Written and maintained by CASRAI Editorial Board
Published · Last updated
On this page
To interpret Excel regression output, evaluate the results across three sequential tables: check Regression Statistics for model fit (R Square and Adjusted R Square above study benchmarks), examine ANOVA to verify overall model statistical significance (Significance F below 0.05), and inspect the Coefficients table to evaluate individual predictor effects (p-values below 0.05, t-statistics, and 95% confidence intervals). If Significance F is 0.05 or greater, the regression model as a whole does not reliably predict the dependent variable, meaning individual coefficient estimates cannot be interpreted as valid explanatory relationships.
What it is used for in research
Ordinary least squares (OLS) regression analysis is a standard quantitative method across empirical disciplines, including clinical epidemiology, social sciences, laboratory experiments, and econometrics. Researchers use linear regression to model the mathematical relationship between a continuous dependent response variable (Y) and one or more independent explanatory variables (X). In academic studies, regression fulfills two analytical objectives: predictive modeling (estimating unobserved response values from measured factor levels) and structural explanation (quantifying the unique marginal association of specific predictors while controlling for confounding covariates).
Investigators frequently use Microsoft Excel during exploratory data analysis, pilot studies, and initial data screening. The spreadsheet interface allows raw observations, descriptive statistics, and regression tables to reside on adjacent worksheets. When examining whether ambient laboratory temperature relates to enzymatic reaction rates, or assessing how departmental funding correlates with research output, Excel provides an accessible interface to evaluate linear trends prior to exporting datasets into specialized statistical pipelines. Understanding what is a regression coefficient helps researchers translate computational output into domain-specific scientific findings.
However, researchers must observe Excel’s analytical boundaries. Excel’s Analysis ToolPak generates static numerical tables rather than dynamically updating objects. If an investigator alters data points, replaces outliers, or updates measurements, the regression output does not automatically recalculate. Furthermore, the Analysis ToolPak lacks support for generalized linear models (such as logistic or Poisson regression) and does not natively compute diagnostic tests such as the Durbin-Watson statistic, Breusch-Pagan heteroscedasticity test, or Variance Inflation Factors (VIF) for multicollinearity. Integrating Excel into an academic workflow requires validating results against established statistical practices, as outlined in broader guidance on statistical analysis by Excel.
How to install or access it
Regression capabilities in Microsoft Excel are provided through the Analysis ToolPak, an add-in included with standard Microsoft Office and Microsoft 365 installations. The add-in is disabled by default until activated by the user. Because the tool relies on compiled components, activation procedures differ between Windows and macOS desktop environments.
To enable the Analysis ToolPak on Microsoft Excel for Windows, follow the official configuration steps documented by Microsoft Support:
- Open Microsoft Excel and load your workbook.
- Click the File tab in the ribbon, then select Options at the bottom of the navigation pane.
- In the Excel Options dialog, select Add-ins in the left sidebar.
- In the Manage drop-down list at the bottom of the window, verify that Excel Add-ins is selected, then click Go…
- In the Add-ins dialog, select the check box next to Analysis ToolPak. (Selecting Analysis ToolPak – VBA is optional and only necessary for Visual Basic automation routines).
- Click OK. Excel will load the add-in, adding a Data Analysis button within the Analysis group on the Data tab.
To enable the Analysis ToolPak on Microsoft Excel for Mac:
- Launch Excel on macOS.
- Click the Tools menu in the operating system menu bar.
- Select Excel Add-ins… from the drop-down menu.
- In the Add-ins available dialog, check Analysis ToolPak.
- Click OK to display the Data Analysis button under the Data tab.
An essential platform constraint confirmed in Microsoft documentation is that Excel for the Web does not support the Analysis ToolPak. Users accessing Excel in a web browser cannot execute the Data Analysis dialog or produce new regression tables. Web users can view existing regression worksheets, but running new analyses requires the desktop application or native dynamic array formulas such as LINEST.
