Written and maintained by CASRAI Editorial Board
Published
On this page
Taylor & Francis does not publish a tool called “Journal Finder”. Its journal-matching tool is the Journal Suggester: you paste an article abstract or keywords, click “Reveal suggested journals”, and it returns Taylor & Francis journals that have previously published related articles. The result is a starting shortlist, not an acceptance prediction, and the journal’s editors still decide every submission.
What the Taylor & Francis journal finder is
People searching for a “Taylor and Francis journal finder”, a “journal finder Taylor and Francis” or a “Taylor and Francis journals finder” are looking for the same thing: a way to match a manuscript to a journal published by Taylor & Francis (which also publishes under the Routledge name). On its Author Services site the publisher names that tool the Journal Suggester. According to the publisher’s Journal Suggester FAQs (read 2026-11-19), it uses artificial intelligence to match the subjects covered in your article to related content across the corpus of over 5 million articles on Taylor & Francis Online.
The same FAQs explain why such a tool exists: there are thousands of academic journals, many new titles launch each year, and choosing is hard, especially for interdisciplinary work. The publisher describes the Suggester as the first stage of a process that gives you a shortlist, with the further narrowing done by you.
Three things are easy to confuse, and the distinction decides which one you need:
- The Journal Suggester starts from your own text (abstract or keywords) and returns journals.
- Browsing by subject on Taylor & Francis Online starts from a subject area and returns journals. The publisher’s choosing-a-journal guide lists it as a desk-research route.
- A library database search of Taylor & Francis content finds articles, not journals matched to your manuscript. It is a reading tool, not a journal-selection tool.
Who runs it and what it matches against
The Journal Suggester is run by Taylor & Francis and sits in its Author Services pages, alongside the “Choosing a journal” guide. On that guide the publisher describes the Suggester as one of several AI tools it uses to support the efficiency and quality of the publishing process. It only covers Taylor & Francis journals: it will not tell you about a better fit at another publisher. For that, see the alternatives table below and CASRAI’s roundup of journal finder tools.
What it matches against matters for how you read the output. The publisher says it compares your abstract or keywords with articles already on Taylor & Francis Online and lists journals that “have previously published articles related to your abstract”. So a suggested journal is one with a track record of related papers. It is not necessarily one that is currently seeking your topic, one whose scope has recently changed, or one that accepts your article type. Those are the questions you answer afterwards.
How to use the Journal Suggester, step by step
The publisher documents the tool and the shortlisting steps as follows (Author Services pages read 2026-11-19). Interface terms are quoted as the publisher writes them.
- Prepare your input. Take the abstract of the article you are working on, or a set of keywords relevant to it.
- Paste it into the Journal Suggester and click “Reveal suggested journals”. The tool returns a list of journals to consider.
- Read the open access information. The Suggester indicates which open access options are available for each journal. The publisher says to visit the journal pages on Taylor & Francis Online for full details.
- Open each candidate’s home page and read its aims and scope. The publisher states that aims and scope are found on the journal’s home page on Taylor & Francis Online, and that this is how you judge whether your article suits the journal’s audience and purpose.
- Check metrics, if you care about them. If a journal’s metrics are public, navigate to the journal’s home page, open the “About this journal” menu and select “Journal metrics”. If the journal has an Impact Factor it is listed on the home page.
- Check policies and procedures. Read the journal’s peer-review policy and submission process, and the Taylor & Francis Group editorial policies that apply to all its journals.
- Narrow the list with the publisher’s own questions (next section), then pick one journal to submit to.
The tool page does not say how many journals a search returns, so do not plan around a fixed number. Treat the list as a prompt to look, not a ranking.
