Written and maintained by CASRAI Editorial Board
Published · Last updated
On this page
General product and regulatory information only; this is not medical advice, and it does not describe any surgical or fitting procedure. Decisions about an individual patient belong with the treating clinician.
Short answer
A gold eyelid weight is one version of an eyelid weight: a small, contoured weight used for gravity-assisted treatment of lagophthalmos, the incomplete closure of the eyelid. Under U.S. FDA rules (21 CFR 886.5700) eyelid weights are prescription devices, and gold is only one of five listed materials. External weights are exempt from 510(k) notification; both external and implantable weights are Class II.
Definition and scope
21 CFR 886.5700 defines an eyelid weight as a prescription device made of gold, tantalum, platinum, iridium, or surgical-grade stainless steel. It is rectangular and contoured to the shape of the eye, and its stated purpose is gravity-assisted treatment of lagophthalmos (incomplete eyelid closure). The regulation recognises two forms:
- External eyelid weight: attached to the outer skin of the upper eyelid.
- Implantable eyelid weight: implanted into the upper eyelid.
The search phrases “eyelid weights” and “external eyelid weights” refer to this same device family, so they are covered on this page rather than separately.
How eyelid weights are used in practice
The regulatory text describes the mechanism in a single phrase: the weight is gravity-assisted. Added weight in the upper eyelid is intended to help the lid close. The regulation says nothing further about technique, and this page does not either; placement and sizing are clinician-directed and set out in each manufacturer’s labeling. The special controls require that labeling for external weights include instructions on placement, sizing and removal.
External vs implantable eyelid weights
Every row below comes from 21 CFR 886.5700 (checked 31 October 2026).
| Item | External weight | Implantable weight |
|---|---|---|
| Where it sits | Outer skin of the upper eyelid | Implanted into the upper eyelid |
| Device class | Class II (special controls) | Class II (special controls) |
| Premarket notification | Exempt from 510(k) (subject to the limitations in 21 CFR 886.9) | Not stated as exempt in the regulation |
| Testing named in special controls | Biocompatibility testing | Biocompatibility, sterility and shelf-life testing, nonclinical MR compatibility testing |
| MR-related labeling | Warning to remove the device before entering a magnetic resonance (MR) environment | Patient labeling on MR safety and conditions for safe scanning |
| Other labeling | Instructions on placement, sizing and removal | Patient labeling as above |
Materials and weight ranges
“Gold eyelid weight” names a material, not a separate device type. The regulation lists gold, tantalum, platinum, iridium and surgical-grade stainless steel. As one manufacturer example, FCI Ophthalmics announced FDA clearance of its Oculid line in February 2022 (reported by Eyewire News, 14 February 2022). By the manufacturer’s statement:
- The implantable weights are made of gold and platinum, in 20 weights from 0.6 g to 1.8 g in 0.2 g steps, with custom weights of 2.0 to 2.8 g on request.
- The external weights are made of tantalum, in 35 weights from 0.6 g to 1.6 g in 0.2 g steps, with adhesive strips and five skin tones.
These figures describe one company’s cleared product line and should not be read as the range for all eyelid weights.
FDA classification and the labeling checklist
FDA’s Product Classification database lists the external type under product code MML, “Weights, eyelid, external”: regulation 886.5700, Class 2, 510(k) exempt, Ophthalmic panel, not an implant. Its stated definition is “Gravity assisted treatment of lagophthalmos (incomplete eyelid closure).” The rule dates from a Federal Register notice of 21 April 2014 (79 FR 22015).
For clinic or supply staff reviewing a product’s paperwork, the special controls give a checklist to compare against the manufacturer’s documents:
- The regulation number (886.5700) and class (Class II) are identified.
- External weights: labeling covers placement, sizing and removal, and carries the warning to remove the device before an MR environment.
- Implantable weights: documentation addresses biocompatibility, sterility and shelf life, and nonclinical MR compatibility, and patient labeling covers MR safety and conditions for safe scanning.
- The material is stated, since the regulation permits five.
Related reading on CASRAI: Medical Device Amendments of 1976 (the statute behind device classes), Medical Device Reporting, what ophthalmology covers, and another device explainer, what a speculum is.
Common misunderstandings
- “Eyelid weight” does not mean gold. Gold is one of five materials in the regulation, and the manufacturer example above uses tantalum for its external line.
- External does not mean unregulated. External weights are Class II devices; only the 510(k) premarket notification is exempted, and special controls still apply.
- The 510(k) exemption is stated for external weights only. The regulation does not state it for implantable ones.
FAQ
What are eyelid weights?
Eyelid weights are prescription devices, shaped to the eye, used for gravity-assisted treatment of lagophthalmos (incomplete eyelid closure), per 21 CFR 886.5700.
What are external eyelid weights?
They are the type attached to the outer skin of the upper eyelid. FDA classifies them as Class II, exempt from 510(k), under product code MML.
Are eyelid weights MRI safe?
The regulation does not give a blanket answer. It requires external weights to carry a warning to remove the device before entering an MR environment, and implantable weights to have nonclinical MR compatibility testing and patient labeling on conditions for safe scanning. Follow the specific product’s labeling and the treating team’s advice.
Sources
- 21 CFR 886.5700, Eyelid weight, via Cornell Legal Information Institute (checked 31 October 2026).
- FDA Product Classification database, product code MML, Weights, eyelid, external (checked 31 October 2026).
- Eyewire News, 14 February 2022, FCI Ophthalmics announces FDA clearance of Oculid implantable and external eyelid weights, a manufacturer announcement (checked 31 October 2026).







