Written and maintained by CASRAI Editorial Board
Published · Last updated
This page describes products and general use; it is not medical advice.
On this page
Short answer: a Mayo stand cover is a sheet-style drape placed over the instrument tray stand (the Mayo stand) in an operating room to keep the sterile setup protected. It is a different product from a back table cover, although manufacturers list the two as siblings. Who uses it: operating room staff, sterile processing and materials-management teams, and buyers or students who need to identify the product.
What a Mayo stand cover is
A Mayo stand cover is a protective cover for the Mayo stand, the movable instrument tray used beside the operating table. Tidi Products describes its Sterile-Z Mayo Stand Cover (item 5582) as a barrier that helps maintain the sterile field during application and removal, placed over the sterile Mayo stand setup when sterile instruments or implants are not in use (Tidi product page, checked 2026-11-01). Tidi cites AORN guidance that the sterile field should be covered when not in use or during increased activity; that is Tidi’s statement of the guidance.
The MSF (Médecins Sans Frontières) medical catalogue lists a “Cover for Mayo table, non-woven, sterile” and labels it a surgical drape (MSF catalogue, checked 2026-11-01).
Mayo stand cover vs back table cover (and “Mayo stand drape”)
“Mayo stand drape” and “Mayo stand cover” are used for the same product class: the drape that goes over the Mayo stand. A back table cover is a separate product for the larger instrument table. Tidi lists the Sterile-Z Back Table Cover as providing the same compliance and protection as its Mayo stand cover, which makes the two sibling products rather than one product with two names. Match the cover to the stand or table it is made for, as stated on the product listing.
How it is built
Constructions differ by product. Three real examples:
- Tidi Sterile-Z: clear material so the user can see the instruments beneath; instructions-for-use versions are listed for a “New With Handles” and a “Legacy No Handles” design.
- MSF catalogue cover: non-woven material.
- McKesson-listed item 16-I80-13106-S (a distributor listing, used here as a product example): polyethylene (PE) film at 54 gsm combined with SMS fabric, with a 43 gsm SMS reinforcement zone, low-linting, fan-folded with instructional stamps for aseptic placement, flat closure, latex-free, and meeting Class 1 flammability under 16 CFR 1615.
SMS stands for spunbond-meltblown-spunbond, a layered non-woven fabric; “gsm” is grams per square metre, a measure of material weight.
Sizes seen on real products
There is no universal size. The two published sizes below differ by more than a factor of two in length.
| Product example | Stated size | Source |
|---|---|---|
| Tidi Sterile-Z Mayo Stand Cover, item 5582 | 30 in x 26 in | Tidi Products product page |
| McKesson-listed item 16-I80-13106-S | 29.5 in x 57 in | McKesson product listing |
Regulatory status
In the United States, a device made of natural or synthetic materials and intended as a protective patient covering to isolate a surgical incision site from microbes and other contamination is regulated under 21 CFR 878.4370, “Surgical drape and drape accessories.” The regulation classifies it as Class II (special controls) and lists several drape types exempt from 510(k) premarket notification, subject to the limitations in 21 CFR 878.9, including a surgical drape without an antimicrobial agent (Cornell LII mirror of the CFR, checked 2026-11-01). The regulation text does not name Mayo stand covers; the MSF catalogue labels its Mayo table cover a surgical drape.
Safe handling basics
- A cover supplied sterile must remain sterile until use (MSF catalogue).
- MSF describes its cover as single-use, intended for one patient during a single procedure; the McKesson listing describes its item as sterile, individually packaged and single use.
- Fan-folding with printed instructions, as on the McKesson-listed item, is intended to support aseptic placement. Follow the manufacturer’s instructions for use for the specific product.
- Per Tidi, the cover helps keep the setup protected when instruments or implants are not in use.
Common mistakes
- Treating “Mayo stand cover” and “back table cover” as interchangeable; they are listed as separate products.
- Assuming a standard size; the published examples above differ widely.
- Assuming a cover is single-use or supplied sterile without checking the product’s own labeling.
FAQ
Is a Mayo stand cover the same as a back table cover?
No. Manufacturers list them as separate, sibling products; Tidi states that its back table cover offers the same compliance and protection as its Mayo stand cover.
Is a Mayo stand cover a surgical drape?
The MSF catalogue labels its sterile Mayo table cover a surgical drape. The text of 21 CFR 878.4370 covers surgical drapes generally and does not name Mayo stand covers.
Is a Mayo stand cover single-use?
The MSF and McKesson-listed examples are described as single-use. Check the labeling of the specific product.
What size is a Mayo stand cover?
It varies by product: 30 x 26 in for Tidi item 5582 and 29.5 x 57 in for the McKesson-listed item above.
Related CASRAI guides
See laparotomy drapes, shoulder drapes, C-arm drapes and case carts.
Sources
- Cornell LII, 21 CFR 878.4370 Surgical drape and drape accessories, https://www.law.cornell.edu/cfr/text/21/878.4370 (checked 2026-11-01)
- Tidi Products, Sterile-Z Mayo Stand Covers, https://tidiproducts.com/product-listing/sterile-z-mayo-stand-covers (checked 2026-11-01)
- MSF medical catalogue, Cover for Mayo table, non-woven, sterile, https://unicat.msf.org/cat/product/13544 (checked 2026-11-01)
- McKesson product listing 16-I80-13106-S, https://mms.mckesson.com/product/1130799/McKesson-Brand-16-I80-13106-S (checked 2026-11-01)







