Written and maintained by CASRAI Editorial Board
Published
On this page
Sulfate-reducing bacteria (SRB) are microorganisms that, during anaerobic respiration, reduce sulfate to hydrogen sulfide (H₂S), a corrosive and toxic gas. In oil and gas systems this matters because SRB living in biofilms on steel surfaces are among the main organisms linked to microbiologically influenced corrosion (MIC) and to sulfide production in reservoir and produced waters.
Short answer
SRB are a functional group, not a single species: what they share is dissimilative sulfate reduction. Vieira et al. (2026) describe this process as generating H₂S that can act directly and indirectly on carbon steel, and the same group of organisms is named in the oil-industry corrosion literature going back to 1926. The practical points for a laboratory or operations team are that the damage is driven by attached communities rather than free-floating cells, that culture-based counts can understate what is on a surface, and that the standards used to monitor MIC differ in which method families they cover. The data table below the body of this page compares seven of those standards.
Definition and scope
In the sources used for this page, SRB are described through what they do. Bidzhieva et al. (2026), characterising a bacterium from a petroleum reservoir, report that the genus Desulfoplanes consists of anaerobic, Gram-stain-negative, non-spore-forming curved rods that reduce sulfate, thiosulfate and sulfite to hydrogen sulfide and use a small range of organic compounds, or molecular hydrogen with CO₂, as electron donors and carbon sources. Their new species, Desulfoplanes aerotolerans, grew anaerobically and also under microaerophilic conditions (5% O₂ by volume), a reminder that “anaerobic” organisms do not always die on contact with oxygen. The strain used formate, lactate, yeast extract and H₂/CO₂/acetate as energy sources for reducing sulfate to sulfide.
Scope matters for how the term is used on a page like this one. SRB are one of several groups that appear together in corrosion work. Vitez et al. (2026) list the key anaerobic contributors to MIC as sulfate-reducing, nitrate-reducing, acid-producing and metal-oxidising bacteria, together with methanogenic archaea. Bidzhieva et al. add that acid-forming fermentative bacteria, which can also produce sulfide by reducing oxidised sulfur compounds other than sulfate (sulfite, thiosulfate, elemental sulfur), have been shown to cause corrosion alongside SRB and sulfate-reducing archaea (SRA). A sample that shows SRB therefore does not by itself identify the whole corrosion community.
How SRB cause souring and corrosion
Hydrogen sulfide and the biofilm together
Vieira et al. give two linked mechanisms. The first is chemical: H₂S from dissimilative sulfate reduction is corrosive to metal. The second is physical: biofilm, a community of sessile cells adhered to a surface and immersed in an extracellular polymeric substance (EPS), contributes to accelerating corrosion through a positive interaction between the metal and the SRB, because the metal provides sources for the bacteria’s metabolism. Their abstract summarises it as H₂S production and biofilm formation accelerating metal degradation in anaerobic environments.
Why attachment, not mere presence, is the risk
Vitez et al. (2026) state that planktonic (free-floating) microorganisms generally pose little risk to metal integrity; the real threat arises when organisms attach to surfaces and form biofilms. This is the single most useful idea for interpreting a lab result. A water sample with SRB in it describes the fluid; it does not by itself describe what is established on a pipe wall or coupon. The same paper notes that MIC has been known for more than 100 years and is often associated with anaerobic environments where SRB or methanogenic archaea accelerate corrosion of metals.
Petroleum reservoirs and produced water
Bidzhieva et al. open by noting that biogenic corrosion of steel equipment is especially pressing for petroleum reservoirs with high-salinity formation water containing sulfate, and that corrosion in the oil industry has been associated with SRB activity since the work of Bastin and of Ginzburg-Karagicheva in 1926. In Tatarstan reservoir formation water, Desulfoplanes predominated by 16S rRNA gene amplicon sequencing and metagenomic analysis, and genome analysis of the isolate found genes for sulfate reduction, hydrogenase and iron uptake, which the authors read as confirming the strain’s ability to participate in steel biocorrosion, including general and pitting corrosion. Water handling is part of the same system: see the CASRAI guide to the injection well for where produced and injected fluids go.
