Skip to main content
v2026.11,986 entries · CC-BY 4.0

Minitab 2-Sample t-Test: Setup, Output & Steps

A comprehensive guide to running a two-sample t-test in Minitab, covering stacked and unstacked data, Welch’s t-test output, and statistical assumptions.

Written and maintained by CASRAI Editorial Board

Published · Last updated

On this page

A 2-sample t-test in Minitab evaluates whether the unknown population means of two independent groups differ significantly by analyzing continuous response data. Accessed through the menu path Stat → Basic Statistics → 2-Sample t, Minitab accommodates stacked, unstacked, or summarized sample data. By default, Minitab applies Welch’s t-test without assuming equal population variances, calculating an unpooled standard error and Satterthwaite degrees of freedom to protect against Type I error rate inflation in empirical research.

What it is used for in research

In quantitative empirical research, investigators frequently compare the central tendencies of two independent groups subjected to different experimental conditions, treatments, or demographic exposures. The two-sample t-test determines whether an observed disparity in sample means reflects a genuine difference in the underlying population parameters or whether it can plausibly be attributed to random sampling variation.

Before launching the procedure in Minitab, researchers must confirm that their study design satisfies key statistical criteria. The fundamental prerequisites for an independent samples t-test include:

  • Independent observations: Each measurement must originate from a distinct subject or experimental unit. If measurements represent repeated evaluations of the same subject across time or matched pairs, researchers must use a paired t-test rather than an independent two-sample test.
  • Continuous scale: The dependent variable must be measured on a continuous interval or ratio scale, such as temperature, blood pressure, tensile strength, or reaction time. If the outcome metric consists of defect counts or event occurrences over time, analysts should use a 2-Sample Poisson Rate test. For categorical binary classifications like pass versus fail, researchers should choose a 2 Proportions test.
  • Random sampling: Data should be collected through randomized selection or randomized allocation to ensure valid statistical inference back to the target populations.
  • Normality: The populations from which samples are drawn should follow an approximately normal distribution, although the test exhibits substantial robustness when sample sizes exceed 15 observations per group. For a detailed review of prerequisite assumptions, consult our reference on conditions for a t-test.

The statistical hypothesis structure evaluated by Minitab compares a null hypothesis against an alternative hypothesis:

  • Null hypothesis (H₀): μ₁ – μ₂ = δ₀, where the hypothesized difference δ₀ defaults to 0.0, postulating that the two population means are identical.
  • Alternative hypothesis (H₁): μ₁ – μ₂ ≠ δ₀ for a two-tailed test, asserting that a difference exists regardless of direction. Researchers can also specify directional one-tailed alternatives: μ₁ – μ₂ > δ₀ (upper-tailed) or μ₁ – μ₂ < δ₀ (lower-tailed).

While the two-sample t-test is ideal for two-group contrasts, empirical projects evaluating three or more experimental treatment groups simultaneously must avoid running multiple pairwise t-tests, which rapidly inflates family-wise error rates. For multi-group factor analyses, investigators should refer to our walkthrough on ANOVA in Minitab. To explore how Minitab integrates hypothesis testing into broader statistical workflows, see our platform guide on what Minitab is used for.

How to install or access it

Minitab Statistical Software is distributed officially by Minitab, LLC through its central product portal at minitab.com/en-us/products/minitab. The vendor delivers the platform through two coordinated software architectures:

  • Minitab Desktop Application: A native Windows 64-bit application installed on local workstations. It provides high-throughput local computing, project file management (.MPX format), worksheet handling (.MWX format), and execution of session command macros.
  • Minitab Web App: A cloud-based web application accessible through modern desktop web browsers including Google Chrome, Microsoft Edge, and Mozilla Firefox. The web interface replicates desktop menu navigation and dialog configurations, saving projects directly to cloud storage solutions such as Microsoft OneDrive or Google Drive.

Academic researchers, laboratory scientists, and university students typically access Minitab through university-wide licensing arrangements, departmental Named User licenses, or virtual desktop infrastructure (VDI). Minitab accounts authenticate through single sign-on (SSO) tied to institutional email credentials via the Minitab License Portal. Investigators should ensure that their workstation or web session is updated to the latest minor release to ensure consistency in statistical estimation routines.

Step-by-step task

Minitab accommodates three distinct data layouts in the worksheet: stacked columns, unstacked columns, and summarized summary values.

Data layout options in the Minitab worksheet

Before initiating the dialog, researchers must format their data in the worksheet according to one of the following structures:

  1. Both samples are in one column (Stacked): Quantitative response values for both groups are listed sequentially in a single column (e.g., C1 named Rating), while a second column designates group membership (e.g., C2 named Hospital containing labels ‘A’ and ‘B’). This structure is standard for tidy data and multi-factor experimental datasets.
  2. Each sample is in its own column (Unstacked): Group 1 observations reside in one column (e.g., C1 named Hospital_A), and Group 2 observations reside in a separate column (e.g., C2 named Hospital_B). This format is common when measurements are recorded by distinct laboratory instruments.
  3. Summarized data: If raw observational values are unavailable, Minitab allows analysts to enter sample descriptive statistics directly: the sample size (N), the sample mean (x̄), and the sample standard deviation (s) for each group.