Step-by-step task
Running an ordinary least squares regression in Excel requires structuring the dataset into contiguous numerical columns. The dependent response variable (Y) must occupy a single continuous column, while independent predictor variables (X) must be arranged in adjacent, contiguous columns. If independent columns are separated by empty space or extraneous variables, Excel rejects the selection.
Follow these numbered steps to execute a linear regression using the Analysis ToolPak:
- Navigate to the Data tab on the Excel ribbon.
- In the Analysis group, click Data Analysis.
- In the Data Analysis dialog, select Regression and click OK.
- In the Input Y Range field, enter or select the cell reference for your dependent variable, including the header row (such as
$B$1:$B$51). - In the Input X Range field, select the contiguous block encompassing all independent variables, including headers (such as
$C$1:$D$51for two predictors). - Select the Labels check box if your range selections contain text headers in the first row. This directs Excel to label output rows with variable names.
- Review the Confidence Level setting. Excel defaults to 95%. Check the box and input a custom value if your study protocol mandates a 90% or 99% confidence level.
- Under Output options, select where results will be placed:
- Choose Output Range and enter a top-left cell coordinate (such as
$F$1) to render results on the active worksheet. - Choose New Worksheet Ply to output results to a new worksheet tab.
- Choose New Workbook to place results in a separate file.
- Choose Output Range and enter a top-left cell coordinate (such as
- Under Residuals, select diagnostic outputs required for model verification:
- Check Residuals to produce an observation-level table of predicted values and raw residuals.
- Check Standardized Residuals to scale residuals by their standard error for outlier detection.
- Check Residual Plots to generate scatter plots of residuals against each independent variable.
- Check Line Fit Plots to plot predicted values against observed data.
- Check Normal Probability Plots to examine whether residuals follow a normal distribution.
- Click OK to run the model and display the regression output.
For research scenarios requiring dynamic calculations that refresh when raw data points change, researchers can use Excel’s native dynamic array formula LINEST. Entering =LINEST(known_y's, known_x's, TRUE, TRUE) into an empty cell outputs an array containing slope estimates, standard errors, R Square, regression sum of squares, and residual degrees of freedom.
Output and how to read it
The Analysis ToolPak outputs three primary summary tables: Regression Statistics, ANOVA, and the Coefficients table. When diagnostic options are selected, it also outputs a residual data table and scatter plots. For cross-software reporting comparisons, see our guide on how to read a regression table.
1. Regression Statistics table
The Regression Statistics table summarizes overall model fit and explanatory capacity:
- Multiple R: The multiple correlation coefficient, bounded between 0 and 1. For simple linear regression with one predictor, Multiple R equals the absolute value of Pearson’s correlation coefficient (r). In multiple regression, it represents the correlation between observed response values and model-predicted values. Values near 1.0 indicate strong linear association; values near 0 indicate weak association.
- R Square: The coefficient of determination (R²), calculated as the ratio of Regression Sum of Squares to Total Sum of Squares (SSR / SST). It indicates the proportion of total variance in the dependent variable explained by the regression model. An R Square of 0.74 indicates that 74% of outcome variance is explained by the predictors, with 26% attributed to unmodeled variance or measurement noise.
- Adjusted R Square: A modified coefficient of determination that penalizes model complexity. Because standard R Square mechanically increases whenever any predictor is added to a model, Adjusted R Square adjusts for degrees of freedom:
Adjusted R² = 1 – [(1 – R²)(n – 1) / (n – k – 1)]
where n is sample size and k is the number of predictors. In multiple regression models, researchers must report Adjusted R Square. If adding an explanatory variable lowers Adjusted R Square, that variable does not provide enough explanatory value to offset its consumption of a degree of freedom. - Standard Error: The standard error of the regression (s_e), calculated as the square root of Mean Squared Error (MSE). It reflects the average vertical distance between observed data points and the regression line, expressed in the original measurement units of the dependent variable. Lower values represent higher precision.
- Observations: The total number of valid observations (sample size n) included in the model after omitting missing entries.