Detecting and monitoring SRB: what each method can and cannot show
Culture-based counts
Culture-based tests are the traditional route. Vitez et al. report that, per US pipeline safety investigation records, MIC confirmation often relies on “Quick Kits” designed to detect aerobic and anaerobic heterotrophs, SRB and acid-producing microorganisms, and they caution that culture results do not necessarily indicate a corrosion risk. In the lab, SRB are typically grown in defined media; Vieira et al. cultivated a mixed SRB culture in modified Postgate E medium prepared with natural seawater (including Na₂SO₄ at 1 g/L, sodium lactate, yeast extract, ascorbic acid and resazurin, pH 7.6). For the general principles behind such media, see culture media preparation, and for oxygen-free handling see anaerobic bacteria culture.
Molecular methods
The documented limitation of culture is the central case study in Vitez et al. A standard most-probable-number (MPN) method had been used at one pipeline site since 2002; later, quantitative PCR found high counts of SRB, SRA and methanogens on the pipeline surface, which the authors take as showing that MPN underestimated the actual microbial load. They conclude that MIC assessment has progressed from culture-based techniques and visual inspection to molecular diagnostics, with 16S rRNA sequencing and qPCR widely applied. For readers new to the technique itself, see the CASRAI qPCR guide.
Other measurements used with SRB cultures
In the pilot-scale study, Vieira et al. tracked H₂S production with an automatic titrator using AgNO₃, plus optical density and ATP concentration, and examined steel coupons by scanning electron microscopy and profilometry over 38 days. That combination (a chemical product, a growth proxy, an activity proxy and surface evidence) is a useful template for what a defensible SRB experiment records, because no single readout answers both “are they present” and “are they damaging the metal”.
How the monitoring standards differ
Vitez et al. compare the method families covered by seven international standards. Their comparison, reproduced in the data table below this page’s body, shows that the older NACE documents rely on culture and (for TM0106 and TM0212) visual and electrochemical approaches, while NACE TM21465-2024 is the one that introduces molecular methods. In the text they describe NACE TM0194-2014 as emphasising field monitoring with selective media for SRB and other groups, and TM0212-2018 as focusing on visual inspection, surface sampling and culture-based methods for microbial populations, complemented by electrochemical measurements. The standards themselves are paywalled, so use the table as a map of what each covers and read the standard before relying on it.
Control strategies and their documented limits
Vieira et al. describe the conventional response to MIC as chemical biocides such as tetrakis(hydroxymethyl)phosphonium sulfate (THPS). They report that THPS is effective but limited by resistance development and poor penetration of biofilms, and that biofilm cells may require higher doses and can develop resistance after repeated treatment. Concentrations in the literature they cite range from 50-100 ppm up to 500-1000 ppm, and the sulfate released when THPS dissociates can itself stimulate SRB growth. Other approaches they list include biomineralisation, cathodic polarisation and alloying additions, and biocide enhancers such as peptides or plant extracts, which show operational limits such as fast degradation and difficulty scaling to industrial volumes. Their own test of a non-specific bacteriophage cocktail on a mixed SRB biofilm in an 8 L pilot tank with AISI 1020 carbon steel coupons found disrupted, less aggressive biofilms on treated surfaces by SEM and profilometry; this is one pilot study and should be read as research, not as a recommended treatment. This page gives no dosing guidance.
Where it matters for labs and operations
- Sampling and interpretation. Because attached cells drive risk, a fluid-only count answers a different question from a surface or coupon analysis (Vitez et al.).
- Method choice and documentation. If a site’s history rests on MPN counts, the qPCR case above shows why a change of method can change the apparent microbial load; record the method and standard version alongside every result.
- Corrosion share is uncertain. An analysis of public accident databases with expert assessment suggests MIC might be associated with roughly 10-20% of corrosion-related incidents in the process industry, but the authors stress this range should be read cautiously because of substantial limits in reporting and confirmation.
