Skip to main content
v2026.11,986 entries · CC-BY 4.0
LAC HealthSponsored

Shop en 166 supplies

  • FDA registered
  • ISO 13485
  • BBB Accredited A+

Shop at LAC Health

EN 166 Eye Protection: Markings and EN ISO 16321

How to read EN 166 frame and lens markings, what S, F, B and A mean, and why EN ISO 16321-1 replaced EN 166 for new certifications.

Written and maintained by CASRAI Editorial Board

Published · Last updated

On this page

Short answer: EN 166 is the European standard that set the general specifications for personal eye protection, and the letters and numbers printed on a frame or lens are its marking code. Since 11 November 2025 EN ISO 16321-1 is the only valid standard for new certifications in the UK and EU, so EN 166 now mostly appears on stock certified earlier (BSI, checked 2026-11-01). This page is general product information, not medical or occupational-health advice.

What EN 166 covers

HSE’s operational manual lists the standard as “EN 166:2001 – Personal eye protection – specifications”. It is the general standard for spectacles, goggles and face shields; filter-specific standards sit beside it, for example EN 169 and EN 379 for welding filters, EN 170 for UV, EN 171 for infrared and EN 172 and EN 1836 for sunglare (HSE OM 2009/003, Appendix 3, Issue 8, January 2013). The 2013 HSE text was written under the old PPE Directive 89/686/EEC, so use it to decode markings, not as a statement of current law. For the US counterpart, see ANSI Z87.1 markings on safety glasses.

How to read an EN 166 marking

EN 166 marks sit in two places, each with a fixed order (HSE, 2013):

Where Order of marking, left to right
Frame Manufacturer identification, EN 166, fields of use, mechanical strength
Lens (ocular) Scale number (filters only), manufacturer identification, optical class, mechanical strength, fields of use, scratch resistance, fog resistance, radiant heat

An illustrative frame marking, not a real product, reading “XYZ EN 166 3 4 B”, decodes in that order as: manufacturer mark XYZ; the standard EN 166; field of use 3 (liquid droplets for goggles) and 4 (coarse dust particles); mechanical strength B (medium energy impact, goggles and face shields only).

Mechanical strength and fields of use

Mark Meaning per HSE (2013)
S Increased robustness (oculars only)
F High speed particles, low energy impact (any type)
B High speed particles, medium energy impact (goggles and face shields only)
A High speed particles, high energy impact (face shields only)
3 Liquid droplets (goggles) or liquid splashes (face shields, but not mesh)
4 Coarse dust particles
5 Gas and fine dust particles
9 Molten metals and hot solids
8 Short-circuit electric arc (face shield oculars); HSE notes the arc requirements were shown to be inadequate for practical short-circuit arc protection

Optical class is 1, 2 or 3, and HSE gives class 1 as the top class. For filtering lenses the scale number joins a code number and a shade number with a hyphen, so an infrared filter of shade 4 reads 4-4; a higher shade means stronger filtering.

EN 166 and EN ISO 16321

BSI states that EN ISO 16321 replaces EN 166 and related standards (EN 170, 171, 172 and 379). From 11 November 2025, EN ISO 16321-1 is the only valid standard for new certifications in the UK and EU, and EN 166:2001 no longer gives presumption of conformity. Existing EN 166 products may be sold until their certification expires, up to a maximum of five years from the date of issue. BSI lists the changes as updated high-speed impact levels, a new high-mass impact test with a 500 g steel projectile, six headform sizes, stricter light transmittance and a 120-minute heat stability test. The series has Part 1 (general), Part 2 (welding-related) and Part 3 (mesh protectors); Part 4 (biological hazard) is under development (BSI blog, checked 2026-11-01). Because withdrawal and transition dates can be amended, check the current Official Journal listing and the supplier’s declaration of conformity for the standard a given product was certified to.

What to check on eyewear and its paperwork

  • Read the frame line and the lens line separately; the two orders differ, and a frame mark does not describe a different lens fitted to it.
  • Check that the strength letter is allowed for the type: B is for goggles and face shields, A for face shields only (HSE, 2013).
  • Note which standard the item cites. EN 166 on a product points to stock certified under the older regime; EN ISO 16321 points to the newer one.
  • Equipment can carry the CE mark with no standard number if the manufacturer used the technical-file route; the manufacturer’s information then gives the performance specification (HSE, 2013).

For how marked eyewear fits a hazard assessment, see face shields versus safety goggles, what safety goggles are, safety glasses side shields and PPE selection for chemical handling.

Common misunderstandings

“EN 166 is a rating of how strong the eyewear is.” It is a specification with a marking code; strength is only the letter S, F, B or A within it. “A higher optical class number is better.” The reverse: class 1 is the top class. “EN 166 is still the current standard.” Per BSI it has been replaced by EN ISO 16321 for new certifications since 11 November 2025.

FAQ

What does EN 166 mean on safety glasses?

It shows the frame was made to the European general specification for personal eye protection, EN 166:2001, and is followed by the field-of-use and strength marks.

Is EN 166 still valid?

For new certifications, no: BSI says EN ISO 16321-1 is the only valid standard from 11 November 2025. Existing certified products can be sold until the certificate expires, at most five years from issue.

What do the letters F, B and A mean?

They mark impact resistance to high speed particles: F low energy (any type), B medium energy (goggles and face shields), A high energy (face shields only).

Sources

Follow CASRAI

Research-administration guidance, standards updates and independent tool reviews.

Ask CASRAI · free to try

Ask about EN 166 Eye Protection: Markings and EN ISO 16321

2 free questions a day, no account.

An AI assistant for research: funder rules, compliance, methods and publishing. It links the sources behind its answers and labels answers that come from a web search.

Answers draw on CASRAI's guides and dictionary plus the federal and funder documents we index: Federal Register, Grants.gov, Regulations.gov and UKRI.

Works on this site and inside Claude, Cursor and the AI tools you already use.

Everything CASRAI publishes — this page, the dictionary, the guides and the news — stays open to read, with no account and no card.

Referenced across the research world

University of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logoUniversity of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logo
  • University of Cambridge logo
  • Columbia University logo
  • Crossref logo
  • University of Edinburgh logo
  • Harvard University logo
  • University of Oxford logo
  • Princeton University logo
  • Stanford School of Medicine logo
  • University College London logo
  • ORCID logo

View CASRAI adoption →