Written and maintained by CASRAI Editorial Board
Published · Last updated
On this page
General product and regulatory information for lab, clinic and supply staff. It is not medical advice and does not describe how to perform any surgical procedure.
Short answer
A rib shear is a hand-held surgical instrument used to cut ribs in chest surgery. The Red Cross items catalogue defines its Giertz rib shear in one line: “Used to cut the ribs in chest surgery.” Rib shears come in named patterns (Giertz, Tudor Edwards, Brunner), and the 21 CFR 878.4800 regulation for manual surgical instruments does not list them by name.
Definition and scope
A rib shear (also written rib shears, or called a rib cutter) is a manual cutting instrument for bone. Surgical Holdings, a UK instrument supplier, describes its cardiothoracic rib shears as used “to open chest cavities and cut the bones in cardiothoracic procedures.” The Red Cross catalogue entry “SHEAR, RIB, GIERTZ, 25cm” gives the intended use as cutting ribs in chest surgery.
The instrument belongs to the broader group of hand instruments covered in surgical instruments names and pictures and orthopedic surgical instruments. It is a cutter, which sets it apart from clamps (see types of surgical clamps) and from powered bone saws such as the cast saw, which cuts casts rather than ribs.
How rib shears are used in practice
The Red Cross and Surgical Holdings entries both place the instrument in chest (cardiothoracic) surgery, where ribs are cut to open or access the chest cavity. It is operated by surgical staff under the manufacturer’s instructions for use and the hospital’s own training. This page gives no technique or step list. Within cardiovascular instruments, rib shears are a bone-cutting tool rather than a vascular one.
Named rib shear patterns
Instrument makers name rib shears after the surgeons who designed them. The table lists what the Red Cross catalogue and the suppliers state for each pattern.
| Pattern | What the source states | Source |
|---|---|---|
| Giertz | Listed as a rib shear type; catalogue item “SHEAR, RIB, GIERTZ, 25cm”; intended use “to cut the ribs in chest surgery”; material “martensitic steel (quenched, magnetic steel)” | Surgical Holdings; Red Cross items catalogue |
| Tudor Edwards, anterior | Listed as a rib shear type | Surgical Holdings |
| Tudor Edwards, posterior | Listed as a rib shear type | Surgical Holdings |
| Brunner | Hook-shaped blade, blunt tips, compound-action joint, stainless steel satin finish, described as able to be sterilized and reused, CE marking listed, left and right versions | Xelpov Surgical product page |
Surgical Holdings states that its stainless steel rib shears are manufactured in accordance with BS 5194, a British Standard. The anterior and posterior Tudor Edwards entries are the only difference the supplier lists for that pattern; any further distinction should come from the maker’s own product documentation.
Where it matters for labs, clinics and supply decisions
How the US regulation treats it
21 CFR 878.4800 defines a manual surgical instrument for general use as “a nonpowered, hand-held, or hand manipulated device.” It classifies these as Class I (general controls) and exempts them from premarket notification under 21 CFR 807 subpart E, subject to the limitations in 21 CFR 878.9. The regulation’s list of examples names a cutter, chisel, osteotome, saw and retractor, among others. It does not name rib shears, a rib cutter or a costotome.
FDA’s product classification database has a generic entry “Cutter, Surgical” (product code FZT, Class 1, 21 CFR 878.4800). A particular rib shear’s classification therefore depends on how its maker lists it, and should be taken from the maker’s regulatory documentation rather than assumed from the instrument’s name.
A checklist built from the sources
The details below are the kinds of information makers and catalogues publish for rib shears. They make a practical comparison list when reading any maker’s specification sheet.
- Pattern name and length. The Red Cross item names pattern and length together (Giertz, 25 cm).
- Material. The Red Cross item specifies martensitic steel (quenched, magnetic steel); Surgical Holdings and Xelpov state stainless steel.
- Standard cited. Surgical Holdings cites BS 5194.
- Reuse statement. Xelpov states the Brunner shear can be sterilized and reused.
- Marking. Xelpov lists CE marking for the Brunner shear.
- Packaging. The Red Cross item is packed individually, with the designation and the supplier’s or manufacturer’s name and address shown on the packaging.
- Handedness. Xelpov lists left and right versions of the Brunner shear.
- Internal consistency. The Xelpov page gives 24.5 cm in its description text and 32 cm in its specifications. A single instrument with two lengths on one page is a reason to confirm the figure against the maker’s own specification sheet.
Common misunderstandings
“A rib shear is a Class I device by regulation name”
The regulation covers general-use manual instruments by generic names, and rib shears are not among the named examples. The classification of a specific product is set by its listing, not by the instrument name.
“A rib shear is a saw”
In 21 CFR 878.4800, a cutter and a saw are separate named examples. Catalogues describe rib shears as cutting instruments, not saws.
“Every listing for the same pattern means the same instrument”
The same pattern name appears under different makers, materials and lengths. The Giertz item is described as martensitic steel by the Red Cross and as stainless steel in the Surgical Holdings range, and the Brunner page shows two different lengths.
FAQ
What is a rib shear used for?
It is used to cut ribs in chest surgery, according to the Red Cross items catalogue entry for the Giertz rib shear.
What are the main types of rib shears?
Surgical Holdings lists Giertz, Tudor Edwards anterior and Tudor Edwards posterior. Xelpov Surgical lists a Brunner rib shear with left and right versions.
What is a rib shear made of?
The Red Cross Giertz item specifies martensitic steel (quenched, magnetic steel). Surgical Holdings and Xelpov describe their shears as stainless steel.
Are rib shears reusable?
Xelpov states that its Brunner rib shear can be sterilized and reused. Reprocessing instructions for any specific shear come from its manufacturer.
How does the FDA classify a rib shear?
21 CFR 878.4800 sets Class I, 510(k)-exempt status for general-use manual surgical instruments but does not name rib shears. The generic FDA entry “Cutter, Surgical” is product code FZT, Class 1, though a rib shear’s own listing should be confirmed from its maker.
Sources
- eCFR, 21 CFR 878.4800, Manual surgical instrument for general use: ecfr.gov (checked 2026-11-02)
- FDA openFDA device classification database, “Cutter, Surgical” (FZT): api.fda.gov (checked 2026-11-02)
- IFRC and Red Cross items catalogue, Rib shears, Giertz (XSINMEDI541525): itemscatalogue.redcross.int (checked 2026-11-02)
- Surgical Holdings, Cardiothoracic Rib Shears: surgicalholdings.co.uk (checked 2026-11-02)
- Xelpov Surgical, Brunner Rib Shear: xelpovsurgical.com (checked 2026-11-02)