After the shortlist: which Taylor & Francis page answers which check
The publisher’s Journal Suggester FAQs give four questions to ask of the results: which suggested journals did you consult most often during the research (do any appear frequently in your literature review); what do their aims and scope say about fit; does your funder or institution require open access; and, where relevant, what the journal’s readership looks like. The choosing-a-journal guide adds audience, policy and performance questions. The table below pairs each check with the place the publisher says to find the answer.
| Check | Question to ask | Where the publisher says to look |
|---|---|---|
| Subject fit | Do the aims and scope match what your article actually does? | The journal’s home page on Taylor & Francis Online |
| Audience | General-interest or specialist readers? International or region-specific? | Aims and scope, then the journal’s own pages |
| Open access | Does your funder or institution require it, and what options exist? | The Suggester’s open access indication, then the journal page |
| Peer review | Which review model does the journal use, and am I content with it? | The journal’s peer-review policy; the aims and scope statement |
| Metrics | Is an Impact Factor important for this decision? | Journal home page: “About this journal” then “Journal metrics” |
| Timing and format | Is there a call for papers or special issue for your topic? Does the journal accept my article type? | The calls for papers page on Author Services; the journal’s submission information |
| Open science | Does the journal support Open Science Badges (Open Data, Preregistered, Open Materials) or have a data sharing policy? | The journal’s policies; the choosing-a-journal guide |
An illustrative example (a composite, not a real case): a researcher pastes the abstract of an interdisciplinary education study and gets back several journals. She sorts them by checking the aims and scope of each, notes that two require a specific article format her manuscript does not fit, and keeps the remaining candidates. A funder that requires open access narrows the list further, and she then reads the peer-review policy and metrics of what is left. At no stage does the Suggester itself make the choice; each cut comes from a page on the journal’s own site.
Strengths and limits
What it does well
- It starts from your own text, which helps when you work across fields and do not know which journals cover the overlap. The publisher names interdisciplinary research as a case where it is useful.
- It surfaces open access options per journal at the shortlist stage.
- It is based on actual published articles, so a suggestion has at least published related work.
What it does not do
- It does not guarantee acceptance. The publisher states that the Suggester only gives a list of journals to consider, that some will be more appropriate than others, and that all submitted articles still go through the usual peer review, with the decision made by the journal’s academic editors.
- It covers only Taylor & Francis journals. It cannot say whether a different publisher’s journal fits better.
- Its accuracy is the publisher’s own assessment. The FAQs rely on customer feedback and tell you to assess suggestions carefully; no independent accuracy measure is given there.
- It collects data. The publisher says submitted abstracts are stored and compared with the results, that clicks on results are monitored, and that the information is used only to improve the tool, is not shared, and is not directly identifying. If your manuscript is confidential or under embargo, consider using keywords instead of the full abstract, or read the publisher’s statement before pasting.
Common mistakes the publisher’s guidance points to
- Submitting to the wrong journal. The choosing-a-journal guide says the top reason editors give for rejecting articles is that authors submitted them to the wrong journal. Reading aims and scope is the cheapest defence.
- Choosing after writing. The guide says that ideally you choose the journal before writing, so you can build on work already published there.
- Trusting an intermediary. The same guide warns about fraudulent submitting agents and editing services and points to its advice on spotting them.
Alternatives to the Taylor & Francis Journal Suggester
The Suggester is one of several routes, and the publisher itself lists others in its guide. The table compares routes whose input, output and scope appear on pages read for this guide. The data table below the article adds the same routes in downloadable form.
| Route | What you give it | What you get | Scope |
|---|---|---|---|
| Taylor & Francis Journal Suggester | Abstract or keywords | Journals that have published related articles, with open access options | Taylor & Francis journals only |
| Browse by subject on Taylor & Francis Online | A subject area | Journals in that subject | Taylor & Francis journals only |
| Calls for papers page (Author Services) | Nothing: you browse | Journals actively asking for submissions on a theme | Taylor & Francis journals |
| Jane (Journal/Author Name Estimator) | Title and/or abstract, or keywords | Best-matching journals, authors or articles compared against PubMed documents | Journals in PubMed, from any publisher; tags journals indexed in MEDLINE and open access journals approved by DOAJ |
| Colleagues, supervisors and librarians | Your project and your questions | Experience-based shortlists | Any publisher |
Jane’s own page carries a warning worth repeating: because it relies on PubMed data, which can contain papers from predatory journals, such journals can appear in its results. For publisher-specific tools from other publishers, and what they have in common, see journal finder tools; for the wider decision process across publishers, see how to choose a journal.