2. ANOVA table
The ANOVA (Analysis of Variance) table partitions variation in the dependent variable into explained regression components and unexplained residual error. As defined in NIST statistical standards, this table tests whether the regression model as an entire system explains significant variance compared to an intercept-only null model:
- df (Degrees of Freedom):
- Regression df: Equals k, the number of independent variables.
- Residual df: Equals n – k – 1, representing degrees of freedom for error estimation.
- Total df: Equals n – 1, total sample degrees of freedom.
- SS (Sum of Squares):
- Regression SS (SSR): Explained sum of squares, measuring deviation between model predictions and the sample mean.
- Residual SS (SSE): Unexplained sum of squares, measuring deviations between observed data and model predictions.
- Total SS (SST): Total variation in the dependent variable, where SST = SSR + SSE.
- MS (Mean Square): Sum of squares divided by respective degrees of freedom: MSR = SSR / k and MSE = SSE / (n – k – 1).
- F: The omnibus test statistic, calculated as the ratio F = MSR / MSE. Under the null hypothesis that all population slope coefficients equal zero, this statistic follows an F-distribution with (k, n – k – 1) degrees of freedom.
- Significance F: The p-value corresponding to the F-statistic. If Significance F is below 0.05, the model explains statistically significant variance in the outcome. If Significance F is 0.05 or higher, the model does not explain variance beyond random chance, and individual predictor coefficients cannot be interpreted as meaningful effects.
3. Coefficients table
The Coefficients table presents parameter estimates, precision statistics, test metrics, and confidence intervals for each term in the regression equation:
- Coefficients: Point estimates derived from ordinary least squares estimation:
- Intercept (b_0): The expected value of Y when all independent variables equal zero. This value has practical physical interpretation only when zero represents a plausible, measured state within the study domain.
- Predictor Slopes (b_1, b_2, …): The estimated change in the dependent variable for a one-unit increase in that predictor, holding all other variables constant. For multivariable models with multiple controls, see our guidance on multiple regression in Excel.
- Standard Error: The standard deviation of the sampling distribution for each estimated coefficient. Smaller standard errors indicate greater estimation precision.
- t Stat: The test statistic computed as t = b_j / SE(b_j). It tests the null hypothesis that the population coefficient equals zero.
- P-value: The two-tailed probability of obtaining a t-statistic of equal or greater magnitude under the null hypothesis. Values below 0.05 demonstrate statistical significance at the 5% alpha level.
- Lower 95% and Upper 95%: The 95% confidence interval for each parameter, calculated as b_j ± (t_critical × SE(b_j)). If an interval spans zero (one limit negative, the other positive), the researcher cannot reject the null hypothesis of no effect at the 5% level.
Worked calculation and interpretation example
To demonstrate how these tables connect in practice, consider a laboratory study where an investigator models product yield in grams (Y) as a function of temperature in degrees Celsius (X_1) and reaction time in minutes (X_2) across n = 25 test runs. The Analysis ToolPak produces the following results:
- Regression Statistics: Observations = 25, Multiple R = 0.887, R Square = 0.787, Adjusted R Square = 0.768, Standard Error = 3.42 grams.
- ANOVA: Regression df = 2, Residual df = 22, Total df = 24. SSR = 952.4, SSE = 257.6, SST = 1210.0. MSR = 476.2, MSE = 11.71. F = 40.67, Significance F = 1.84E-07.
- Coefficients:
- Intercept: b = 14.50, SE = 4.12, t = 3.52, p = 0.0019, 95% CI [5.96, 23.04].
- Temperature (X_1): b = 0.45, SE = 0.08, t = 5.63, p = 1.12E-05, 95% CI [0.28, 0.62].
- Time (X_2): b = 1.20, SE = 0.25, t = 4.80, p = 8.45E-05, 95% CI [0.68, 1.72].
