Skip to main content
v2026.11,986 entries · CC-BY 4.0

Missile Technology Control Regime (MTCR) Guide

A comprehensive operational guide to the Missile Technology Control Regime (MTCR), Category I and II items, U.S. EAR and ITAR rules, and research compliance.

Written and maintained by CASRAI Editorial Board

Published

On this page

The Missile Technology Control Regime (MTCR) is an informal, voluntary multilateral export control association of 35 partner nations established in April 1987 by the G-7 industrialized countries to prevent the proliferation of unmanned delivery systems capable of carrying weapons of mass destruction (nuclear, chemical, and biological). Rather than operating as a legally binding treaty, the regime relies on consensus-driven export guidelines and a technical Equipment, Software, and Technology Annex that participating sovereign states codify directly into national export control laws.

For research administrators, sponsored programs staff, and university compliance officers, understanding the MTCR is essential because its control thresholds directly shape domestic export controls. In the United States, MTCR commitments are administered through the Export Administration Regulations (EAR) under the Reason for Control “MT” (Missile Technology) and through the International Traffic in Arms Regulations (ITAR) under United States Munitions List (USML) Category IV. Academic research involving advanced rocketry, autonomous unmanned aerial vehicles (UAVs), scramjet and hypersonic propulsion, inertial navigation systems, and composite airframe materials frequently intersects MTCR-derived restrictions, requiring rigorous institutional screening and robust compliance management.

Ask CASRAI · free to tryQuestion about this guide? Ask CASRAI answers with linked sources. 2 free questions a day, no account.

Ask your first question freeSubscribe

What it is and who runs it

The Missile Technology Control Regime was established in April 1987 by Canada, France, Germany, Italy, Japan, the United Kingdom, and the United States. The regime’s initial mandate focused specifically on controlling the transfer of ballistic missiles and related technologies capable of carrying nuclear payloads. In January 1993, at the Oslo Plenary, the partners expanded the scope of the MTCR to restrict delivery systems capable of carrying all weapons of mass destruction, including chemical and biological agents. In 2002, partner nations further broadened their collective mandate to prevent sensitive missile-relevant technologies from being diverted to non-state actors and terrorist groups.

The MTCR is not a treaty, does not have international legal personality, and maintains no permanent institutional secretariat. Instead, the administrative coordination of the regime is managed by the Ministry of Europe and Foreign Affairs of France, which serves as the permanent Point of Contact (POC) in Paris. The POC receives and distributes official regime documentation, facilitates multilateral communication among partners, organizes outreach missions, and coordinates intersessional meetings.

Regime governance and technical updates are executed through three primary operational bodies:

  • The Plenary: The overarching decision-making assembly held annually, rotating among member states. The country hosting the annual Plenary assumes the MTCR Chairmanship for that year, guiding policy initiatives and coordinating diplomatic outreach.
  • Expert Working Groups: Technical bodies that convene alongside the annual Plenary and during intersessional periods, including the Technical Experts Meeting (TEM), which updates the control Annex; the Licensing and Enforcement Experts Meeting (LEEM), which exchanges national compliance practices; and the Information Exchange (IE), which discusses proliferation developments.
  • Points of Contact Meetings: Routine administrative meetings hosted by France in Paris, including the annual Reinforced Point of Contact (RPOC) meeting held in April or May to review intersessional initiatives and prepare the Plenary agenda.

All regime decisions—including the adoption of technical modifications to the control Annex, administrative procedures, and the admission of new partner countries—require the unanimous consensus of all 35 participating members. Furthermore, MTCR partners observe two vital operational principles: the no-undercut principle, under which a partner country pledges not to approve an export transfer substantially identical to one that another partner has denied within the prior three years without first consulting that partner; and the catch-all principle, which requires member nations to exercise national export control restraint over non-listed items if there is credible reason to believe they are intended for WMD delivery systems.

Eligibility and partner participation

As described on the official program page on 2026-11-14, participation in the Missile Technology Control Regime is restricted to sovereign states that demonstrate a comprehensive commitment to nonproliferation and international security. There is no open application portal or statutory right of accession. Prospective members must be approved through unanimous consensus by all existing 35 partner nations following bilateral consultations, technical evaluation missions, and multilateral review.

