Skip to main content
v2026.11,986 entries · CC-BY 4.0

Physiological Reports: Diagnostic Standards, Scope, and Publishing Guide

A complete guide to physiological reports: clinical diagnostic standards, homeostatic testing protocols, and the Physiological Reports open-access journal.

Written and maintained by CASRAI Editorial Board

Published

On this page

Physiological reports encompass two distinct domains in biomedical science: structured clinical and laboratory documentation recording the functional, homeostatic performance of living organ systems, and Physiological Reports, the peer-reviewed gold open-access scientific journal co-owned by the American Physiological Society and The Physiological Society. In clinical diagnostics and laboratory operations, physiological reports translate continuous biophysical signals—including cardiac electrophysiology, respiratory volumes, and neural conduction velocities—into standardized diagnostic summaries benchmarked against normative reference populations. In scholarly publishing, Physiological Reports provides a dedicated society-governed venue for original research across basic, translational, and clinical physiology, operating a collaborative cascade review model alongside flagship titles like The Journal of Physiology and the American Journal of Physiology.

Definition and Scope of Physiological Reports

The term physiological refers to the biological science concerned with the normal functions, mechanisms, and processes of living organisms, tissues, and cells. Understanding physiological reporting requires distinguishing physiological function from anatomy and pathology. While anatomy delineates static structural architecture, and pathology examines lesions and tissue injury, physiology examines dynamic operational mechanics: transport kinetics, bioelectric conduction, metabolic feedback loops, gas exchange, and hormonal regulation.

In operational laboratories and clinical testing facilities, a physiological report documents functional bio-measurements acquired under defined baseline, stress, or experimental conditions. Unlike qualitative clinical notes, a physiological report captures raw biosignals via calibrated transducers, applies validated signal processing, and presents parameters alongside normative thresholds, typically expressed as percent-predicted values, z-scores, or lower limits of normal (LLN).

The operational scope of physiological reporting extends across respiratory physiology, cardiology, clinical neurophysiology, nephrology, and exercise science, serving as the evidentiary bridge between raw sensor data and diagnostic clinical decisions. Researchers interested in how normal physiological regulation contrasts with morphological disease can examine our comparative analysis of pathology vs physiology for an in-depth breakdown of structural versus functional disease paradigms.

What Physiological Means in Simple Terms

In simple terms, physiological describes how living bodies and their internal parts perform their daily survival work. If the human body is viewed as a biological vehicle, anatomy maps the physical components—the heart muscle, blood vessels, lungs, and nerves. Physiology describes how the engine runs: how the heart generates electrical impulses to pump blood, how lungs exchange gases, how kidneys filter waste while conserving electrolytes, and how hormones regulate blood glucose within a narrow homeostatic window.

A measurement is termed physiological when it reflects an active life process rather than a static physical dimension. For example, measuring arterial diameter via ultrasound is an anatomical assessment, whereas measuring arterial blood flow velocity, endothelial vasodilation, and vascular compliance represents a physiological assessment reflecting real-time adaptive responses to metabolic demands or external stressors.

In biomedical research, physiological conditions refer to experimental environments designed to replicate internal bodily conditions accurately. Cell culture laboratories and in vitro assay protocols must maintain physiological temperature (37.0 degrees Celsius for human tissue), physiological pH (7.35 to 7.45), physiological osmolarity (280 to 295 mOsm/kg), and physiological oxygen tension to ensure biological models remain valid and reproducible.

Examples of Physiological Diseases and Functional Malfunctions

A physiological disease—frequently designated as a functional disorder—occurs when an internal biological mechanism, regulatory feedback loop, or organ system malfunctions without an initial macroscopic structural defect or pathogen. Unlike infectious illnesses, physiological diseases arise from internal dysregulation of biochemical signaling cascades, receptor sensitivities, enzymatic pathways, or neuromuscular excitation-contraction coupling.