Frequently asked questions
Is Taylor and Francis an academic publisher?
Yes. Taylor & Francis publishes academic journals and books, including under the Routledge name, and its Author Services site describes peer review for the journals it publishes. How much weight a particular title deserves is a separate, journal-level question; CASRAI’s Is Taylor & Francis peer reviewed? goes through it.
How do I find peer-reviewed journals?
Start with a shortlist from desk research (journals you already read, your library’s subscriptions, Google Scholar, subject browsing on Taylor & Francis Online), a publisher tool such as the Journal Suggester, or advice from colleagues, supervisors and librarians, as the publisher’s choosing-a-journal guide lays out. Then confirm peer review for each journal from its own aims and scope and peer-review policy rather than from the tool that suggested it. The CASRAI dictionary entry on peer review defines what to look for.
How do I select a journal for publication?
Do some desk research, draw up a shortlist, and then read the aims and scope of each journal to judge whether your work suits it, as the publisher’s FAQ puts it. Then work through audience, peer-review policy, submission process, open access, speed and metrics. CASRAI’s how to choose a journal guide covers the cross-publisher version of this process.
How to tell if an article is peer-reviewed on Taylor and Francis?
Taylor & Francis states that every full research article published in its journals has been through peer review, as outlined in the journal’s aims and scope information (Author Services peer-review page, read 2026-11-19). So the check is on the journal’s home page: read the aims and scope and the peer-review policy for the review model. The publisher notes that the review model varies between journals, even of the same publisher, so read each journal’s own statement.
Does a Journal Suggester result guarantee acceptance?
No. The publisher says the Suggester only produces a list of journals to consider and that the journal’s academic editors make the acceptance decision after the usual peer review.
Sources
- Taylor & Francis Author Services: Choosing a journal FAQs and Journal Suggester FAQs, checked 2026-11-19
- Taylor & Francis Author Services: Choosing a journal, checked 2026-11-19
- Taylor & Francis Author Services: Choosing a journal FAQs, checked 2026-11-19
- Taylor & Francis Author Services: Understanding the peer review process, checked 2026-11-19
- Jane: Journal / Author Name Estimator (The Biosemantics Group), checked 2026-11-19
Data: Routes for finding a Taylor & Francis journal: input, output and scope
Compares the journal-selection routes described on Taylor & Francis Author Services pages (Journal Suggester, subject browsing, calls for papers, desk research, asking colleagues) with the Jane estimator, by what you give each route, what it returns and which publishers it covers. Compiled from the pages listed as sources, read 2026-11-19.
Period covered: 2026-11.
| Route | Input | Output | Publisher scope |
|---|---|---|---|
| Taylor & Francis Journal Suggester | Article abstract or keywords | Journals that previously published related articles, with open access options | Taylor & Francis journals |
| Browse by subject on Taylor & Francis Online | Subject area | Journals in that subject | Taylor & Francis journals |
| Calls for papers page (Author Services) | None (browse) | Special issues and themes seeking submissions | Taylor & Francis journals |
| Jane (Journal/Author Name Estimator) | Title and/or abstract, or keywords | Matching journals, authors or articles compared with PubMed documents | Journals in PubMed, any publisher |
| Colleagues, supervisors and librarians | Your project and questions | Experience-based shortlist of journals | Any publisher |
Sources
- Taylor & Francis Author Services: Journal Suggester FAQs (accessed 2026-11-19)
- Taylor & Francis Author Services: Choosing a journal (accessed 2026-11-19)
- Jane: Journal / Author Name Estimator (accessed 2026-11-19)
Compiled by CASRAI from the sources above. Free to reuse under CC BY 4.0 with attribution.







