Skip to main content
v2026.11,986 entries · CC-BY 4.0

Integrated Circuit Design: Flow, Languages and Tapeout

How integrated circuit design works from RTL to tapeout, with the IEEE language standards and an open tool route to silicon for research labs.

Written and maintained by CASRAI Editorial Board

Published

On this page

Integrated circuit (IC) design is the engineering process that turns a chip specification into the files a semiconductor foundry uses to manufacture it. For a digital chip that usually means writing a register-transfer-level (RTL) description in a hardware description language such as SystemVerilog (IEEE 1800-2023) or VHDL (IEEE 1076-2019), synthesizing it to a gate-level netlist, laying it out physically, verifying it, and sending the final layout to fabrication, a hand-off called tapeout.

Ask CASRAI · free to tryQuestion about this guide? Ask CASRAI answers with linked sources. 2 free questions a day, no account.

Ask your first question freeSubscribe

Definition and scope

Integrated circuit design covers every step between “what should this chip do” and “send the layout to the foundry”. It is distinct from fabrication (making wafers), packaging (mounting and connecting the die) and post-silicon testing, although the design flow has to anticipate all three. Wikipedia’s overview of the field, a secondary source used here only for the outline of the stages, lists the sequence as system definition, architecture, logic design, circuit design (including logic synthesis and design for test), physical design (floorplanning, place and route, parasitic extraction), physical verification and signoff (including static timing), mask data preparation and tapeout, photomask and wafer fabrication, packaging, test and post-silicon validation, and finally deployment.

This page is written for researchers, lab managers and research administrators who encounter chip design through a university fabrication programme, a funded shuttle run, a cleanroom or packaging facility, or a policy programme, rather than for working verification engineers. Photonic chips follow a related but different flow; see the CASRAI guide to the photonic integrated circuit.

How the design flow works in practice

From specification to RTL

The architecture and logic-design stages end in an RTL description. Wikipedia quotes the definition that RTL “describes the exact behavior of the digital circuits on the chip”. RTL is written in a hardware description language. Two are standardized by the IEEE and both are currently listed as active on the IEEE Standards Association site (read 2026-11-12):

  • IEEE 1800-2023, “IEEE Standard for SystemVerilog: Unified Hardware Design, Specification, and Verification Language”. The board approved it on 2023-12-06 and it was published on 2024-02-28, superseding IEEE 1800-2017. The standard supports modeling at the behavioral, RTL and gate levels, and includes testbench features such as coverage, assertions, object-oriented programming and constrained random verification, plus APIs for foreign languages.
  • IEEE 1076-2019, “IEEE Standard for VHDL Language Reference Manual”. Approved 2019-09-05 and published 2019-12-23, superseding IEEE 1076-2008. It describes VHDL as a formal notation for all phases of creating an electronic system: design, verification, synthesis and test.

From RTL to a gate-level netlist

Logic synthesis maps the RTL onto the cells available in the target technology, producing what Wikipedia calls a gate-level netlist. A standard cell is a single logic gate or a simple component such as a flip-flop. The cell library and the manufacturing rules come from the foundry’s process design kit (PDK), which, in the same source’s wording, “may be provided by the foundry”.

Physical design, signoff and tapeout

Physical design places the cells and routes the wiring: floorplanning, macro placement, clock tree synthesis and routing are the stages the OpenROAD documentation lists. Signoff checks include physical verification and static timing analysis, and the work is complete at “design closure”, when the design meets its targets. The result is the layout database sent to the foundry: tapeout. After fabrication and packaging, “bringup” means powering, testing and characterizing the design in the lab.

The data table below this article sets out the standards, open tool chain, open PDK and shuttle service named in this section, with their dates, status and constraints as read on the sources’ own pages.

Terms that are easy to confuse are separated here, each as defined in the sources above.

Term What it is Not to be confused with
RTL Description of the exact behavior of the digital circuit, written in an HDL Gate-level netlist, the synthesized result mapped to technology cells
PDK The foundry-side kit for one process: rules and libraries a design is built against Standard cell, a single gate or simple component inside such a library
Tapeout Hand-off of the finished layout for manufacture Bringup, the later lab work of powering and characterizing the fabricated chip
Design closure The point at which the physical design meets its timing and other targets Tapeout, which follows signoff

Digital RTL-to-layout flows are the case documented by the sources above. Analog, mixed-signal and photonic flows differ; for circuit-level simulation, the open-source SPICE tool ngspice has its own CASRAI guide, and for a worked example of a community shuttle programme see Tiny Tapeout.

Stage-to-artefact crosswalk

The table maps each stage named in the sources to what it produces and the language or tool the sources associate with it. It is a reading aid for administrators, not a prescription for any particular project.

Stage Typical output Language or tool named in the sources
Architecture and logic design RTL description SystemVerilog (IEEE 1800-2023) or VHDL (IEEE 1076-2019)
Logic synthesis Gate-level netlist in the target technology Synthesis tools; cells come from the PDK
Floorplan, placement, clock tree, routing Physical layout OpenROAD (open source, RTL-to-GDSII)
Signoff and design closure Layout that meets timing and design rules Static timing and physical verification; DRC checks again at shuttle submission
Tapeout Layout database for the foundry OASIS upload in the Cadence SKY130 service
Bringup Characterized chip Lab testing of the fabricated device

Where it matters for labs and research programmes

An open route to silicon

Academic groups do not need a commercial foundry relationship to reach tapeout, because open tool chains and process kits exist. The OpenROAD project describes itself as “a fully autonomous, open-source tool chain for digital SoC layout generation”, focused on RTL-to-GDSII, with a goal under the IDEA programme of no loss of power, performance and area quality, little or no human intervention, and about a day of turnaround. The SkyWater SKY130 open-source PDK documents the 130 nm SKY130 process; its own documentation states that it is not intended for use in production settings at this time.

