Written and maintained by CASRAI Editorial Board
Published
On this page
FAARFIELD (Federal Aviation Administration Rigid and Flexible Iterative Elastic Layered Design) is the standard computer software program developed and mandated by the Federal Aviation Administration for structural thickness design and evaluation of civil airport pavements. Accompanying FAA Advisory Circular AC 150/5320-6G, FAARFIELD uses linear elastic layered analysis for asphalt pavements and three-dimensional finite element modeling for Portland cement concrete slabs, calculating the cumulative fatigue damage inflicted by mixed aircraft fleets over a multi-decade structural design life.
What is FAARFIELD and what is it used for?
Civil airport pavements must withstand extreme mechanical wheel loads delivered by commercial and military aircraft weighing up to one million pounds with tire pressures exceeding 200 pounds per square inch. FAARFIELD serves as the mandatory structural thickness design standard for all civil airfield pavement construction, reconstruction, and structural overlay projects funded through federal airport grant programs in the United States.
Engineers utilize FAARFIELD for six core functions:
- New flexible pavement design: Determining thicknesses for asphalt surfaces, stabilized bases, crushed aggregate bases, and subbases over subgrade soils.
- New rigid pavement design: Sizing Portland cement concrete (PCC) slabs, joint layouts, and stabilized subbases.
- Structural overlay design: Engineering flexible and rigid overlays over existing distressed pavements.
- Fatigue life evaluation: Computing remaining structural life and allowable departures for projected aircraft fleets.
- Subgrade compaction depth: Determining required soil compaction depths to prevent deep shear failure.
- ACR-PCR strength reporting: Computing standardized Pavement Classification Ratings under FAA AC 150/5335-5D and ICAO standards.
Software maintenance and development are led by the Airport Technology Research and Development Branch at the FAA Tech Center in Atlantic City, New Jersey. Empirical validation is conducted using full-scale multi-wheel landing gear traffic testing at the National Airport Pavement Test Facility (NAPTF).
Regulatory framework: FAA AC 150/5320-6G, AC 150/5335-5D, and 14 CFR Part 139
Civil airport engineering operates under distinct federal legal and technical frameworks. A common question among practitioners is whether 14 CFR is the same as FAR. In aviation vernacular, practitioners frequently use “FAR” to refer to Federal Aviation Regulations. However, within official United States federal administrative law, “FAR” formally designates the Federal Acquisition Regulation (Title 48 CFR). To avoid contractual ambiguity, the Federal Aviation Administration officially refers to its safety and certification rules as Title 14 of the Code of Federal Regulations (14 CFR).
Under 14 CFR Part 139 (Certification of Airports), 14 CFR § 139.305 legally mandates that commercial airport operators maintain all runway, taxiway, and loading apron pavements in safe operational condition. Pavements must remain free from loose aggregate, mud, ponding water, and foreign object debris (FOD), with structural strength sufficient to prevent hazardous rutting or cracking under authorized aircraft operations.
FAA Advisory Circular AC 150/5320-6G establishes the technical engineering standard required to fulfill these safety obligations. Adherence to AC 150/5320-6G and FAARFIELD is mandatory for all projects receiving Airport Improvement Program (AIP) or Passenger Facility Charge (PFC) funding. State aviation agencies, such as the Texas Department of Transportation (TxDOT) Aviation Division, also mandate FAARFIELD for state block-grant projects. Complex airfield projects frequently involve an FAA designated engineering representative or FAA regional pavement engineer to review project design assumptions.
In parallel, AC 150/5335-5D details pavement strength reporting using the ICAO Aircraft Classification Rating – Pavement Classification Rating (ACR-PCR) system, which replaces legacy ACN-PCN reporting. FAARFIELD 2.1 is the official computational tool for determining PCR values published in Aeronautical Information Publications.
