Written and maintained by CASRAI Editorial Board
Published · Last updated
On this page
General product information, not medical advice. This page explains how pacifier size labels work; it does not advise on any individual child.
Pacifier size numbers are set by each manufacturer, not by US federal law. The size chart below is one manufacturer’s published scheme (BIBS), and the federal rule for pacifiers (16 CFR Part 1511) has no age or size classes, so the same number can mean a different nipple from brand to brand.
Pacifier size chart (BIBS)
BIBS states that all of its sizes can be introduced from birth and that age and size indications are only a guide. Its recommendations:
| BIBS size | Age label | Round-nipple lines and materials named in the guide |
|---|---|---|
| Size 1 | 0+ months | Colour (natural rubber latex), Boheme (natural rubber latex), De Lux (natural rubber latex) |
| Size 2 | 6+ months | Colour (natural rubber latex), Boheme (natural rubber latex), De Lux (natural rubber latex) |
| Size 3 | 18+ months | Colour (natural rubber latex) |
| Onesize | 0+ months | De Lux (silicone) |
Source: BIBS, Pacifier Size Guide, https://us.bibsworld.com/blogs/guides/pacifier-size-guide, checked 2026-10-30. Check your product’s labelling: the pack, not a chart on a web page, tells you what size and material you actually have.
How to read a pacifier size label
The age on a pacifier label is a manufacturer’s suggestion, written as a start point (“6+ months”), not a safety limit. In the BIBS guide the numbers 1, 2 and 3 step up with the “+ months” figure, and “Onesize” is a single size within a line. Read the label on the product in your hand, because the pack shows the size and age range for that product.
How to know pacifier size
The manufacturer’s answer is to start from the age label and then see what the child accepts. BIBS says babies have different needs and preferences, recommends trying different shapes and sizes to find the right fit, and notes that most newborns prefer a smaller size. That is a preference observation, not a measurement rule: the BIBS guide gives no body-measurement rule for choosing a size.
What size pacifier for a newborn?
BIBS labels Size 1 and Onesize as 0+ months and says all sizes can be introduced from birth, while most newborns prefer a smaller size. Other brands number their sizes differently, so check that brand’s own label.
Size labels versus the federal rule (16 CFR 1511)
In the United States a pacifier must meet 16 CFR Part 1511, a Consumer Product Safety Commission rule. Section 1511.3 sets two requirements that are not tied to a size number:
- Pull-through test: a tensile force rising gradually to, but not exceeding, 2.0 pounds (8.9 newtons) within 5 seconds, then held for a further 10 seconds. A pacifier that can be completely drawn through the opening of the test fixture fails.
- Ventilation holes: the guard or shield must have at least two symmetrically located holes, each at least 0.20 inches (5 millimeters) in minor dimension, with no hole edge closer than 0.20 inches (5 millimeters) to the perimeter of the guard or shield.
Section 1511.2 defines a pacifier, the guard or shield at the base of the nipple (which keeps the pacifier from being completely drawn into the child’s mouth) and the handle or ring. The full set of tests is covered in Pacifier Safety: What 16 CFR 1511 Requires. Source: 16 CFR 1511.3 and 16 CFR 1511.2 (Cornell LII), checked 2026-10-30.
Common mix-ups
- Size number versus age: “Size 2” means the manufacturer’s second tier, not a standard 6-month pacifier. Another brand’s Size 2 can carry a different age label.
- Age label versus safety rule: a “0+ months” label is not a federal classification. The tests in 1511.3 do not change with the number printed on the pack.
- Size versus material and shape: in the BIBS guide, availability by size depends on the product line and material. Colour is listed in natural rubber latex in sizes 1 to 3, while the silicone De Lux is listed as Onesize. For what a latex label means on another product, see latex allergy and glove materials.
- Pacifier size versus other infant-product sizing: other products follow their own conventions, for example breast pump flange sizes.
What are the different types of pacifiers?
The BIBS guide groups its pacifiers by nipple shape (round, anatomical and symmetrical) and by material (natural rubber latex and silicone). Under 16 CFR 1511.2 all of these are pacifiers: an article with a nipple that a young child sucks on but that is not designed to give fluid, usually with a guard or shield and a handle or ring. The types differ in shape, material and size label, not in the federal requirements above.
FAQ
How to know pacifier size?
Read the age and size on the pack: the manufacturer’s “+ months” label is the starting point. BIBS adds that these are only a guide and that trying different shapes and sizes is how to find a fit.
Does pacifier size matter?
Size matters for fit and preference, according to the manufacturer. The federal tests (pull-through force and ventilation holes) apply to every pacifier sold in the US regardless of its size label. Questions about an individual child belong with a paediatric clinician.
What are the different types of pacifiers?
By BIBS’s grouping: round, anatomical or symmetrical nipples, in natural rubber latex or silicone. See the types section above.
Sources
- BIBS, Pacifier Size Guide, https://us.bibsworld.com/blogs/guides/pacifier-size-guide, checked 2026-10-30.
- 16 CFR 1511.3 and 1511.2, Cornell Legal Information Institute, https://www.law.cornell.edu/cfr/text/16/1511.3 and https://www.law.cornell.edu/cfr/text/16/1511.2, checked 2026-10-30.