To be eligible for partner status, a candidate state must satisfy strict international nonproliferation criteria, including:

  • Full implementation and domestic statutory enforcement of the MTCR Guidelines and the Equipment, Software, and Technology Annex within its national legal system.
  • An established, verifiable track record of nonproliferation compliance, including adherence to relevant international treaties such as the Treaty on the Non-Proliferation of Nuclear Weapons (NPT), the Chemical Weapons Convention (CWC), and the Biological Weapons Convention (BWC).
  • Robust enforcement mechanisms and border control capabilities that prevent illicit transshipment, diversion, and unauthorized re-export of dual-use technologies within its territory, fulfilling obligations under United Nations Security Council Resolution (UNSCR) 1540.
  • Demonstrated political willingness to engage in confidential information sharing, adhere to the no-undercut rule, and uphold collective restraint regardless of commercial considerations.

The regime does not offer formal observer status. However, the MTCR actively encourages non-member nations to become unilateral adherents. Unilateral adherents formally commit through diplomatic declarations to adopt the MTCR Guidelines and Annex into their domestic export regulations without participating in internal regime deliberations or voting on Annex revisions. Sovereign states such as Israel and Romania (prior to its formal accession) have historically maintained unilateral adherence, coordinating export enforcement with partner regimes while supporting international nonproliferation standards.

What it funds or requires

The MTCR is an export control regime rather than a grant-making or funding entity; it does not distribute research grants, fellowships, or capital allocations. Instead, the regime requires participating states to implement mandatory export licensing controls, legal prohibitions, and transfer restraint over items detailed in the MTCR Equipment, Software, and Technology Annex. As described on the official program page on 2026-11-14, the Annex is systematically structured into two distinct tiers of sensitivity:

Category I Items: Strict Prohibitions and Presumption of Denial

Category I controls are restricted to Annex Items 1 and 2, which encompass complete delivery systems and major functional subsystems capable of delivering a payload of at least 500 kilograms to a range of at least 300 kilometers (the standard 500 kg / 300 km threshold originally calibrated to reflect the mass of an early nuclear warhead):

  • Item 1: Complete Delivery Systems: Ballistic missile systems, space launch vehicles (SLVs), sounding rockets, and unmanned aerial vehicle (UAV) systems—including cruise missiles, target drones, and reconnaissance drones—meeting the 500 kg payload and 300 km range criteria.
  • Item 2: Complete Subsystems: Major rocket stages, re-entry vehicles, heat shields, solid or liquid propellant rocket engines, guidance sets capable of achieving specified accuracy tolerances, thrust vector control systems, and weapon payload safing, arming, fuzing, and firing mechanisms.
  • Production Facilities: Industrial plants and specialized production equipment custom-designed for Category I systems or subsystems. The MTCR Guidelines mandate that the transfer of Category I production facilities is categorically prohibited and will not be authorized under any circumstances.

For all other Category I items, the Guidelines mandate an unconditional strong presumption to deny export authorization. Authorized transfers occur only under rare, exceptional circumstances, requiring binding government-to-government nonproliferation undertakings and explicit state-level end-use verification.

Category II Items: Dual-Use Systems and Technical Restraint

Category II encompasses Annex Items 3 through 20. These items represent dual-use equipment, specialized materials, propellants, subcomponents, and technical data that have legitimate civilian scientific, space exploration, or commercial applications, but could also be repurposed for military missile systems:

  • Propulsion and Fuel Chemistry (Items 3-5): Specialized turbojet and turbofan engines, rocket motor cases, staging mechanisms, liquid and solid propellants, and chemical oxidizers (such as hydroxyl-terminated polybutadiene, unsymmetrical dimethylhydrazine, and ammonium perchlorate).
  • Advanced Structural Materials (Items 6-8): High-strength composite airframe structures, resin-impregnated fiber materials, specialized ceramic liners, and equipment for pyrolytic deposition of carbon and ceramic matrices.
  • Guidance, Navigation, and Avionics (Items 9-11): Inertial navigation systems (INS), ring laser gyroscopes, specialized accelerometers with low bias instability, automated flight control systems, and ruggedized avionics.
  • Support, Launch, and Testing Equipment (Items 12-15): Launch support apparatus, tracking radar, analog-to-digital converters, supersonic and hypersonic wind tunnels, vibration test tables, and rocket motor test stands.
  • Software and Advanced Engineering Technology (Items 16-20): Computational fluid dynamics (CFD) modeling software, mission trajectory optimization algorithms, radar cross-section reduction (stealth) technologies, and subsystems capable of sub-Category I ranges or payloads.