Airfield infrastructure: Airfield geometry, traffic areas, and operational demands
Understanding FAARFIELD structural design requires distinguishing the airfield from the broader airport complex. What is an airfield in an airport? While the airport includes landside facilities—such as passenger terminals, parking structures, and ground transit corridors—the airfield refers specifically to the airside operational area dedicated to aircraft ground maneuvers, takeoffs, and landings.
Airfield geometric parameters—such as runway lengths, safety areas, and taxiway clearances—are planned under FAA AC 150/5300-13B, contrasting with highway alignments governed by manuals like the AASHTO Green Book. Within those geometries, FAARFIELD sizes pavement thickness based on operational traffic concentration across three designated functional areas:
- Critical traffic areas: Taxiways, runway turnaround loops, holding aprons, and the central runway keel section (the middle 50 to 75 feet). Pavements in these zones experience full aircraft gross weights at slow rolling speeds with minimal wing lift, requiring full structural design thickness.
- Non-critical traffic areas: The outer lateral edges of runways. High aircraft roll speeds produce aerodynamic wing lift that reduces wheel loads, allowing AC 150/5320-6G to permit thickness reductions up to 30 percent relative to critical keel sections while maintaining baseline minimums.
- Non-traffic areas and shoulders: Paved shoulders resisting jet blast erosion and water infiltration, designed to support occasional emergency maintenance vehicle passes rather than routine aircraft operations.
How FAARFIELD works: Mechanistic-empirical models and Cumulative Damage Factor
FAARFIELD replaces historical empirical single-aircraft curves with a mechanistic-empirical (M-E) framework. The program computes physical mechanical responses (stresses, strains, deflections) under complex landing gear assemblies and correlates those responses to structural fatigue life using calibrated damage transfer functions.
FAARFIELD applies two structural analysis engines based on pavement type:
- Linear elastic layered analysis (LEAF): For flexible asphalt pavements, LEAF treats the structure as an infinite half-space of isotropic, elastic horizontal layers. It evaluates horizontal tensile strain at the bottom of asphalt courses (fatigue cracking) and vertical compressive strain at the subgrade surface (subgrade rutting).
- Three-dimensional finite element modeling (FAAMesh / FEAFAA): For rigid concrete slabs, FAARFIELD uses a 3D finite element mesh simulating multiple jointed slabs with dowel bar load transfer, tied longitudinal joints, and base friction, calculating edge bending stresses under multi-wheel gear loads.
Structural damage from mixed traffic is calculated using the Cumulative Damage Factor (CDF) based on Miner’s hypothesis of linear damage accumulation:
CDF = Σ (ni / Ni)
Here, ni is the projected number of passes for aircraft type i, and Ni is the allowable number of passes to fatigue failure under that aircraft’s wheel load. Pavement structural failure occurs when CDF reaches 1.0 (100 percent fatigue life consumed). FAARFIELD iteratively adjusts layer thicknesses until peak CDF converges to 1.00.
Additionally, FAARFIELD models lateral aircraft wander by applying a normal Gaussian transverse distribution across the runway or taxiway width. Rather than assuming all wheels follow a single line, the program calculates damage across discrete transverse strips, with the governing thickness determined by the maximum cumulative damage strip.
Step-by-step engineering procedure for airport pavement thickness design
Designing an airfield pavement section in FAARFIELD 2.1 follows a structured seven-step procedure:
- Assemble traffic fleet projections: Input aircraft models, projected annual departures, annual growth rates, and operating gross weights over the design life (typically 20 years). FAARFIELD’s built-in library supplies verified landing gear geometries and tire contact areas.
- Characterize subgrade properties: Determine subgrade strength from field borings and laboratory tests. Flexible designs require California Bearing Ratio (CBR) or resilient modulus (Mr), correlated as Mr = 1500 × CBR (in psi). Rigid designs require the modulus of subgrade reaction (k-value).
- Select pavement structure type: Designate flexible pavement, rigid concrete pavement, or a structural overlay on existing pavement.