Executing the test: worked hospital satisfaction walkthrough

To demonstrate the standard analytical procedure, this walkthrough uses Minitab’s official benchmark dataset HospitalComparison.MWX, which compares patient satisfaction ratings across two regional healthcare facilities (20 patients per hospital).

  1. Open Minitab and load the sample dataset HospitalComparison.MWX (or select File → Open Worksheet → Look in Minitab Sample Data folder).
  2. Navigate to the top menu bar and select Stat → Basic Statistics → 2-Sample t.
  3. In the primary dialog window, open the top drop-down menu and select Both samples are in one column.
  4. Click inside the Samples text field, highlight the column Rating in the column list, and click Select.
  5. Click inside the Sample IDs text field, highlight the column Hospital, and click Select.
  6. Click the Options button to configure inferential parameters:
    • Confidence level: Retain the default of 95.0% (corresponding to α = 0.05).
    • Hypothesized difference: Enter 0.0 to test for equality between population means.
    • Alternative hypothesis: Select Difference ≠ hypothesized difference for a two-sided test.
    • Assume equal variances: Leave this checkbox unchecked. Minitab defaults to Welch’s unpooled t-test, which prevents elevated Type I error rates when group variances differ.
  7. Click OK to close the Options dialog.
  8. Click the Graphs button and check the boxes for Individual value plot and Boxplot of data to generate visual distributional summaries. Click OK.
  9. Click OK in the main dialog to execute the analysis.

Alternative workflow: Minitab Assistant

For automated assumption verification, researchers can also run the test via Minitab’s built-in Assistant:

  1. Select Assistant → Hypothesis Tests.
  2. Under the Compare two samples with each other heading, click 2-Sample t.
  3. Specify your data layout and assign response and group columns.
  4. Click OK. The Assistant automatically evaluates normality, flags outliers, checks sample size sufficiency, and generates a structured Summary Report, Diagnostic Report, and Report Card.

Output and how to read it

Minitab displays its numerical results in the Output Pane (Session Window) structured into three core sections: Method, Descriptive Statistics, and Estimation for Difference / Test. Interpreting the benchmark hospital satisfaction analysis requires reading these sections in a methodical sequence.

1. Method specification and descriptive statistics

The Method block identifies the mathematical definitions used during computation:

  • Population means: μ₁ represents Hospital A ratings, and μ₂ represents Hospital B ratings.
  • Difference: Evaluated as μ₁ – μ₂.
  • Variance assumption: Equal variances are not assumed for this analysis.

The Descriptive Statistics table summarizes the empirical properties of each sample:

  • Hospital A: N = 20, Mean = 80.30, StDev = 8.18, SE Mean = 1.8.
  • Hospital B: N = 20, Mean = 59.30, StDev = 12.40, SE Mean = 2.8.

Key values to evaluate:

  • Sample Size (N): Group A and Group B each contain 20 observations, satisfying Minitab’s baseline threshold of 15 observations for robustness to moderate skewness.
  • Sample Mean (x̄): Hospital A yielded an average rating of 80.30, whereas Hospital B yielded an average rating of 59.30.
  • Standard Deviation (StDev): Sample dispersion is 8.18 for Hospital A and 12.40 for Hospital B, showing noticeable variance disparity.
  • Standard Error of the Mean (SE Mean): Calculated as s / √n. SE Mean is 1.8 for Hospital A and 2.8 for Hospital B, reflecting the uncertainty of each sample mean estimate.

2. Estimation for difference and confidence interval

Minitab presents the point estimate of the difference alongside its margin of uncertainty:

  • Estimated Difference: 21.00 rating points (Hospital A minus Hospital B).
  • 95% Confidence Interval for Difference: (14.23, 27.77).

The point estimate of the difference (x̄₁ – x̄₂) is 21.00 rating points. The 95% confidence interval spans from 14.23 to 27.77 points. Because this interval does not encompass zero, researchers can be 95% confident that the true difference between population means is positive and that Hospital A achieves superior patient satisfaction. Crucially, researchers must evaluate practical significance: an improvement of 14.23 to 27.77 points represents a substantial clinical enhancement on a 100-point scale.

3. Hypothesis test statistics and degrees of freedom

The inferential test table displays the test statistic, effective degrees of freedom, and p-value:

  • Null hypothesis: H₀: μ₁ – μ₂ = 0.
  • Alternative hypothesis: H₁: μ₁ – μ₂ ≠ 0.
  • T-Value: 6.31.
  • Degrees of Freedom (DF): 32.86.
  • P-Value: 0.000.

