Written and maintained by CASRAI Editorial Board
Published · Last updated
This page describes products and general use; it is not medical advice.
On this page
Short answer
Standard medical equipment has no single official list. The phrase is used for three different things, and knowing which one you need decides what to check. This page separates them, shows the one baseline that applies to every device in the United States, and gives a record checklist you can use for any item.
Who uses this: clinic staff, practice managers, students and anyone buying or stocking equipment for a care setting.
Definition and scope
It can mean (1) the usual baseline set of equipment a care setting keeps on hand, (2) the regulatory baseline every device must meet, or (3) a facility standardizing on one model or make so staff learn fewer devices. Only the second is set by a regulator; the first and third are local decisions.
| Meaning | Who defines it | Where to read more |
|---|---|---|
| Usual set kept in a setting | The facility and its clinical staff; no single national list | types of medical equipment, medical supplies for a doctor’s office, EMS equipment |
| Regulatory baseline | FDA, through device classes and General Controls | Next section |
| Home-use durable equipment | Medicare’s DME definition | durable medical equipment for home use |
How the term is used in practice: the regulatory baseline
In the United States, FDA assigns each device to Class I, II or III based on risk. Per FDA’s page “Classify Your Medical Device” (checked 2026-11-02), Class I includes devices with the lowest risk and Class III those with the greatest risk. All classes are subject to General Controls, which FDA describes as the baseline requirements of the Federal Food, Drug and Cosmetic Act.
| Class | Risk level | Controls named by FDA |
|---|---|---|
| Class I | Lowest risk | General Controls |
| Class II | Between Class I and Class III | General Controls and Special Controls |
| Class III | Greatest risk | General Controls and Premarket Approval (PMA), unless a preamendments device |
FDA’s page also states that approximately 572, or 74%, of Class I devices are exempt from the premarket notification process (figure as stated on the page, which is undated). So low-risk everyday items often reach the market without a 510(k), but they are still under General Controls. For the pathways in detail, see the guide to FDA medical device regulations: classification, 510(k) and PMA.
Types and related concepts
Who is responsible for keeping equipment in working order?
For hospitals taking part in Medicare, the Conditions of Participation at 42 CFR 482.41(d)(2) state: “Facilities, supplies, and equipment must be maintained to ensure an acceptable level of safety and quality.” That is a hospital rule and should not be read as the rule for every clinic or home. Other settings should check their own regulator and accreditor.
What is the Medicare test for durable medical equipment?
Medicare.gov (checked 2026-11-02) lists DME as equipment that is durable (can withstand repeated use), used for a medical reason, typically only useful to someone who is sick or injured, used in the home, and expected to last at least 3 years. Its examples include canes, commode chairs, crutches, hospital beds, wheelchairs and scooters.
Where it matters for labs, clinics and supply decisions
These are records to ask for and file, drawn from the sources listed below. They are not an approval process.
- Risk class and controls: which FDA class the device type is in, so you know which controls apply.
- Manufacturer instructions for use: keep the current copy with the item.
- Maintenance record: if you are a participating hospital, 42 CFR 482.41(d)(2) expects equipment to be maintained; a dated record shows it was.
- Supplier documentation: see medical equipment suppliers: types, FDA registration and what to verify for the documents to request.
- Whole-life cost: the dictionary entry on total cost of ownership in medical equipment purchasing explains why purchase price alone is incomplete.
Common misunderstandings
- Treating “standard” as a legal category. FDA classes and General Controls are the regulatory baseline; a “standard list” is not.
- Applying a hospital rule (42 CFR 482.41) to a clinic or home setting.
- Assuming a Class I exemption from premarket notification means no FDA requirements; General Controls still apply to all classes.
- Calling any common clinic device “DME” without checking it against the Medicare criteria above.
FAQ
Is there an official list of standard medical equipment?
Not in the FDA or Medicare sources cited here. FDA classifies device types by risk; what a setting keeps on hand is decided locally.
Does “standard” mean a device is Class I?
No. Class is set by risk, per FDA. Class I is the lowest-risk group.
Do all FDA classes have the same baseline?
Yes. FDA states all classes are subject to General Controls; Class II adds Special Controls and Class III adds premarket approval.
Sources
- FDA, Classify Your Medical Device, checked 2026-11-02.
- 42 CFR 482.41 Physical environment, paragraph (d)(2), Cornell LII text, checked 2026-11-02.
- Medicare.gov, Durable medical equipment (DME) coverage, checked 2026-11-02.