Unlike Category I, transfers of Category II items are evaluated on a case-by-case basis through national export licensing review, balancing scientific utility against proliferation risk.

Application or compliance steps

In academic institutions, compliance with MTCR-derived rules is governed by domestic export regulations. In the United States, university compliance officers and sponsored programs personnel must navigate the Export Administration Regulations (ITAR and EAR compliance frameworks for academic research) administered by the Department of Commerce Bureau of Industry and Security (BIS), alongside the International Traffic in Arms Regulations administered by the Department of State Directorate of Defense Trade Controls (DDTC). Items subject to the MTCR are mapped directly into the Commerce Control List (CCL) under Reason for Control “MT” (Missile Technology, governed by 15 CFR § 742.5) or into USML Category IV (Launch Vehicles, Guided Missiles, Rockets, and Mines, 22 CFR § 121.1).

While university fundamental research is broadly protected under National Security Decision Directive 189 (NSDD-189) and the Fundamental Research Exclusion (FRE, 15 CFR § 734.8; 22 CFR § 120.34), this protection does not apply universally across aerospace and propulsion laboratories. Understanding dual-use items and technology controls is essential to ensure that physical hardware, proprietary data, and defense services remain fully compliant. University export control offices should implement the following five-step compliance workflow:

Step 1: Sponsored Project and Contract Solicitation Screening

Sponsored research proposals in aerospace engineering, mechanical engineering, materials science, and atmospheric instrumentation must be screened at inception. Compliance personnel review the project statement of work, solicitation guidelines, and draft award terms for contractual triggers that void the Fundamental Research Exclusion. Specifically, terms granting the sponsor prior publication approval rights, requiring confidential data treatment, or restricting team member participation based on nationality immediately strip the project of its fundamental research safe harbor.

Step 2: Technical Jurisdiction and Export Classification (ECCN/USML Determination)

Institutional officers must evaluate whether equipment, prototypes, software, or technical data developed or used in the laboratory fall under EAR or ITAR jurisdiction using systematic export control classification procedures:

  • If the item is specifically designed, developed, configured, or adapted for military missile or defense delivery systems, it falls under ITAR USML Category IV (or military UAVs under Category VIII).
  • If the item has dual commercial or scientific utility (e.g., civilian sounding rockets, commercial UAV flight controllers, advanced navigation sensors), it is classified on the CCL under Category 9 (Aerospace and Propulsion) or Category 7 (Navigation and Avionics). Staff must determine whether the Export Control Classification Number (ECCN) carries an “MT” reason for control (e.g., ECCNs 9A101, 9A104, 9A106, 9A110, 9B105, 9D101, 9E101, 7A101).

Step 3: Restricted Party and Foreign Entity Screening

Prior to executing collaboration agreements, purchasing specialized hardware, or admitting foreign visiting scholars to propulsion labs, universities must screen all external entities against federal consolidated screening lists. This includes checking the Office of Foreign Assets Control (OFAC) Specially Designated Nationals list, the BIS Entity List and Unverified List, and the State Department Nonproliferation Sanctions list, with special attention to institutions situated in embargoed countries and sanctioned destinations.

Step 4: Technology Control Plan (TCP) Implementation

When a laboratory utilizes export-controlled hardware, proprietary third-party CAD specifications, or non-exempt MT-controlled software, the compliance office must draft and enforce a project-specific Technology Control Plan (TCP). The TCP establishes physical and cybersecurity safeguards, including:

  • Physical security measures: Keycard-badged laboratory access, locked storage cabinets for controlled components, and visitor visual shielding.
  • Digital access barriers: Network segmentation, user-specific authentication, encrypted data storage, and strict prohibitions against hosting controlled files on shared institutional servers.
  • Personnel training: Mandatory briefings for principal investigators, graduate students, and postdocs outlining deemed export risks, unauthorized discussions, and secure data handling protocols.