According to World Health Organization epidemiological surveillance, chronic physiological diseases represent leading causes of global morbidity and mortality. Key representative examples across major biological systems include:

  • Hypertension (Essential High Blood Pressure): A chronic physiological disorder of the cardiovascular system characterized by persistent elevation of systemic arterial pressure. The World Health Organization estimates that 1.4 billion adults aged 30 to 79 worldwide lived with hypertension in 2024 (33 percent of that global cohort), driven by dysregulated vascular smooth muscle tone, autonomic hyperactivity, and altered renal sodium handling.
  • Type 2 Diabetes Mellitus: An endocrine and metabolic disease involving progressive failure of pancreatic beta-cell insulin secretion coupled with peripheral insulin resistance in skeletal muscle, adipose tissue, and liver. World Health Organization surveillance documents that diabetes prevalence surged from 200 million individuals in 1990 to over 830 million in 2022, exemplifying homeostatic glucose clearance failure.
  • Asthma: A physiological disorder of the respiratory system defined by chronic airway hyperresponsiveness, smooth muscle bronchospasm, and mucosal secretions. When triggered, the mechanism governing airway caliber fails, producing airflow limitation that manifests as wheezing, dyspnea, and reduced forced expiratory volume.
  • Cardiac Arrhythmias: Electrophysiological disorders where the normal cardiac conduction cascade breaks down, generating tachycardias, bradycardias, or fibrillations. Specialized safety protocols such as the hERG assay are routinely deployed in pharmacology laboratories to screen drug candidates for cardiotoxic prolongation of physiological cardiac repolarization.
  • Primary Acid-Base Imbalances: Systemic physiological disturbances where renal tubular bicarbonate reclamation or pulmonary carbon dioxide elimination fails, driving arterial pH outside the viable homeostatic range of 7.35 to 7.45.

How Physiological Reports Are Generated in Laboratory and Clinical Practice

Generating an accurate physiological report requires a structured technical workflow designed to preserve signal fidelity, eliminate environmental artifact, and contextualize numerical findings against established biological standards. The standardized laboratory process follows seven operational steps:

  1. Subject Preparation and Pre-Test Calibration: Patient or animal factors influencing physiological variables are systematically controlled, including avoiding strenuous exercise, caffeine, or bronchodilators before testing. Transducers undergo daily physical calibration using precision calibration syringes, standard reference voltages, or certified reference gases.
  2. Environmental Correction: Gas volumes and respiratory parameters are mathematically converted to account for ambient conditions. Diagnostic spirometers measure air under Ambient Temperature and Pressure, Saturated (ATPS) conditions and automatically convert values to Body Temperature, Ambient Pressure, Saturated (BTPS) conditions (37 degrees Celsius, prevailing atmospheric pressure, 100 percent relative humidity).
  3. Electrode Placement and Biosignal Acquisition: Transducers and bioelectrodes are applied strictly according to international standard placement systems, such as the International 10-20 system for electroencephalography (EEG) or standard 12-lead anatomical landmarks for electrocardiography (ECG). Contact impedance is verified below 5 kOhms for neurophysiology to optimize signal quality.
  4. Signal Amplification and Hardware Filtering: High-impedance differential bioamplifiers amplify microvolt-level and millivolt-level physiological potentials while rejecting common-mode noise. Analog and digital filtering protocols suppress high-frequency muscle artifact, mains interference, and baseline sway without distorting fundamental waveform morphology.
  5. Verification of Test Acceptability and Repeatability: Clinical laboratory guidelines require immediate automated and manual quality checks. For pulmonary function reports, international technical standards mandate that a patient perform at least three acceptable forced expiratory maneuvers, with the two highest Forced Vital Capacity (FVC) and Forced Expiratory Volume in 1 second (FEV1) values agreeing within 150 milliliters.
  6. Quantitative Parameter Derivation and Reference Benchmarking: Automated diagnostic software extracts key morphological, amplitude, and timing parameters. Values are compared against multi-ethnic reference equations (such as Global Lung Function Initiative reference models or age-stratified nerve conduction norms) to compute z-scores and lower limits of normal (LLN).
  7. Specialist Clinical or Scientific Interpretation: The physiological report concludes with a structured narrative interpretation authored by a qualified clinical physiologist, pulmonologist, cardiologist, or neurologist who synthesizes numerical deviations, comments on test technical quality, correlates findings with clinical history, and issues a formal diagnostic classification.