To interpret these inferential metrics correctly:

  • T-Value (6.31): The test statistic represents the ratio of the observed sample difference (21.00) relative to its combined standard error: t = (x̄₁ – x̄₂ – δ₀) / √(s₁²/n₁ + s₂²/n₂) = 21.00 / √(8.18²/20 + 12.40²/20) = 21.00 / 3.327 = 6.31.
  • Degrees of Freedom (DF = 32.86): Minitab computes degrees of freedom using the Welch-Satterthwaite approximation. Because group variances differ, effective degrees of freedom are adjusted downward from the pooled total of 38 (n₁ + n₂ – 2) to 32.86. For a complete mathematical comparison of pooled versus unpooled formulas, consult our deep dive on two-sample t-test degrees of freedom. Modern Minitab releases (v22.6 and newer) report continuous decimal degrees of freedom, whereas legacy desktop versions truncated this value to an integer (32).
  • P-Value (0.000): Because p = 0.000 (which is less than α = 0.05), researchers reject the null hypothesis and conclude that the difference in mean patient ratings between Hospital A and Hospital B is statistically significant.

4. Graphical diagnostics

When reviewing the generated boxplot and individual value plot:

  • Spread and symmetry: Compare interquartile boxes. If one group exhibits a substantially taller box or longer whiskers, variance inequality is visually apparent.
  • Outliers: Minitab plots outliers as red asterisks located more than 1.5 times the interquartile range beyond the quartiles. Examine any asterisk to determine whether it stems from a transcription error or an anomalous clinical event.

Troubleshooting

When applying two-sample t-tests to real-world empirical data, researchers frequently encounter assumption violations, power deficiencies, or data formatting challenges. Address these issues with the following verified remedies:

Severe skewness and small sample sizes

The two-sample t-test assumes that data within each population follow an approximately normal distribution. When sample sizes are small (fewer than 15 observations in either group) and data exhibit pronounced skewness, the test’s nominal Type I error rate may become distorted. To assess normality formally in Minitab:

  1. Go to Stat → Basic Statistics → Normality Test.
  2. Select your measurement column and run the Anderson-Darling test.
  3. If the p-value is below 0.05, the data deviate significantly from normality.

If sample sizes cannot be expanded and severe non-normality persists, researchers should transition to non-parametric methods. In Minitab, navigate to Stat → Nonparametrics → Mann-Whitney to perform a median-based rank test that requires no distributional assumptions. To compare parametric and rank-based assumptions across experimental designs, see our guide on parametric vs non-parametric tests.

Heteroscedasticity and variance testing

When group standard deviations differ substantially, the classical Student’s pooled t-test exhibits distorted rejection rates. To evaluate whether variances differ statistically in Minitab, select Stat → Basic Statistics → 2 Variances. Minitab executes Bonett’s test and Levene’s test to compare standard deviations.

Regardless of whether variance testing achieves statistical significance, methodological best practice strongly supports retaining Minitab’s default unpooled Welch’s test (leaving Assume equal variances unchecked). Welch’s test provides robust Type I error control under variance inequality while incurring negligible power loss when population variances happen to be equal.

Underpowered tests and non-significant results

If the t-test yields a p-value exceeding α = 0.05, researchers must avoid asserting that “no difference exists.” A high p-value simply indicates insufficient sample evidence to reject the null hypothesis. To determine whether the study possessed adequate statistical power to detect a meaningful effect size, use Minitab’s power calculator:

  1. Navigate to Stat → Power and Sample Size → 2-Sample t.
  2. Enter your sample sizes, the minimum practically important difference you wish to detect, and your observed standard deviation.
  3. Click OK to inspect the calculated statistical power. A target power of at least 0.80 (80%) is required to ensure that a non-significant finding is not merely an artifact of an underpowered sample.

Free alternatives

While Minitab provides an intuitive interface for quality engineering and research analysis, academic investigators often require open-source or freely accessible software solutions. For a comprehensive overview of non-commercial platforms, explore our directory of free statistical software for research.

The table below summarizes four leading free alternatives capable of performing two-sample t-tests, contrasting their operating platforms, execution interfaces, and key advantages.

Software Tool Platform and License Execution Interface Primary Advantages for Researchers
R (stats package) Cross-platform; GNU GPL open-source Command-line script: t.test(x, y) De facto standard in statistical computing; unpooled Welch test by default; fully reproducible scriptable workflows.
Python (SciPy) Cross-platform; BSD open-source Script function: scipy.stats.ttest_ind(a, b) Seamless integration into machine learning pipelines and scientific computing stacks; flexible Welch parameterization.
jamovi Cross-platform; AGPL open-source Point-and-click graphical spreadsheet Clean graphical interface built on R; dynamic real-time output tables; interactive assumption checks and APA-formatted exports.
JASP Cross-platform; GPL open-source Point-and-click menu interface Provides both classical Student/Welch t-tests and Bayesian independent t-tests with publication-ready output figures.