Step 5: Export Licensing and Deemed Export Authorizations

If controlled technical data or source code must be shared with non-U.S. persons who are not lawful permanent residents or protected individuals, or if physical equipment must be shipped abroad for field testing, the institution must secure an export license prior to disclosure. Applications for dual-use MT items are submitted to BIS via the Simplified Network Application Process Redesign (SNAP-R), while defense items and defense services require DDTC licensing (such as a DSP-5 authorization or Technical Assistance Agreement). Because MT-controlled technologies carry a strong presumption of denial for many foreign destinations, licensing timelines often span several months.

Typical timeline phases

Managing research projects that touch MTCR-derived technologies requires structured oversight across the sponsored project lifecycle. The following compliance phases outline the standard progression for university research:

Phase 1: Pre-Award Assessment and Proposal Review

During the initial proposal phase (typically one to two months prior to submission), the principal investigator (PI) completes an institutional export control screening questionnaire. The sponsored programs office reviews the proposed work scope, identifies any planned foreign national involvement, and verifies whether the funding opportunity announcement contains restrictive clauses. If a sponsor demands publication pre-approval or nationality quotas, contract negotiators seek to remove these terms to preserve the Fundamental Research Exclusion.

Phase 2: Post-Award Setup and Classification

Upon award issuance, the research compliance office conducts a granular technical classification of all deliverables, equipment to be procured, and software to be shared. If the work involves controlled MT items or proprietary vendor technical data, compliance officers draft a formal Technology Control Plan (TCP) within two to four weeks. All project personnel undergo specialized compliance training and sign acknowledgement agreements before entering the laboratory space.

Phase 3: Licensing and Federal Agency Review

If foreign national researchers must access controlled technology that cannot be sheltered under the FRE, or if physical prototypes must be shipped to an international launch site or test range, the university prepares federal license applications. The BIS SNAP-R dual-use licensing process or State Department DDTC review generally spans two to six months, as applications undergo interagency review by the Department of Defense, State Department, and intelligence agencies.

Phase 4: Active Project Execution and Periodic Auditing

Throughout project execution, the compliance office performs annual or semi-annual audits of the laboratory environment. Audits confirm that keycard access logs remain restricted to cleared project personnel, that IT security configurations remain intact, and that no new foreign collaborators have been onboarded without export screening. Any significant change in research scope or experimental equipment requires an immediate classification update.

Phase 5: Project Closeout and Data Archiving

At the conclusion of the research award, the project enters formal closeout. Export-controlled technical data, proprietary design drawings, and simulation models must be securely archived on encrypted, access-restricted institutional servers or permanently sanitized according to sponsor requirements. Controlled physical prototypes must be returned to the sponsor, transferred to another licensed project, or decommissioned. The compliance office officially closes the TCP and retains project compliance documentation for a minimum statutory period of five years.

Common mistakes

University researchers and sponsored research administrators frequently encounter compliance pitfalls when managing missile-relevant and dual-use aerospace technologies. Common compliance errors include:

