Written and maintained by CASRAI Editorial Board
Published · Last updated
On this page
A pituitary rongeur is a hand-held bone-biting instrument sold under a catalog heading that pairs it with intervertebral disc (IVD) rongeurs. It is a catalog name, not a separate FDA device type. This page is for clinic staff, buyers and students who need to read a listing and place the instrument in its regulatory category.
This page describes products and general use; it is not medical advice.
What a pituitary rongeur is
A pituitary rongeur is a small-jaw rongeur: a manually operated instrument for cutting or biting bone. Teleflex lists its Cushing rongeurs under the category label “IVD / Pituitary Rongeurs”, so the two names describe one catalog group rather than two different instruments.
FDA classification: the catalog name versus the regulation name
FDA does not list “pituitary rongeur” as its own device name. A manually operated rongeur falls under 21 CFR 882.4840, “Manual rongeur”, defined as “a manually operated instrument used for cutting or biting bone”. It is Class II (performance standards). A powered counterpart is covered separately by 21 CFR 882.4845, “Powered rongeur”, defined as “a powered instrument used for cutting or biting bone”, also Class II (performance standards). Both regulations were checked in the eCFR on 2026-10-30, and both limit the instrument to surgery involving the skull or spinal column.
How it is built
Teleflex describes its Ferris-Smith IVD rongeurs as having a ring handle (“Ring handle lessens chance of slippage”) and handle style VI. The working end is a pair of jaws, specified by width and length in millimetres, and the distal end is offered straight, angled upward or angled downward.
Types and variants
| Family (Teleflex) | Distal styles listed | Items in listing | Key difference |
|---|---|---|---|
| Cushing IVD rongeurs | Straight, angled upward, angled downward | 6 | One jaw size (2.0 x 10.0 mm) in two overall lengths |
| Ferris-Smith IVD rongeurs | Straight, angled upward, angled downward | 9 | Three jaw sizes at one overall length; ring handle |
Sizes and specifications that matter
| Family | Jaw width x length | Overall length |
|---|---|---|
| Cushing IVD rongeur | 2.0 x 10.0 mm | 7 1/8 in (18.0 cm) or 4 7/8 in (12.5 cm) |
| Ferris-Smith IVD rongeur | 3.0 x 10.0 mm, 4.0 x 10.0 mm, 6.0 x 12.0 mm | 7 in (18.0 cm) |
Source: Teleflex product listings for Cushing and Ferris-Smith IVD rongeurs, checked 2026-10-30. Other manufacturers’ catalogs may list different sizes.
How to read a listing
The Teleflex listings direct readers to the Instructions for Use (IFU) for “a complete listing of the indications, contraindications, warnings, and precautions”, and state that the information in the listing “is not a substitute for the product Instructions for Use”. The IFU and the operating surgeon govern which instrument, size and angle is appropriate. This page does not recommend a size or angle for any procedure.
When comparing listings, read three things: the jaw width x length, the overall length, and the distal style. Those are the fields the manufacturer publishes for these families.
Use and handling
Use, cleaning and reprocessing follow the manufacturer’s IFU for the specific instrument. Teleflex’s listings state that the IFU holds the complete warnings and precautions.
Common mistakes
- Treating “pituitary rongeur” as a distinct FDA product type; the regulation names are manual rongeur and powered rongeur.
- Reading a catalog heading as a statement of what a size is meant for; the listings point to the IFU for indications.
- Comparing only jaw width and ignoring jaw length and overall length, which the listings give as separate figures.
FAQ
Is a pituitary rongeur the same as an IVD rongeur?
Teleflex groups them in one category, “IVD / Pituitary Rongeurs”, for its Cushing rongeurs. Whether another manufacturer uses the names the same way depends on that manufacturer’s catalog.
What FDA class is a pituitary rongeur?
A manually operated rongeur is Class II (performance standards) under 21 CFR 882.4840; a powered rongeur is Class II (performance standards) under 21 CFR 882.4845.
What sizes do pituitary-style rongeurs come in?
In the two Teleflex families above, jaws range from 2.0 x 10.0 mm to 6.0 x 12.0 mm, with overall lengths of 4 7/8 in (12.5 cm) to 7 1/8 in (18.0 cm).
Related guides
Compare with the Kerrison rongeur, bone rongeur, Leksell rongeur and Lempert rongeur, or see the wider overview of neurosurgical instruments. Medical-supply catalogs list related forceps.
Sources
- eCFR, 21 CFR 882.4840 Manual rongeur: https://www.ecfr.gov/current/title-21/section-882.4840 (checked 2026-10-30)
- eCFR, 21 CFR 882.4845 Powered rongeur: https://www.ecfr.gov/current/title-21/section-882.4845 (checked 2026-10-30)
- Teleflex, Cushing IVD Rongeurs: https://us.myteleflex.com/All-Categories/Surgical-Instruments/Orthopedic/Cushing-IVD-Rongeurs/p/su-CushingIVDRongeurs (checked 2026-10-30)
- Teleflex, Ferris-Smith IVD Rongeurs: https://ca.myteleflex.com/All-Categories/Surgical-Instruments/Orthopedic/Ferris-Smith-IVD-Rongeurs/p/su-Ferris-SmithIVDRongeurs (checked 2026-10-30)