The researcher evaluates this output using three interpretive steps:
- Evaluate Model Significance: Significance F is 1.84 × 10⁻⁷, well below the 0.05 threshold. The model is statistically significant. The Adjusted R Square of 0.768 demonstrates that 76.8% of yield variance is explained by temperature and duration after adjusting for degrees of freedom. The standard error indicates that predicted yields deviate from observations by an average of 3.42 grams.
- Construct the Regression Equation: The fitted prediction model is written as:
Predicted Yield = 14.50 + (0.45 × Temperature) + (1.20 × Time) - Interpret Predictor Coefficients: Holding reaction time constant, each 1°C increase in temperature increases expected yield by 0.45 grams (95% CI [0.28, 0.62]). Holding temperature constant, each additional minute of reaction time increases expected yield by 1.20 grams (95% CI [0.68, 1.72]). Because both p-values are below 0.05 and neither confidence interval crosses zero, both predictors exert statistically significant positive effects on yield.
Reading scientific notation in Excel output
When regression models exhibit strong statistical significance, Excel frequently presents Significance F and p-values in scientific notation. For example, a cell displaying 3.45E-06 denotes 3.45 × 10⁻⁶, which expands to 0.00000345 in standard decimal form. Because 0.00000345 is substantially below 0.05, it confirms extreme statistical significance. Conversely, a value displaying 1.45E-01 represents 0.145, which exceeds 0.05 and fails to demonstrate significance. Formatting cells to display five decimal places helps prevent misinterpreting exponential notation.
Residual outputs and assumption diagnostics
Valid OLS inference requires satisfying foundational Gauss-Markov assumptions: linearity, independence, constant error variance (homoscedasticity), and residual normality. The Analysis ToolPak generates diagnostic tables and scatter charts to inspect these conditions:
- Residual Table: Reports predicted values, raw residuals (e_i = Y_i – Ŷ_i), and standardized residuals for each observation. Standardized residuals beyond ±3.0 indicate potential extreme outliers.
- Residual Plots: Scatter plots displaying residuals on the vertical axis against each independent variable on the horizontal axis. In a correctly specified model, residuals scatter randomly around zero without discernable pattern. A curved or parabolic distribution indicates non-linearity, suggesting the need for polynomial or log transformations. A funnel shape (variance expanding as X grows) indicates heteroscedasticity, which inflates standard errors and invalidates hypothesis tests.
- Line Fit Plots: Displays observed data alongside predicted model points for each independent variable.
- Normal Probability Plot: Compares residual percentiles against standard normal distribution values. Substantial departure from a straight diagonal line suggests that the assumption of normal residual distribution is violated, which can compromise inference in small samples.
The data table below summarizes each metric produced by Excel’s regression tools, detailing the output section, formula, standard interpretive benchmark, and diagnostic risk.
Troubleshooting
Researchers encountering issues with Excel regression frequently face common operational obstacles and statistical pitfalls:
1. Error: “Regression – Input range must be a contiguous reference”
This error occurs when an investigator attempts to select non-adjacent columns in the Input X Range field (such as entering C1:C50, E1:E50 while omitting column D). Excel requires all independent variables to reside in a single unbroken block of adjacent columns. To fix this, copy the required predictor columns into adjacent positions on the worksheet before opening the Regression dialog.
2. Error: “Regression – Line Fit Plots require at least one numeric variable” or non-numeric warnings
This warning indicates that selected ranges contain text characters, dates, or empty cells. If ranges include header rows, you must check the Labels box so Excel does not treat text headers as invalid numerical values. In addition, Excel cannot execute regression on rows containing blank cells or #N/A errors; missing data must be removed or imputed prior to analysis.
3. The “Constant is Zero” trap and uncentered R Square
The Regression dialog includes a checkbox labeled Constant is Zero, which forces the intercept through the origin (setting b_0 = 0). While certain physical laws dictate a zero intercept, selecting this option in Excel alters the Total Sum of Squares calculation from the mean-centered version Σ(Y_i – Ȳ)² to the uncentered version Σ(Y_i)². This mathematical shift almost always inflates R Square artificially, often producing values above 0.95 for weak models. Do not check Constant is Zero unless your experimental design specifically mandates uncentered regression, and never compare uncentered R Square against centered models.