  • Assuming the Fundamental Research Exclusion Covers Physical Hardware: The most prevalent error in academic research is assuming that the FRE protects physical objects. Under both EAR (15 CFR § 734.8) and ITAR (22 CFR § 120.34), the FRE applies exclusively to information and software resulting from fundamental research. Physical hardware, including sounding rocket airframes, rocket engines, payload fairings, telemetry hardware, and specialized sensors, remains fully subject to export controls regardless of academic intent.
  • Overlooking Deemed Exports in Campus Laboratories: Disclosing controlled technical data or source code (such as design manuals for an MT-controlled turbojet or propulsion test rig) to a foreign national student, postdoc, or visiting scholar within a U.S. university laboratory is legally treated as an export to that individual’s country of citizenship. Failure to identify deemed exports before granting lab access represents a severe regulatory violation.
  • Signing Restrictive Non-Disclosure Agreements (NDAs): PIs frequently sign industry NDAs or vendor terms to acquire commercial rocket components, advanced gyroscopes, or simulation software. If the vendor provides proprietary design data marked as export-controlled, the laboratory must handle that data under a strict TCP; accepting proprietary data destroys the fundamental research defense for that portion of the work.
  • Misclassifying Commercial Unmanned Aerial Vehicles (UAVs): Researchers frequently assume that commercially purchased off-the-shelf drones are entirely unrestricted. However, modifying a commercial UAV with autonomous waypoint navigation software, specialized high-payload gimbals, or extended-range fuel systems can push the platform into MTCR Category II (or even Category I) thresholds, triggering stringent export restrictions.
  • Ignoring “Defense Services” Under ITAR: Providing technical assistance, training, or engineering guidance to a foreign entity or foreign national regarding the design, development, assembly, or testing of a defense article constitutes a “defense service” under ITAR (22 CFR § 120.32). PIs who consult for foreign aerospace institutions or assist international teams in rocket testing can incur severe penalties even if all shared data is unclassified or publicly available.
  • Failing to Recognize “Catch-All” Export Controls: Even if a dual-use component falls under EAR99 (not specifically enumerated on the CCL), exporting or transferring that component with knowledge that it will be used in the design, development, production, or maintenance of missiles in or by designated countries of concern violates EAR Part 744 catch-all provisions.

The Missile Technology Control Regime operates alongside several multilateral export control regimes and international nonproliferation frameworks that collectively regulate the transfer of conventional arms, weapons of mass destruction, and dual-use technologies. The table below outlines how the MTCR compares to these related international regimes:

The data table below compares the primary multilateral export control regimes, their regulatory mandates, and their administrative coordination mechanisms:

Regime Name Established Participating States Target Proliferation Scope Core Control Lists Administrative Structure
Missile Technology Control Regime (MTCR) 1987 35 partners Delivery systems for WMD (rockets, missiles, UAVs) Equipment, Software, and Technology Annex (Cat I and II) Point of Contact in Paris (French MFA); rotating annual Chair
Wassenaar Arrangement (WA) 1996 42 participating states Conventional arms and dual-use goods and technologies Munitions List and Dual-Use Goods and Technologies List Permanent Secretariat based in Vienna, Austria
Nuclear Suppliers Group (NSG) 1974 48 participating states Nuclear weapons and nuclear-related dual-use technologies Guidelines Part 1 (Trigger List) and Part 2 (Dual-Use) Permanent Point of Contact hosted by Japan in Vienna
Australia Group (AG) 1985 43 participating states Chemical and biological weapons proliferation Control lists for chemical precursors, dual-use equipment, pathogens Informal secretariat hosted by Australia in Paris
Hague Code of Conduct (HCoC) 2002 144 subscribing states Transparency and confidence-building for ballistic missiles Pre-launch notifications and annual declarations (no control list) Executive Secretariat hosted by Austria in Vienna

While the MTCR, Wassenaar Arrangement, Nuclear Suppliers Group, and Australia Group each target distinct nonproliferation domains, national export control agencies integrate their respective control lists into unified domestic statutory systems. In the United States, items controlled across these four regimes are codified into the EAR Commerce Control List and the ITAR United States Munitions List. Researchers working on multi-disciplinary engineering projects—such as nuclear propulsion or chemical aerosol dispersal systems—often encounter overlapping compliance obligations spanning multiple regimes simultaneously.

The data table below in the dedicated dataset section provides a detailed comparative mapping of MTCR Annex items against U.S. EAR ECCNs, ITAR USML categories, licensing presumptions, and university research touchpoints.

Frequently asked questions

What is the difference between MTCR Category I and Category II items?

Category I items (Annex Items 1 and 2) represent complete rocket and unmanned aerial vehicle systems capable of delivering a payload of at least 500 kilograms to a range of at least 300 kilometers, along with their major functional subsystems (stages, engines, guidance sets, re-entry vehicles) and production facilities. Transfers of Category I items face an unconditional strong presumption of denial, and transfer of production facilities is strictly prohibited. Category II items (Annex Items 3 to 20) encompass dual-use components, propellants, avionics, navigation instruments, test facilities, and sub-threshold systems, which are reviewed on a case-by-case basis through national export licensing frameworks.

Does the Missile Technology Control Regime apply to university research?