- Define layer stratigraphy and material moduli: Assign standard FAA specifications from AC 150/5370-10, including Item P-401 asphalt surface (fixed 200,000 psi design modulus), Item P-501 concrete slab (4,000,000 psi elastic modulus, 650 psi flexural strength), Item P-403 asphalt base, Item P-306 econocrete, Item P-209 crushed aggregate base, and Item P-154 subbase.
- Select the iterative design layer: Choose the target layer whose thickness FAARFIELD will modify during computation (typically the asphalt surface course, aggregate base, or concrete slab).
- Execute structural computation and verify CDF convergence: Run the design module to iterate layer thickness until maximum CDF equals 1.00. Review the damage output table to identify the critical aircraft driving thickness.
- Check subgrade compaction and frost penetration: Confirm that subgrade compaction meets minimum depth requirements to prevent shear failure, and verify total pavement thickness satisfies seasonal frost protection depths.
Sourced technical comparison: Airfield pavement modeling across federal and international systems
Airfield pavement thickness design differs fundamentally from highway design due to substantial differences in wheel loads, tire pressures, and lateral wander. The dataset table below compares structural analysis engines, governing agencies, and failure criteria across major airfield and highway pavement software suites.
Within FAA practice, Table 1 details the standard pavement materials defined in Advisory Circular AC 150/5370-10H, their design moduli in FAARFIELD, and their primary structural functions.
| FAA Item Specification | Material Description | FAARFIELD Design Modulus | Minimum Thickness | Primary Structural Function |
|---|---|---|---|---|
| Item P-401 | Plant Mix Asphalt Pavement | 200,000 psi (fixed standard) | 4.0 inches (gross weight exceeding 60,000 lbs) | Flexible surface course resisting wheel shear, fuel, and weather |
| Item P-501 | Portland Cement Concrete Pavement | 4,000,000 psi (elastic); 650 psi flexural | 6.0 inches (general); 8.0+ inches (heavy) | Rigid structural slab distributing heavy gear loads across joints |
| Item P-403 | Asphalt Treated Base (ATB) | 150,000 to 200,000 psi | 4.0 inches | Stabilized asphalt base preventing moisture pumping and degradation |
| Item P-306 | Econocrete Base Course | 700,000 to 1,400,000 psi | 4.0 to 6.0 inches | Lean concrete rigid subbase providing uniform slab support |
| Item P-209 | Crushed Aggregate Base | Modulus varies with thickness and subgrade | 6.0 inches | Granular base layer dissipating vertical stresses |
| Item P-154 | Subbase Course | Modulus derived from subgrade support | 4.0 inches | Granular drainage and frost protection layer |
Material specifications and laboratory testing for airport pavements
FAARFIELD thickness outputs rely directly on accurate laboratory characterization of construction materials. For flexible pavements, airfield specifications permit incorporation of recycled asphalt pavement into Item P-401 mixtures subject to strict binder recovery tests and maximum reclaimed binder limits. Laboratory testing must confirm moisture resistance and rutting resistance under high aircraft tire contact pressures.
For rigid pavements constructed with Item P-501 concrete, long-term durability governs field performance. Evaluating airfield concrete requires third-point beam flexural strength testing (ASTM C78) at 28 or 90 days. Ensuring robust concrete durability requires strict limits on water-cementitious materials ratios (w/cm below 0.45), entrained air content (5.0 to 7.0 percent) to resist deicing chemicals, and rigorous testing to prevent alkali-silica reactivity (ASR).
Common engineering misunderstandings and design pitfalls
Practitioners transitioning from highway engineering to airfield design frequently encounter conceptual errors:
- Applying Equivalent Single Axle Loads (ESALs): Highway design converts traffic into 18,000-pound axle repetitions. Airfield gears deliver wheel loads exceeding 60,000 pounds per tire with multi-wheel interaction. FAARFIELD models actual landing gear geometries directly; ESAL conversions are completely invalid.