Shuttle (multi-project wafer, MPW) services then fabricate many small designs on one wafer. The Cadence service for SKY130 requires no NDA. Submitted designs must pass design rule checking (DRC) and data-integrity checks, be uploaded in OASIS format, fit a bounding box of 3.588 mm x 5.188 mm including the seal ring, and receive feedback within two weeks. In the announcement read for this page, submissions for the round closed on 2026-01-16 with delivery expected in July 2026, and Cadence does not package the chips; packaging has to be arranged separately, which is where facilities such as those covered in the guides to surface-mount technology and wafer-level packaging become relevant.

Funding and policy context

Research administrators will meet chip design through public programmes. The CASRAI dictionary covers the CHIPS and Science Act and the National Science Foundation’s FuSe programme, both of which fund semiconductor research and workforce development.

Questions to settle before a shuttle deadline

  • Which service’s closing date and delivery estimate apply, and does the schedule fit the grant period?
  • Does the layout pass the service’s design rule and data-integrity checks, and is it in the required file format (OASIS in the Cadence service)?
  • Does the design fit the bounding box, seal ring included?
  • Who will package the dies, since the Cadence service does not?
  • Where will bringup and characterization take place once chips arrive?

Common misunderstandings

  • “Chip design” is not fabrication. Designers produce files; a foundry makes the wafers, and packaging and test are further steps.
  • An open PDK is not a production process. SKY130’s documentation explicitly says it is not intended for production use at this time.
  • A shuttle does not deliver a finished product. In the Cadence service, packaging is not included, and delivery follows the closing date by months.
  • Tapeout is not the end of the project. Post-silicon validation and bringup in the lab follow.
  • The standards are languages, not tools. IEEE 1800 and 1076 define languages; synthesis, placement and routing are done by separate tools such as OpenROAD.

Frequently asked questions

What is integrated circuit design?

It is the process of turning a chip specification into a manufacturable layout, passing through architecture, RTL, synthesis, physical design, signoff and tapeout.

Which languages are used to describe digital integrated circuits?

SystemVerilog (IEEE 1800-2023) and VHDL (IEEE 1076-2019) are the two IEEE-standardized hardware description languages covered here; both are listed as active.

What is tapeout?

Tapeout is the hand-off of the finished layout data to the foundry for manufacture.

Can a university lab design a chip without a commercial foundry contract?

Open tools and an open PDK exist (OpenROAD, SKY130), and the Cadence SKY130 shuttle service described above requires no NDA, though its rounds have fixed closing dates.

Sources

Data: Integrated circuit design resources: standards, open tools and shuttle service compared

Compares the IEEE hardware description language standards, the OpenROAD tool chain, the SkyWater SKY130 open PDK and the Cadence SKY130 shuttle service by role in the design flow and by the status, dates and constraints each source's own page states. Compiled from the primary pages named in the sources list.

Integrated circuit design resources: standards, open tools and shuttle service compared
ResourceRole in the flowStatus or key constraint stated by the sourceDates stated by the source
IEEE 1800-2023 (SystemVerilog)Design, specification and verification language; behavioral, RTL and gate-level modelingActive; supersedes IEEE 1800-2017Approved 2023-12-06; published 2024-02-28
IEEE 1076-2019 (VHDL)Language for design, verification, synthesis and testActive; supersedes IEEE 1076-2008Approved 2019-09-05; published 2019-12-23
OpenROADOpen-source RTL-to-GDSII digital layout tool chain (floorplan, macro placement, CTS, routing)IDEA program goal: no loss of PPA quality, little or no human intervention, about one dayNot stated
SkyWater SKY130 open PDKProcess design kit for the SKY130 processDocumentation: not intended for production settings at this timeNot stated
Cadence SKY130 MPW serviceShuttle fabrication of submitted designsNo NDA; DRC and data-integrity checks; OASIS upload; 3.588 mm x 5.188 mm box with seal ring; feedback within 2 weeks; no packagingSubmissions closed 2026-01-16; delivery expected July 2026

Sources

Compiled by CASRAI from the sources above. Free to reuse under CC BY 4.0 with attribution.

Follow CASRAI

Research-administration guidance, standards updates and independent tool reviews.

Ask CASRAI · free to try

Ask about Integrated Circuit Design: Flow, Languages and Tapeout

2 free questions a day, no account.

An AI assistant for research: funder rules, compliance, methods and publishing. It links the sources behind its answers and labels answers that come from a web search.

Answers draw on CASRAI's guides and dictionary plus the federal and funder documents we index: Federal Register, Grants.gov, Regulations.gov and UKRI.

Works on this site and inside Claude, Cursor and the AI tools you already use.

Everything CASRAI publishes — this page, the dictionary, the guides and the news — stays open to read, with no account and no card.

Referenced across the research world

University of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logoUniversity of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logo
  • University of Cambridge logo
  • Columbia University logo
  • Crossref logo
  • University of Edinburgh logo
  • Harvard University logo
  • University of Oxford logo
  • Princeton University logo
  • Stanford School of Medicine logo
  • University College London logo
  • ORCID logo

View CASRAI adoption →