Yes, the MTCR applies directly to university research through domestic export control laws such as the U.S. Export Administration Regulations (EAR, Reason for Control “MT”) and the International Traffic in Arms Regulations (ITAR USML Category IV). While fundamental research that produces openly published scientific results is exempt from export controls under the Fundamental Research Exclusion (FRE), physical laboratory hardware, proprietary vendor data, defense services, and restricted sponsored projects remain fully subject to MTCR-derived export controls.

How does the U.S. government implement MTCR guidelines in federal law?

The United States implements MTCR commitments through two statutory frameworks: the Export Administration Regulations (15 CFR Parts 730-774) administered by the Department of Commerce Bureau of Industry and Security (BIS), where MT-controlled dual-use items are designated on the Commerce Control List with the Reason for Control “MT”; and the International Traffic in Arms Regulations (22 CFR Parts 120-130) administered by the Department of State Directorate of Defense Trade Controls (DDTC), which controls military missiles, rockets, and space launch systems under USML Category IV. Additionally, Section 73 of the Arms Export Control Act provides statutory authority to impose sanctions on foreign entities that engage in MTCR-prohibited transfers.

Does the Fundamental Research Exclusion protect rocket and drone research?

The Fundamental Research Exclusion (NSDD-189; 15 CFR § 734.8; 22 CFR § 120.34) protects only the information and software resulting from basic and applied research conducted at accredited higher education institutions that is intended for broad public dissemination. It does not protect physical rocket hardware, propulsion test stands, wind tunnels, or drone airframes. Furthermore, if a research agreement includes sponsor publication pre-approval clauses or nationality restrictions, the FRE is completely voided, making all project technical data subject to export controls.

A deemed export occurs when export-controlled technical data, source code, or technology is disclosed or visually released to a foreign national who is not a U.S. citizen, lawful permanent resident (green card holder), or protected individual, while that person is located inside the United States. In university research, granting a foreign national graduate student, postdoctoral fellow, or visiting scholar unauthorized access to proprietary MT-controlled design blueprints, rocket motor test software, or ITAR technical data constitutes an illegal deemed export unless authorized by a federal export license.

What is the Hague Code of Conduct and how does it relate to the MTCR?

The Hague Code of Conduct Against Ballistic Missile Proliferation (HCoC), established in November 2002, is an international transparency and confidence-building agreement subscribed to by over 140 countries. Unlike the MTCR, which restricts transfers of technology through export control lists, the HCoC focuses on diplomatic transparency, requiring subscribing states to provide pre-launch notifications of ballistic missile and space launch vehicle launches and submit annual declarations of their ballistic missile policies. The MTCR and HCoC operate as complementary pillars of the international missile nonproliferation architecture.

Sources

  • MTCR Secretariat (French Ministry of Europe and Foreign Affairs) — MTCR Guidelines for Sensitive Missile-Relevant Transfers (https://www.mtcr.info/en/mtcr-guidelines/guidelines-for-transfer), accessed 2026-11-14.
  • MTCR Secretariat (French Ministry of Europe and Foreign Affairs) — MTCR Equipment, Software and Technology Annex (https://www.mtcr.info/en/mtcr-guidelines/equipment-software-and-technology), accessed 2026-11-14.
  • MTCR Secretariat (French Ministry of Europe and Foreign Affairs) — MTCR Partners and Frequently Asked Questions (https://www.mtcr.info/en/partners and https://www.mtcr.info/en/faq), accessed 2026-11-14.
  • U.S. Department of Commerce, Bureau of Industry and Security — 15 CFR Part 742.5: Missile Technology Controls (https://www.ecfr.gov/current/title-15/subtitle-B/chapter-VII/subchapter-C/part-742/section-742.5), accessed 2026-11-14.
  • U.S. Department of Commerce, Bureau of Industry and Security — 15 CFR Part 774, Supplement No. 1: Commerce Control List, Category 9 and Category 7 (https://www.ecfr.gov/current/title-15/subtitle-B/chapter-VII/subchapter-C/part-774), accessed 2026-11-14.
  • U.S. Department of State, Directorate of Defense Trade Controls — 22 CFR Part 121: United States Munitions List, Category IV and Category VIII (https://www.law.cornell.edu/cfr/text/22/121.1), accessed 2026-11-14.
  • Arms Control Association — The Missile Technology Control Regime at a Glance (https://www.armscontrol.org/factsheets/mtcr), accessed 2026-11-14.