The data table below compares parameter defaults, degrees of freedom calculation methods, and non-parametric fallback tests across these statistical software packages.

Frequently asked questions

How do you run a 2-sample t-test in Minitab?

To run a 2-sample t-test in Minitab, navigate to Stat → Basic Statistics → 2-Sample t. Select whether your data are arranged with both samples in one column, each sample in its own column, or as summarized summary values. Assign your response and grouping variables, verify options under the Options button, and click OK.

Should you check Assume equal variances in Minitab?

In almost all research applications, you should leave Assume equal variances unchecked. By default, Minitab executes Welch’s t-test, which calculates an unpooled standard error and Satterthwaite degrees of freedom. This protects against elevated Type I error rates when variances differ, while sacrificing virtually no statistical power if variances are equal.

What is the difference between stacked and unstacked data in Minitab?

Stacked data places all numerical response values into a single worksheet column accompanied by a second column containing group identifier labels. Unstacked data places the numerical observations for Group 1 in one column and Group 2 in a separate column. Both configurations yield identical statistical results in Minitab.

Why does Minitab show decimal degrees of freedom in a 2-sample t-test?

Minitab displays non-integer degrees of freedom because it calculates degrees of freedom using the Welch-Satterthwaite approximation for unpooled variances. When sample variances differ, the effective degrees of freedom fall between min(n₁-1, n₂-1) and n₁+n₂-2. Modern Minitab versions (v22.6 and newer) maintain decimal precision rather than truncating to an integer.

What should you do if data violate normality in Minitab?

If sample sizes are 15 or greater per group and distributions are unimodal, the t-test remains robust to moderate skewness. If sample sizes are small or data exhibit severe asymmetry and outliers, perform a non-parametric Mann-Whitney test by selecting Stat → Nonparametrics → Mann-Whitney.

How do you test for statistical power in Minitab?

To determine statistical power or calculate necessary sample sizes for an independent two-sample comparison, choose Stat → Power and Sample Size → 2-Sample t. Enter your sample sizes, the minimum detectable difference, and the anticipated standard deviation to generate power curves.

Sources

Data: Two-Sample t-Test Parameter and Method Specifications Across Statistical Software

Comparative specifications for conducting independent two-sample t-tests across major statistical software packages, compiled from official vendor documentation and open-source software references.

Period covered: 2024/2026. Coverage: Global.

Two-Sample t-Test Parameter and Method Specifications Across Statistical Software
Software PlatformDefault Variance AssumptionDegrees of Freedom MethodData Layout OptionsNon-Parametric Alternative
MinitabUnequal variances (Welch's unpooled)Satterthwaite approximation (unrounded in v22.6+)Stacked, unstacked, or summarizedMann-Whitney test
R (stats::t.test)Unequal variances (Welch's unpooled)Welch-Satterthwaite fractional dfFormula (stacked) or two vectors (unstacked)Wilcoxon rank-sum test (wilcox.test)
Python (SciPy ttest_ind)Equal variances (Student's pooled)Exact pooled df (n1 + n2 - 2)Two array-like vectors (unstacked)Mann-Whitney U test (mannwhitneyu)
jamoviStudent's pooled (Welch selectable)Welch or Student df based on selectionStacked dependent variable with grouping factorMann-Whitney U test
JASPStudent's pooled (Welch selectable)Welch or Student df based on selectionStacked continuous variable with grouping factorMann-Whitney test

Sources

Compiled by CASRAI from the sources above. Free to reuse under CC BY 4.0 with attribution.

Follow CASRAI

Research-administration guidance, standards updates and independent tool reviews.

Ask CASRAI · free to try

Ask about Minitab 2-Sample t-Test: Setup, Output & Steps

2 free questions a day, no account.

An AI assistant for research: funder rules, compliance, methods and publishing. It links the sources behind its answers and labels answers that come from a web search.

Answers draw on CASRAI's guides and dictionary plus the federal and funder documents we index: Federal Register, Grants.gov, Regulations.gov and UKRI.

Works on this site and inside Claude, Cursor and the AI tools you already use.

Everything CASRAI publishes — this page, the dictionary, the guides and the news — stays open to read, with no account and no card.

Referenced across the research world

University of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logoUniversity of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logo
  • University of Cambridge logo
  • Columbia University logo
  • Crossref logo
  • University of Edinburgh logo
  • Harvard University logo
  • University of Oxford logo
  • Princeton University logo
  • Stanford School of Medicine logo
  • University College London logo
  • ORCID logo

View CASRAI adoption →