- Relying on a single “design aircraft”: In FAARFIELD, a single heavy aircraft does not drive thickness in isolation. A narrower-gear aircraft with high annual departures frequently contributes a higher percentage of cumulative fatigue damage than an occasional wide-body flight.
- Neglecting subgrade compaction depth: Heavy aircraft wheel loads produce deep stress bulbs. If subgrade soils are not compacted to required densities to the depth calculated by FAARFIELD, subgrade shear failure and deep rutting will occur regardless of surface thickness.
- Interpreting PCR as a hard weight limit: Under AC 150/5335-5D, PCR represents a standardized administrative rating. An aircraft whose ACR slightly exceeds the published PCR is evaluated through airport overload procedures rather than facing automatic prohibition.
- Uncorrected resilient modulus inputs: Direct substitution of dry laboratory resilient modulus values without adjusting for seasonal moisture or poor subgrade drainage leads to premature pavement failure.
Jurisdiction and applicability: Where FAA pavement standards apply
Engineers and researchers frequently ask where FAA standards and credentials apply: where can I use my FAA qualifications and design tools? The answer depends on whether the question refers to engineering standards or personnel licenses.
From an infrastructure perspective, FAA Advisory Circular AC 150/5320-6G and FAARFIELD are mandatory at all civil public-use airports in the United States and U.S. territories that belong to the National Plan of Integrated Airport Systems (NPIAS) and accept federal grant funds. State aviation block-grant programs enforce these same standards for general aviation airports. Internationally, civil aviation authorities across Europe, Asia, and Latin America recognize FAARFIELD as a compliant design methodology under ICAO Aerodrome Design Manual standards.
In contrast, when the query concerns individual FAA airman certifications—such as pilot licenses, remote pilot (Part 107) certificates, or airframe and powerplant (A&P) mechanic ratings—the credential is valid across all 50 states and recognized globally across ICAO member states under bilateral aviation safety agreements.
Frequently asked questions
What is an airfield in an airport?
An airfield is the specific portion of an airport dedicated to the movement, takeoff, landing, taxiing, and ground servicing of aircraft. While the broader airport encompasses landside passenger terminals, parking garages, and ground transit facilities, the airfield comprises the airside operations area (AOA). Key paved components include runways, taxiways, apron parking positions, and holding bays, which are designed in FAARFIELD to distinct thickness standards based on critical or non-critical traffic classification.
Is 14 CFR the same as far?
In casual aviation conversation, pilots and managers often refer to “the FARs” as Federal Aviation Regulations. However, within official United States federal legal terminology, 14 CFR (Title 14 of the Code of Federal Regulations) is the correct designation for FAA safety, certification, and airport rules. In federal law, “FAR” formally designates the Federal Acquisition Regulation (Title 48 CFR) governing government procurement contracts. Mandatory airport pavement maintenance standards are codified in 14 CFR Part 139.
What is Faarfield used for?
FAARFIELD is the Federal Aviation Administration’s official software program used for calculating structural pavement thickness for flexible (asphalt) and rigid (concrete) airfield pavements, designing structural overlays, evaluating remaining fatigue life, and calculating Pavement Classification Ratings (PCR) under AC 150/5320-6G and AC 150/5335-5D. Its use is mandatory for civil airport projects receiving federal Airport Improvement Program (AIP) grant assistance.
Where can I use my FAA?
For airfield pavement design, FAA standards and FAARFIELD apply to all federally obligated civil public-use airports in the United States and are widely utilized internationally under ICAO aerodrome design guidelines. For individual FAA personnel credentials (such as pilot licenses or A&P mechanic certificates), the certificate is valid across the United States and recognized globally under bilateral aviation safety agreements.
How does FAARFIELD model aircraft gear wander?