- Worker safety. H₂S is toxic; the CASRAI guide on hydrogen sulfide exposure covers the hazard side, which this page does not.
Common misunderstandings
- “SRB in the sample means the pipe is corroding.” Free-floating cells generally pose little risk; attachment and biofilm formation are the threat, and culture results do not necessarily indicate a corrosion risk.
- “SRB are the only culprits.” Nitrate-reducing, acid-producing and metal-oxidising bacteria and methanogenic archaea are also named, as are fermentative bacteria that reduce other sulfur compounds.
- “Anaerobic means oxygen kills them.” Desulfoplanes aerotolerans grew under 5% O₂ in the study cited above.
- “A low culture count is reassuring.” In the documented pipeline case MPN underestimated the load that qPCR later found.
- “Biocide fixes it.” THPS is reported to be limited by resistance and poor biofilm penetration, and its sulfate can stimulate SRB.
Frequently asked questions
What are sulfate-reducing bacteria?
Anaerobic bacteria that carry out dissimilative sulfate reduction, using sulfate as an electron acceptor and releasing hydrogen sulfide (Vieira et al., 2026). Some, such as Desulfoplanes, also reduce thiosulfate and sulfite (Bidzhieva et al., 2026).
Why do SRB cause corrosion?
Through H₂S, which acts directly and indirectly on carbon steel, and through biofilm, whose interaction with the metal accelerates the process (Vieira et al., 2026).
Are free-floating SRB dangerous to steel?
Planktonic microorganisms generally pose little risk; the threat arises when they attach and form biofilms (Vitez et al., 2026).
How are SRB detected?
By selective-media culture, MPN and kit methods, and increasingly by qPCR and 16S rRNA sequencing; the standards differ in which families they cover (Vitez et al., 2026; see the data table).
Does this page give treatment or dosing advice?
No. It reports what the cited studies state about biocide limits and does not recommend products, concentrations or schedules. For product choice, consult the relevant standard and the safety data sheet.
Sources
- Vitez et al., “Microbially Induced Corrosion: A Hidden Risk in Industrial Accidents”, ACS Omega 2026, 11(12):18790-18804, doi 10.1021/acsomega.5c09790 (PMC13044617). Read 2026-11-15.
- Vieira et al., “Influence of a Bacteriophage Cocktail on Sulfate-Reducing Bacteria in a Pilot-Scale System”, Bioengineering 2026, 13(10):1166, doi 10.3390/bioengineering13101166 (PMC13701630). Read 2026-11-15.
- Bidzhieva et al., “Phenotypic and genomic characterization of a halophilic sulfate-reducing bacterium Desulfoplanes aerotolerans sp. nov. from a petroleum reservoir”, Frontiers in Microbiology 2026, 17:1968038, doi 10.3389/fmicb.2026.1968038 (PMC13713477). Read 2026-11-15.
Data: Method families covered by seven standards for microbiologically influenced corrosion (MIC) assessment
For each of seven international standards or draft standards, whether it covers visual inspection, culture-based, molecular and electrochemical methods, as compiled in the comparative overview of Vitez et al. (ACS Omega, 2026) from a review of the standards.
Period covered: 2014/2024.
| Standard | Visual inspection | Culture-based methods | Molecular methods | Electrochemical methods |
|---|---|---|---|---|
| NACE TM0106-2016 | yes | yes | no | yes |
| NACE TM0212-2018 | yes | yes | no | yes |
| NACE TM0194-2014 | no | yes | no | no |
| NACE TM21465-2024 | no | limited | yes | no |
| ISO 11130 | no | yes | no | no |
| ISO/DIS 21055 | no | yes | no | no |
| ASTM C1894-22 | no | yes | no | no |
Sources
- Vitez et al., Microbially Induced Corrosion: A Hidden Risk in Industrial Accidents, ACS Omega 2026 (accessed 2026-11-15)
Compiled by CASRAI from the sources above. Free to reuse under CC BY 4.0 with attribution.