4. The static output trap
Unlike standard worksheet formulas, Analysis ToolPak outputs are static values. If raw data points are edited, corrected, or filtered, the regression tables and charts do not update. Researchers must re-run the Regression tool manually following data changes, or implement the dynamic LINEST array formula to ensure automated synchronization.
5. Perfect multicollinearity and #NUM! errors
When two or more predictor variables are perfectly collinear (such as including identical measurements in different units, or including redundant dummy variables alongside an intercept), the predictor matrix cannot be inverted. Excel will produce #NUM! errors or drop one of the collinear variables from the output. Researchers must verify that independent variables are not linear combinations of one another.
Free alternatives
While Microsoft Excel provides a convenient environment for preliminary analysis, academic research standards emphasize reproducible scripting, programmatic pipelines, and comprehensive diagnostic capabilities. Several open-source statistical environments provide advanced linear regression tools without licensing costs.
The table below summarizes operational characteristics, licensing, and primary research applications of major free statistical alternatives compared to Excel:
| Software / Environment | License and Cost | Interface Type | Dynamic Recalculation | Built-in Diagnostic Tests | Primary Research Strengths |
|---|---|---|---|---|---|
| R Project for Statistical Computing | Open source (GPL-2 / GPL-3), Free | Command line / Script / RStudio IDE | Script-based (immediate execution on run) | Comprehensive (Breusch-Pagan, Durbin-Watson, VIF, Cook’s distance, leverage plots) | Standard platform in statistical research; exhaustive package ecosystem (CRAN); dynamic Markdown reporting |
| Python (statsmodels and scikit-learn) | Open source (BSD), Free | Script / Jupyter Notebook / IDE | Script-based (programmatic pipeline) | Extensive (Jarque-Bera, Omnibus, Condition Number, heteroscedasticity tests) | Integration with automated data engineering, machine learning workflows, and production APIs |
| Jamovi | Open source (AGPL-3), Free | Graphical User Interface (GUI) and R syntax | Dynamic (updates instantly when spreadsheet changes) | Interactive (collinearity VIF, normality tests, homoscedasticity checks) | Spreadsheet familiarity combined with real-time underlying R syntax generation for rapid analysis |
| JASP | Open source (GPL-3), Free | Graphical User Interface (GUI) | Dynamic (tables and plots refresh in real time) | Extensive (classical frequentist and Bayesian regression diagnostics) | Supported by University of Amsterdam; accessible Bayesian hypothesis testing and publication-ready tables |
| GNU PSPP | Open source (GPL-3), Free | GUI and Command Line | Command and syntax execution | Standard linear regression modeling and residual statistics | Free replacement for proprietary IBM SPSS Statistics; native support for SPSS syntax files and system formats |
For investigators transitioning from Excel to reproducible scripted workflows, fitting an ordinary least squares regression in R requires minimal syntax:
# Fit linear regression model in R
model = lm(yield ~ temperature + time, data = lab_data)
summary(model)
# Extract 95% confidence intervals and collinearity diagnostics
confint(model)
car::vif(model)
# Generate diagnostic residual plots
par(mfrow = c(2, 2))
plot(model)
In Python, the statsmodels library produces output matching standard econometric and spreadsheet tables, complete with formal residual tests:
import statsmodels.api as sm
import statsmodels.formula.api as smf
# Fit linear model in Python statsmodels
model = smf.ols('yield ~ temperature + time', data=df).fit()
print(model.summary())
Frequently asked questions
What is the difference between R Square and Adjusted R Square in Excel?
R Square measures the proportion of total variation in the dependent variable explained by the independent variables. However, R Square automatically increases whenever any new predictor is added to the model, regardless of whether that predictor has any real theoretical connection to the outcome. Adjusted R Square corrects for this mathematical inflation by incorporating degrees of freedom, penalizing the model for adding non-informative variables. In multiple regression models, researchers should always rely on Adjusted R Square to evaluate true model performance.