Types of Physiological Reports and Diagnostic Categories

In medical centers, clinical physiology laboratories, and preclinical animal research facilities, physiological reports are categorized according to the organ system evaluated and the physical transduction technology employed. Each diagnostic category relies on established professional society standards to govern acquisition protocols, report layout, and interpretive terminology.

The following table outlines the primary categories of clinical and laboratory physiological reports, their core measured parameters, standard reference frameworks, and professional oversight bodies:

Report Category Diagnostic Modality Core Physiological Parameters Reference Standards & Guidelines Professional Oversight Body
Pulmonary Physiology Spirometry & Plethysmography FVC, FEV1, FEV1/FVC ratio, TLC, RV, DLCO ATS/ERS Joint Technical Standards; GLI equations American Thoracic Society / European Respiratory Society
Cardiac Electrophysiology 12-Lead Electrocardiography (ECG) Heart rate, PR interval, QRS duration, QT/QTc interval, ST deviation AHA/ACC/HRS Recommendations for the Standardization of the ECG American Heart Association / American College of Cardiology
Clinical Neurophysiology Electroencephalography (EEG) Background rhythm (alpha/theta/delta), epileptiform discharges, symmetry ACNS Guidelines for EEG Reporting; Technical Standard 1 American Clinical Neurophysiology Society
Neuromuscular Physiology Electromyography & Nerve Conduction (EMG/NCS) Compound muscle action potential (CMAP) amplitude, latency, velocity AANEM Recommended Practice Guidelines for Nerve Conduction Studies American Association of Neuromuscular & Electrodiagnostic Medicine
Exercise & Metabolic Physiology Cardiopulmonary Exercise Testing (CPET) Peak VO2, VCO2, respiratory exchange ratio (RER), VE/VCO2 slope, AT AHA Scientific Statement on CPET Standardization American Heart Association / European Society of Cardiology
Vascular Hemodynamics Arterial Duplex & Plethysmography Ankle-brachial index (ABI), peak systolic velocity, waveform resistivity Intersocietal Accreditation Commission (IAC) Vascular Standards IAC / Society for Vascular Medicine

Beyond specialized clinical test documentation, biomedical researchers investigating cognitive, affective, and neuroendocrine physiology synthesize behavioral observations with autonomic telemetry. For an exploration of experimental methodologies linking behavior with physiological readouts, see our overview of the Physiology & Behavior journal.

Physiological Reports: The Scientific Journal

Beyond clinical laboratory diagnostic sheets, Physiological Reports is widely recognized across biomedical academia as a major peer-reviewed scientific journal. Launched in 2013, the journal was established as a joint publishing collaboration between two leading physiological organizations: the American Physiological Society (APS, founded in 1887) and The Physiological Society (UK, founded in 1876). The serial is published on their behalf by John Wiley & Sons, Inc. under Electronic ISSN 2051-817X.

The mission of Physiological Reports is to provide an accessible, rigorous home for research articles across all areas of basic, translational, and clinical physiology, spanning cellular, tissue, organ-level, and whole-body integrative biological systems. According to the National Library of Medicine Catalog (NLM ID: 101607800), the journal is fully indexed in MEDLINE, PubMed, and PubMed Central (PMC), ensuring maximum international visibility and permanent digital archiving for all published findings.

A central feature of Physiological Reports is its collaborative cascade manuscript transfer workflow. Authors who submit original manuscripts to flagship society journals—such as the American Journal of Physiology series, The Journal of Physiology, or Experimental Physiology—that receive positive peer reviews but cannot be accommodated due to extreme selectivity can seamlessly transfer their manuscript, reviewer comments, and editor feedback to Physiological Reports without restarting the review process from scratch. This society-led cascade model accelerates publishing turnaround times, reduces redundant reviewer burden, and preserves rigorous peer review integrity.

What Is the Impact Factor of Physiological Reports?

The Journal Impact Factor (JIF) of Physiological Reports is 2.1, as recorded in Clarivate’s Journal Citation Reports within the Web of Science Core Collection under the Emerging Sources Citation Index (ESCI). The journal also maintains a Scopus CiteScore of approximately 3.7 and an h5-index reflecting substantial citation volume across basic biology and clinical research.