FAARFIELD models lateral aircraft gear wander by applying a normal Gaussian transverse distribution across the pavement width, dividing the cross-section into discrete lateral tracking strips. The program computes strain and fatigue damage contributed by each aircraft wheel across each transverse interval, sizing the pavement based on the peak cumulative damage strip.
What happens when the Cumulative Damage Factor exceeds 1.0?
When the Cumulative Damage Factor (CDF) reaches 1.0, the pavement structure has exhausted 100 percent of its design fatigue life under the modeled traffic fleet. In design mode, FAARFIELD automatically increases layer thickness until peak CDF converges to exactly 1.00. In evaluation mode on existing pavements, a CDF exceeding 1.0 indicates that structural fatigue failure is imminent, signaling the need for structural overlay or reconstruction.
Sources
- Federal Aviation Administration: Airport Design Software, checked 2026-11-20
- Federal Aviation Administration: AC 150/5320-6G – Airport Pavement Design and Evaluation, checked 2026-11-20
- Federal Aviation Administration: AC 150/5335-5D – Standardized Method of Reporting Airport Pavement Strength – PCR, checked 2026-11-20
- Legal Information Institute, Cornell Law School: 14 CFR § 139.305 – Paved areas, checked 2026-11-20
- Texas Department of Transportation: Aviation resources and opportunities, checked 2026-11-20
- Federal Highway Administration: Pavements, checked 2026-11-20
Data: Airfield and Heavy Highway Pavement Structural Design Software Comparison
Original engineering synthesis comparing structural analysis engines, traffic characterization models, fatigue failure criteria, and regulatory mandates across standard airfield and heavy highway pavement thickness design software suites. Compiled from Federal Aviation Administration Advisory Circulars, Federal Highway Administration manuals, and state transportation aviation specifications.
Period covered: 2021-2026. Coverage: United States and International.
| Design Software | Governing Agency | Primary Standard | Flexible Pavement Engine | Rigid Pavement Engine | Traffic Damage Methodology | Design Failure Threshold |
|---|---|---|---|---|---|---|
| FAARFIELD 2.1 | Federal Aviation Administration (FAA) | FAA AC 150/5320-6G | Layered elastic analysis (LEAF) | 3D finite element mesh (FAAMesh / FEAFAA) | Cumulative Damage Factor (CDF) across mixed fleet | CDF reaches 1.0 at design life end |
| BAKFAA 3.3.0 | Federal Aviation Administration (FAA) | FAA AC 150/5370-11 | Layered elastic backcalculation | Layered elastic backcalculation | Deflection basin matching from falling weight deflectometer | Root mean square deflection error minimization |
| PCASE 2.09 | U.S. Army Corps of Engineers (USACE) | UFC 3-260-02 | Layered elastic analysis and empirical Westergaard | Finite element and empirical Westergaard equations | Pass-to-coverage ratios with mixed military traffic | Structural index and coverage limit exhaustion |
| AASHTO Pavement ME | AASHTO / FHWA | AASHTO MEPDG Manual of Practice | Multi-layered elastic theory (JULEA) | 2D finite element neural network (ISLAB2000) | Axle load spectra across vehicle classes | Terminal rutting depth (e.g. 0.75 in) and fatigue cracking (e.g. 15%) |
| COMFAA 3.0 | Federal Aviation Administration (FAA) | FAA AC 150/5335-5D | Layered elastic strain computation | Westergaard interior and edge slab equations | Aircraft Classification Rating (ACR) derivation | Reference subgrade elastic deflection limit |
Sources
- Airport Design Software (accessed 2026-11-20)
- AC 150/5320-6G - Airport Pavement Design and Evaluation (accessed 2026-11-20)
- AC 150/5335-5D - Standardized Method of Reporting Airport Pavement Strength - PCR (accessed 2026-11-20)
- Pavements - Federal Highway Administration (accessed 2026-11-20)
Compiled by CASRAI from the sources above. Free to reuse under CC BY 4.0 with attribution.