What does Significance F mean in the Excel regression ANOVA table?
Significance F is the p-value for the overall regression model, testing the null hypothesis that all slope coefficients are simultaneously equal to zero. If Significance F is below 0.05, the model as an entire system explains a statistically significant amount of variance in the dependent variable. If Significance F is 0.05 or higher, the model fails to demonstrate predictive capability beyond random chance, and individual predictor p-values should not be interpreted as valid research findings.
Why does Excel regression output show scientific notation like 2.15E-05?
Excel displays numbers in scientific notation when values are extremely close to zero. The notation 2.15E-05 represents 2.15 × 10⁻⁵, which equals 0.0000215 in standard decimal format. Because this number is far below the standard alpha cutoff of 0.05, it indicates a highly statistically significant result. Researchers should format Excel cells to four or five decimal places or scientific notation consciously to avoid confusing small exponential values with numbers greater than one.
Why does checking Constant is Zero inflate the R Square value?
When the Constant is Zero option is selected in Excel’s regression dialog, the model is forced through the coordinate origin (0,0). Because the regression line no longer passes through the sample mean, Excel switches from computing centered Total Sum of Squares to uncentered Total Sum of Squares. This mathematical alteration dramatically reduces the denominator in the R Square formula, producing an artificially inflated R Square that can approach 0.99 even for poorly fitting models. The option should only be used when physical theory strictly mandates zero intercept and uncentered evaluation.
Does Excel regression output update automatically when raw data changes?
No, the regression tables generated by Excel’s Analysis ToolPak are static snapshots of numerical values, not dynamic formula links. If an investigator alters raw data values, corrects errors, or removes outliers, the summary tables will not reflect those changes. To reflect updated data, researchers must re-run the Regression tool from the Data Analysis menu or utilize Excel’s dynamic LINEST array function, which recalculates automatically upon workbook changes.
How can I test for multicollinearity in Excel regression analysis?
Excel’s Analysis ToolPak does not output Variance Inflation Factors (VIF) or tolerance values natively. To assess multicollinearity in Excel, researchers can use the Correlation tool in the Data Analysis menu to inspect pairwise correlation coefficients among independent variables; correlations exceeding 0.70 or 0.80 indicate potential collinearity. Alternatively, researchers can run auxiliary regressions, treating each independent variable as the dependent variable predicted by the remaining independent variables, and calculate VIF manually using the formula VIF = 1 / (1 – R²_auxiliary).
Sources
- Microsoft Support. (2026). Load the Analysis ToolPak in Excel. https://support.microsoft.com/en-us/office/load-the-analysis-toolpak-in-excel-6a63e598-cd6d-42e3-9317-6b40ba1a66b4 (Accessed 2026-11-16).
- Microsoft Support. (2026). Use the Analysis ToolPak to perform complex data analysis. https://support.microsoft.com/en-us/office/use-the-analysis-toolpak-to-perform-complex-data-analysis-6c67ccf0-f4a9-487c-8dec-bdb5a2cefab6 (Accessed 2026-11-16).
- Microsoft Support. (2026). LINEST function. https://support.microsoft.com/en-us/office/linest-function-84d7d0d9-6e4f-4121-92f0-c7b8f9f30849 (Accessed 2026-11-16).
- NIST/SEMATECH. (2026). e-Handbook of Statistical Methods: 4.4.1. Linear Least Squares and 4.4.4. Analysis of Variance Table. National Institute of Standards and Technology. https://www.itl.nist.gov/div898/handbook/pmd/section4/pmd44.htm (Accessed 2026-11-16).
- NIST/SEMATECH. (2026). e-Handbook of Statistical Methods: 4.4.5. Residual Analysis. National Institute of Standards and Technology. https://www.itl.nist.gov/div898/handbook/pmd/section4/pmd45.htm (Accessed 2026-11-16).