While an impact factor of 2.1 places Physiological Reports in the solid core of general physiological literature, understanding the journal’s citation profile requires evaluating its distinct editorial mandate. Unlike elite review periodicals that curate heavily cited synthesis articles, Physiological Reports operates as an empirical primary research journal. Its primary objective is publishing technically sound, hypothesis-driven primary research, confirmatory findings, well-designed negative results, and methodological reports that advance specialized sub-disciplines.

As a Gold Open Access journal, Physiological Reports publishes all articles under Creative Commons licenses (primarily CC BY or CC BY-NC), enabling unrestricted global reuse and immediate access without subscription paywalls. Authors submitting to open-access titles navigate various publishing models; researchers interested in how hybrid versus open archiving policies function across modern publishing houses can read our analysis of bronze open access for comparative definitions of non-standard access tiers.

What Are the Best Journals in Physiology?

The physiological literature spans more than a century of scientific publishing, anchored by historical society flagships, high-impact review vehicles, and modern open-access megajournals. When evaluating the best journals in physiology, researchers and academic departments assess a combination of editorial heritage, selective peer-review stringency, citation velocity, and disciplinary authority.

The undisputed elite tier of physiological science publishing includes:

  • Physiological Reviews (American Physiological Society): Widely recognized as the premier journal in physiological sciences, boasting a Journal Impact Factor that consistently exceeds 30.0. The journal exclusively publishes comprehensive, invited review articles synthesizing cellular, organ-system, and translational physiology.
  • The Journal of Physiology (The Physiological Society / Wiley): Founded in 1878 by Michael Foster, this is the historic cornerstone of physiological publishing, publishing foundational discoveries in neuromuscular transmission, cellular ion channels, and cardiac electrophysiology.
  • American Journal of Physiology (AJP) Series (American Physiological Society): Established in 1898, the AJP family is divided into specialized subject-specific journals, including AJP-Heart and Circulatory Physiology, AJP-Endocrinology and Metabolism, AJP-Renal Physiology, and AJP-Cell Physiology.
  • Annual Review of Physiology (Annual Reviews): An authoritative annual volume delivering high-impact state-of-the-art syntheses of major breakthroughs across cardiovascular, neurobiological, comparative, and renal physiology.
  • Journal of Applied Physiology (American Physiological Society): The leading venue for integrative and environmental physiology, publishing landmark papers on exercise mechanics, hypoxia, thermal regulation, and aerospace physiological adaptation.
  • Frontiers in Physiology (Frontiers Media): A high-volume, broad-scope open-access journal that has grown into one of the most visible modern outlets in the field. Authors considering open-access venues can examine our comprehensive guide to Frontiers in Physiology to evaluate its interactive review model, indexing, and publication fees.

To provide researchers and library acquisition committees with an objective reference, the data table below compares the foundational characteristics, sponsoring societies, commercial publishers, launch dates, and access models across leading physiology serials.

Common Misunderstandings About Physiological Reports and Data

Misinterpretations surrounding physiological reports arise in both clinical diagnostic settings and academic publishing environments. Addressing these common misconceptions helps laboratory personnel, clinicians, and researchers handle physiological data with greater precision:

  • Confusing Normal Reference Ranges with Definitive Clinical Diagnoses: A physiological report documents functional parameters and compares them to statistical population percentiles; it does not constitute a standalone medical diagnosis. A value slightly below the lower limit of normal may reflect transient biological variation rather than disease, requiring clinical correlation.
  • Equating Journal Impact Factor with Individual Article Scientific Rigor: In academic publishing, authors occasionally assume that an impact factor of 2.1 in Physiological Reports signifies lower research quality. Journal metrics reflect journal-level citation distributions; a rigorous, reproducible experimental paper in Physiological Reports often carries greater long-term scientific value than a sensationalized finding in a higher-tier outlet.
  • Overlooking Environmental and Postural Calibration Factors: In laboratory physiology testing, measurements are highly sensitive to body posture, ambient temperature, humidity, and circadian timing. Assuming that raw physiological data can be directly compared without verifying calibration logs and BTPS conversions leads to flawed clinical decisions and unreproducible experimental data.
  • Assuming All Open-Access Physiology Journals Follow Identical Standards: The open-access landscape contains significant variance in peer-review rigor. Society-backed journals like Physiological Reports operate under strict ethical oversight and academic governance of The Physiological Society and APS, distinguishing them from non-selective commercial publishing models.

