materials and data}
[Identify the materials or data used.]

\chapter{Results}
[Present the findings.]

\chapter{Discussion}
[Interpret the findings and their limitations.]

\chapter{Conclusion}
[State the report's conclusions.]
\end{document}

The example deliberately contains no image paths or bibliography database, so it has no supporting files for you to supply. It demonstrates document structure rather than a complete submission package. Add your required references and figures using the chosen template’s conventions before treating the report as finished.

When the report grows, Overleaf documents two ways to insert separate files: \input inserts their content without starting a new page, while \include starts a new page. For example, move the Results chapter and its text into sections/results.tex, then put \input{sections/results} where that chapter appeared. Do not duplicate the chapter in both places. The data table below combines the documented roles of main, section and bibliography files.

For a bibliography check, follow one real citation from its key in the text to its record in the database and then to the formatted reference list. Overleaf’s biblatex guide explains that the bibliography style determines which record fields appear. It also notes that \printbibliography defaults to the heading References in an article-class document and Bibliography in a report-class document. A different heading after changing the class can therefore be expected behaviour rather than missing data. Compare citation content as well as appearance.

How to read the output

The output is a typeset PDF assembled from the project source. Check the visible report alongside its compilation messages: Overleaf’s default error-handling mode can attempt to produce a PDF even when errors remain. A PDF preview alone is therefore an incomplete acceptance check.

For the illustrative example, confirm that the title reflects your edits and that Introduction, Methods, Results, Discussion and Conclusion appear as chapters. Materials and data belongs beneath Methods as a section. This is a structural check of this example, not a universal list of sections every report needs. Inspect the contents page against the headings actually present.

Overleaf documents that starred headings, such as \section*{Acknowledgements}, are unnumbered and do not automatically enter the table of contents. If a heading seems to be missing there, inspect its command before manually typing a contents entry. The sectioning documentation explains \addcontentsline when an unnumbered entry is intentional.

Export the two deliverables separately. Under File, the Download options include Download as PDF and Download as source (.zip). Overleaf explicitly says the source ZIP excludes the final PDF. For a report handover, keeping both preserves the readable output and the editable project; check which files your recipient actually requests.

Troubleshooting Overleaf

The wrong document is compiling

Check the main-document setting and look for another independently compilable file. Overleaf can compile an open file containing \documentclass even when it is not the configured main document. Its documentation also warns about identically named files in the root and a subfolder. Keep the main document at the top level and give independently compiled files distinct names.

A PDF appears, but the project has errors

Switch the Recompile drop-down to Stop on first error. Overleaf recommends this mode for finding compilation problems; it halts and reports an error instead of attempting to compensate. Correct the reported problem and compile again. This is particularly useful after replacing template text or changing file references.

The report times out or images disappear

Overleaf’s timeout guidance recommends checking errors first, then trying Fast [draft] mode to investigate image-processing costs. That mode replaces graphics with empty boxes. Those boxes are expected draft output, so restore normal compilation before evaluating your final figures. For image-specific syntax, see CASRAI’s guide to inserting images in Overleaf.

If a copied project behaves differently, compare its TeX Live version with the working original: Overleaf states that new copies default to the latest version. Its compiler documentation locates the project-specific settings under the gear icon, then Compiler. Match a documented template requirement rather than changing compilers at random.

The same documentation distinguishes compiler capabilities. It describes pdfLaTeX as the usual default, while XeLaTeX and LuaLaTeX support TrueType and OpenType fonts and robust UTF-8 input. For a report template with specified fonts or non-Latin scripts, inspect the template’s compiler requirement before replacing its font setup. These settings apply to the individual project, so checking one report does not establish the configuration of another.

Free alternatives to Overleaf

TeXstudio and Texmaker are alternatives for editing LaTeX outside Overleaf. Their official pages describe desktop editor features rather than the hosted template-copy workflow above. The table compares only documented features relevant to inspecting a report project.

Editor Documented report-writing features Official source
TeXstudio Open-source LaTeX editor for major operating systems, with syntax highlighting, an integrated viewer and reference checking. TeXstudio project
Texmaker Free editor for Windows, macOS and Linux, with a built-in PDF viewer, master mode for multiple files, and navigation to compilation errors. Texmaker project

Moving to a desktop editor does not remove the template’s supporting files or LaTeX requirements. Download the complete source ZIP rather than copying only the visible chapter text. Use the editor project’s official documentation for its own setup, and retain the PDF separately so you have a reference output when checking the transferred project.

Sources

Data: File roles in an Overleaf report project

Original cross-document compilation of the main document, included section files and bibliography database roles in a LaTeX report project, from Overleaf documentation. File names are illustrative; command behaviour and file roles follow the listed sources.

File roles in an Overleaf report project
File roleIllustrative filenameDocumented connectionWhat belongs in itSource URL
Main documentmain.texSelected under Compiler > Main documentDocumentclass declaration; root document that incorporates the other project partshttps://docs.overleaf.com/getting-started/recompiling-your-project/the-main-document
Included report sectionsections/results.texInserted with the input commandSection content without documentclass, begin-document or end-document wrappershttps://www.overleaf.com/learn/latex/Management_in_a_large_project
Bibliography databasereferences.bibNamed with addbibresource in a biblatex projectBibliographic records whose identifiers are used by cite commandshttps://www.overleaf.com/learn/latex/Bibliography_management_with_biblatex

Sources

Compiled by CASRAI from the sources above. Free to reuse under CC BY 4.0 with attribution.

Follow CASRAI

Research-administration guidance, standards updates and independent tool reviews.

Ask CASRAI · free to try

Ask about Overleaf Report Template: Setup and PDF Checks

2 free questions a day, no account.

An AI assistant for research: funder rules, compliance, methods and publishing. It links the sources behind its answers and labels answers that come from a web search.

Answers draw on CASRAI's guides and dictionary plus the federal and funder documents we index: Federal Register, Grants.gov, Regulations.gov and UKRI.

Works on this site and inside Claude, Cursor and the AI tools you already use.

Everything CASRAI publishes — this page, the dictionary, the guides and the news — stays open to read, with no account and no card.

Referenced across the research world

University of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logoUniversity of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logo
  • University of Cambridge logo
  • Columbia University logo
  • Crossref logo
  • University of Edinburgh logo
  • Harvard University logo
  • University of Oxford logo
  • Princeton University logo
  • Stanford School of Medicine logo
  • University College London logo
  • ORCID logo

View CASRAI adoption →