- R Core Team. (2026). An Introduction to R: Linear Models and ANOVA. R Foundation for Statistical Computing. https://cran.r-project.org/doc/manuals/r-release/R-intro.html#Linear-models (Accessed 2026-11-16).
- Statsmodels Development Team. (2026). Ordinary Least Squares (OLS) Regression. Statsmodels Documentation. https://www.statsmodels.org/stable/regression.html (Accessed 2026-11-16).
Data: Linear Regression Output Metrics and Diagnostic Benchmarks
Comprehensive reference dataset compiling ordinary least squares regression metrics produced by Microsoft Excel Analysis ToolPak and statistical software, detailing table location, mathematical formulation, interpretive threshold, and diagnostic risk based on NIST and vendor specifications.
| Metric | Excel Output Section | Mathematical Formulation | Interpretation Threshold | Diagnostic Implication |
|---|---|---|---|---|
| Multiple R | Regression Statistics | Square root of R-squared; Pearson correlation r for simple linear model | 0.0 to 1.0; values closer to 1.0 indicate stronger linear association | Does not capture non-linear relationships; can be misleading without scatter plot |
| R Square | Regression Statistics | SSR / SST = 1 - (SSE / SST) | 0.0 to 1.0; percentage of response variance explained by predictors | Mechanically increases with each added variable regardless of true predictive relevance |
| Adjusted R Square | Regression Statistics | 1 - [(1 - R^2)(n - 1) / (n - k - 1)] | Penalizes model complexity; lower than or equal to R Square | Can turn negative if model accounts for less variance than expected by chance |
| Standard Error of Regression | Regression Statistics | sqrt(SSE / (n - k - 1)) | Positive value in units of dependent variable; lower indicates tighter fit | Large values indicate high dispersion of observed data points around regression surface |
| Significance F | ANOVA Table | P(F_k,n-k-1 >= F_calc) under F-distribution | Less than 0.05 indicates model explains significant variance beyond chance | Values equal to or above 0.05 indicate overall model lacks statistical significance |
| Intercept Coefficient | Coefficients Table | b_0 = y_bar - sum(b_j * x_bar_j) | Expected value of Y when all predictor variables equal zero | Extrapolation hazard if zero lies far outside observed range of predictor values |
| Predictor Slope Coefficient | Coefficients Table | b_j from least squares solution vector b = (X^T X)^(-1) X^T y | Estimated change in Y per one-unit increase in X_j, holding other variables constant | Unexpected sign or magnitude frequently indicates multicollinearity or omitted variables |
| Coefficient Standard Error | Coefficients Table | sqrt(s^2 * (X^T X)^(-1)_jj) | Sampling variability of estimated coefficient; lower indicates greater precision | Inflated standard errors reduce t-statistics, obscuring statistically significant effects |
| t Statistic | Coefficients Table | t = b_j / SE(b_j) | Absolute value greater than critical t-value (approx 1.96 at alpha = 0.05) | Values close to zero indicate coefficient is not statistically distinguishable from zero |
| P-value | Coefficients Table | Two-tailed probability P(|T| >= |t_calc|) under null beta_j = 0 | Less than 0.05 indicates statistically significant predictor effect | Values equal to or above 0.05 indicate predictor fails to demonstrate unique contribution |
| Lower 95% and Upper 95% | Coefficients Table | b_j +/- (t_crit * SE(b_j)) | 95% confidence interval for true population regression coefficient | Interval straddling zero indicates true population effect may be zero or opposite in sign |
Sources
- Microsoft Support: Use the Analysis ToolPak to perform complex data analysis (accessed 2026-11-16)
- NIST/SEMATECH e-Handbook of Statistical Methods: 4.4.4. Analysis of Variance Table (accessed 2026-11-16)
- NIST/SEMATECH e-Handbook of Statistical Methods: 4.4.5. Residual Analysis (accessed 2026-11-16)
Compiled by CASRAI from the sources above. Free to reuse under CC BY 4.0 with attribution.