Data: MTCR Annex Categories and U.S. Export Control Regulatory Mapping

Comparative mapping of Missile Technology Control Regime (MTCR) Annex technical items against U.S. Export Administration Regulations (EAR) ECCNs, ITAR USML categories, licensing presumptions, and university research touchpoints, compiled from official MTCR Guidelines, 15 CFR Part 774, and 22 CFR Part 121.

Period covered: 2026. Coverage: International, United States.

MTCR Annex Categories and U.S. Export Control Regulatory Mapping
MTCR Annex ItemRegime CategoryU.S. Export JurisdictionPrimary ECCN or USML CategoryLicensing PresumptionUniversity Research Touchpoint
Item 1: Complete Delivery Systems (500kg/300km)Category IITAR / EARUSML Cat IV / ECCN 9A104Strong presumption of denialSounding rockets, suborbital scientific launches, high-payload research UAVs
Item 2: Complete Rocket Subsystems and StagesCategory IITAR / EARUSML Cat IV / ECCN 9A106Strong presumption of denialSolid/liquid rocket motor development, thrust vectoring, guidance integration
Item 3: Propulsion Components and SubsystemsCategory IIEAR / ITARECCN 9A101 / USML Cat IVCase-by-case reviewSmall turbojets, turbofans, ramjet/scramjet test articles, turbopumps
Item 4: Propellants and Chemical PrecursorsCategory IIEAR / ITARECCN 1C111 / USML Cat VCase-by-case reviewHydroxyl-terminated polybutadiene (HTPB), ammonium perchlorate, composite fuel testing
Item 6: Composite Structures and ResinsCategory IIEARECCN 9A110 / 1A102Case-by-case reviewCarbon-fiber rocket motor cases, structural interstages, heat-resistant nosecones
Item 9: Navigation and Direction FindingCategory IIEAR / ITARECCN 7A101-7A103 / USML Cat XIICase-by-case reviewInertial measurement units (IMUs), ring laser gyros, precision accelerometers
Item 10: Flight Control and Actuation SystemsCategory IIEARECCN 7A116 / 9A106Case-by-case reviewAutonomous flight control algorithms, fly-by-wire servos, aerodynamic control vanes
Item 11: Avionics and Telemetry EquipmentCategory IIEARECCN 7A105 / 9A115Case-by-case reviewRadar altimeters, GPS receivers designed for high dynamics, telemetry transmitters
Item 15: Test Facilities and Wind TunnelsCategory IIEARECCN 9B105 / 9B106Case-by-case reviewSupersonic/hypersonic wind tunnels, rocket motor static test stands, vibration tables
Item 16: Modeling and Simulation SoftwareCategory IIEARECCN 9D101 / 9D103Case-by-case reviewTrajectory optimization code, computational fluid dynamics (CFD) for missile aerodynamics

Sources

Compiled by CASRAI from the sources above. Free to reuse under CC BY 4.0 with attribution.

Follow CASRAI

Research-administration guidance, standards updates and independent tool reviews.

Ask CASRAI · free to try

Ask about Missile Technology Control Regime (MTCR) Guide

2 free questions a day, no account.

An AI assistant for research: funder rules, compliance, methods and publishing. It links the sources behind its answers and labels answers that come from a web search.

Answers draw on CASRAI's guides and dictionary plus the federal and funder documents we index: Federal Register, Grants.gov, Regulations.gov and UKRI.

Works on this site and inside Claude, Cursor and the AI tools you already use.

Everything CASRAI publishes — this page, the dictionary, the guides and the news — stays open to read, with no account and no card.

Referenced across the research world

University of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logoUniversity of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logo
  • University of Cambridge logo
  • Columbia University logo
  • Crossref logo
  • University of Edinburgh logo
  • Harvard University logo
  • University of Oxford logo
  • Princeton University logo
  • Stanford School of Medicine logo
  • University College London logo
  • ORCID logo

View CASRAI adoption →