Written and maintained by CASRAI Editorial Board
Published · Last updated
On this page
Simpson-Luikart forceps are a reusable, hand-held obstetric instrument that combines the pelvic curve of Simpson forceps with Luikart blades. This page covers what the FDA says the device is, how it is classified, which lengths appear in public records, and what to check on a product listing. Intended readers: clinic staff, buyers and students.
This page describes products and general use; it is not medical advice.
What are Simpson-Luikart forceps?
Simpson-Luikart (also written Luikart-Simpson) forceps are a combination obstetric forceps. One seller describes them as uniting “the complete pelvic curvature of the Simpson forceps with the pseudofenestrated Luikart blades” (VUBU Medical product page, checked 2026-11-02). Under US regulation the device falls under the general definition in 21 CFR 884.4400: “a device consisting of two blades, with handles, designed to grasp and apply traction to the fetal head in the birth passage and facilitate delivery.”
Who uses it: obstetric specialists. The seller page restricts use to experienced obstetric specialists, and the AccessGUDID record lists it as a prescription-use device.
How are they built?
The FDA definition describes two blades with handles. The seller listing gives stainless steel (grade 1.4021) and an English lock joining the two halves, and describes the instrument as reusable and sterilizable. For the wider family, see medical forceps types and surgical instrument names and FDA groups.
How does the FDA classify obstetric forceps?
21 CFR 884.4400 lists obstetric forceps as Class II (special controls), exempt from the premarket notification procedures (510(k)) subject to the limitations in 21 CFR 884.9 (checked 2026-11-02).
Why do records show different product codes?
Two public records for Luikart-Simpson forceps carry different FDA product codes, and each is stated as listed in that record:
| Record | Product | Product code listed |
|---|---|---|
| FDA recall database, Class 2 recall (2019) | Fetzer Surgical Luikart Simpson OB Forceps, item 46-5050 | HDA (Forceps, surgical, gynecological) |
| AccessGUDID record 00887482078884 | Symmetry Luikart-Simpson, Aspen Surgical, cat. 53-5052 | GEN (Forceps, General and Plastic Surgery) |
When comparing listings, read the product code from each manufacturer’s own record rather than assuming one code applies to every Luikart-Simpson model.
What sizes are listed?
| Listing | Length stated | Source |
|---|---|---|
| Fetzer Luikart Simpson OB Forceps, item 46-5050 | 14 in (35.5 cm) | FDA recall record |
| Symmetry Luikart-Simpson, cat. 53-5052 | 14.25 in (14 1/4 in) | AccessGUDID |
| Simpson-Luikart obstetrical forceps | 36 cm | VUBU Medical product page (seller description) |
The public records cluster around 14 in, or roughly 36 cm. Lengths differ slightly between listings, so check the stated length and catalogue number rather than assuming two products are the same.
What should you verify on a listing?
- Reusable and non-sterile. The AccessGUDID record shows single-use as “No” and the device as not packaged sterile. The record states the device requires sterilization before use. Follow the manufacturer’s instructions for use for reprocessing; see equipment for sterilization for the general equipment picture.
- That the two halves separate. In a Class 2 recall initiated 2018-12-28 (posted 2019-01-18, terminated 2020-09-17), Fetzer Medical GmbH recalled 174 units of its Luikart Simpson OB forceps (item 46-5050) after a report of doctors being unable to pull the forceps apart. The FDA record gives the cause as device design. The recall is closed, but it shows why lock function and recall notices are worth checking.
- Prescription-use labelling. The AccessGUDID record lists prescription use as “Yes”.
- Manufacturer documents. The seller page cites CE Class I and ISO 13485:2016. Those are the seller’s statements, not regulator records.
Safe use and handling basics
Use is limited to trained obstetric clinicians following the manufacturer’s instructions for use and local protocols. Because the AccessGUDID record shows the device ships non-sterile, it is reprocessed according to those instructions. This page gives no technique, indications or procedure steps. For delivery-room supplies more broadly, see the C-section kit guide.
Common mistakes
- Assuming the instrument arrives sterile. The AccessGUDID record says it does not.
- Reading “exempt from premarket notification” as “unregulated”. The device is Class II with special controls.
- Treating one product code as universal when public records list both HDA and GEN.
- Assuming two listings are the same product. Lengths and catalogue numbers differ (14 in, 14.25 in, 36 cm).
FAQ
What is a Simpson-Luikart forceps?
A combination obstetric forceps joining the Simpson pelvic curve to Luikart blades, per a seller description. The FDA defines obstetric forceps generally as two blades with handles designed to grasp and apply traction to the fetal head.
Are Simpson-Luikart forceps reusable?
Yes. The AccessGUDID record for Symmetry Luikart-Simpson lists single-use as “No”, and the seller page describes the instrument as reusable and sterilizable.
Are they sterile out of the box?
The AccessGUDID record says the device is not packaged sterile and requires sterilization before use. Follow the manufacturer’s instructions.
What FDA class are they?
Class II (special controls), exempt from premarket notification, under 21 CFR 884.4400, subject to the limitations in 21 CFR 884.9.
How long are they?
Public records list 14 in (35.5 cm), 14.25 in and 36 cm depending on listing.
Sources
- 21 CFR 884.4400 Obstetric forceps, eCFR (text also at Cornell LII; checked 2026-11-02).
- FDA Medical Device Recalls, Class 2 recall of Luikart Simpson Obstetrical Forceps, recall record 170172, checked 2026-11-02.
- NLM AccessGUDID, Symmetry Luikart-Simpson, 00887482078884, checked 2026-11-02.
- VUBU Medical, Simpson-Luikart obstetrical forceps 36 cm (seller description), checked 2026-11-02.