Frequently asked questions

What does physiological mean in simple terms?

In simple terms, physiological means related to how living bodies and their internal organs perform their normal functions and life-sustaining processes. While anatomy focuses on the physical structure and parts of an organism, physiology focuses on how those parts work together dynamically—such as how the heart pumps blood, how the lungs exchange oxygen, and how metabolic hormones balance cellular energy.

What are some examples of physiological diseases?

Examples of physiological diseases include chronic conditions where an internal organ system or biological process malfunctions rather than being damaged by an external pathogen or trauma. Major examples include hypertension (chronic cardiovascular dysregulation of arterial blood pressure), type 2 diabetes (endocrine failure of insulin secretion and glucose regulation), asthma (chronic respiratory airway hyperresponsiveness), and cardiac arrhythmias (electrophysiological conduction disorders).

What is the impact factor of physiological reports?

The Journal Impact Factor of the scientific journal Physiological Reports is 2.1, according to Clarivate’s Journal Citation Reports within the Web of Science Core Collection (Emerging Sources Citation Index). The journal also holds a Scopus CiteScore of approximately 3.7, reflecting consistent citation activity across basic and translational biomedical research.

What are the best journals in physiology?

The top scientific journals in physiology include Physiological Reviews (the highest-impact review journal in the field, published by the American Physiological Society), The Journal of Physiology (the historic primary research flagship published by The Physiological Society since 1878), the American Journal of Physiology series (including specialized titles in heart, renal, and cell physiology), the Annual Review of Physiology, and the Journal of Applied Physiology.

Sources

Data: Physiology Journals Scope, Metrics, and Publishing Models Comparison

Comparative dataset of leading peer-reviewed physiology journals detailing sponsoring societies, commercial publishers, launch year, open-access status, and indexing profiles compiled from NLM Catalog and Clarivate records.

Period covered: 1878/2026. Coverage: Global.

Physiology Journals Scope, Metrics, and Publishing Models Comparison
Journal NameSponsoring SocietyCommercial PublisherLaunch YearAccess ModelJournal Impact Factor
Physiological ReportsAmerican Physiological Society and The Physiological SocietyWiley2013Gold Open Access2.1
Physiological ReviewsAmerican Physiological SocietyAmerican Physiological Society1898Hybrid Subscription33.6
The Journal of PhysiologyThe Physiological SocietyWiley1878Hybrid Subscription4.7
Journal of Applied PhysiologyAmerican Physiological SocietyAmerican Physiological Society1948Hybrid Subscription3.3
Frontiers in PhysiologyNone (Independent)Frontiers Media2010Gold Open Access3.2

Sources

Compiled by CASRAI from the sources above. Free to reuse under CC BY 4.0 with attribution.

Follow CASRAI

Research-administration guidance, standards updates and independent tool reviews.

Ask CASRAI · free to try

Ask about Physiological Reports: Diagnostic Standards, Scope, and Publishing Guide

2 free questions a day, no account.

An AI assistant for research: funder rules, compliance, methods and publishing. It links the sources behind its answers and labels answers that come from a web search.

Answers draw on CASRAI's guides and dictionary plus the federal and funder documents we index: Federal Register, Grants.gov, Regulations.gov and UKRI.

Works on this site and inside Claude, Cursor and the AI tools you already use.

Everything CASRAI publishes — this page, the dictionary, the guides and the news — stays open to read, with no account and no card.

Referenced across the research world

University of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logoUniversity of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logo
  • University of Cambridge logo
  • Columbia University logo
  • Crossref logo
  • University of Edinburgh logo
  • Harvard University logo
  • University of Oxford logo
  • Princeton University logo
  • Stanford School of Medicine logo
  • University College London logo
  • ORCID logo

View CASRAI adoption →