Skip to main content
v2026.11,986 entries · CC-BY 4.0

UGENE: Install, Align Sequences, Design Primers and Build Workflows

Task-to-menu guide to Unipro UGENE: install requirements, aligning sequences, Primer3 primers, Workflow Designer, and how to cite it.

Written and maintained by CASRAI Editorial Board

Published · Last updated

On this page

UGENE (Unipro UGENE) is a free, open-source desktop bioinformatics application for Windows, macOS and Linux. Researchers use it to view sequences, align them, design PCR primers and chain steps into repeatable workflows, all from one graphical interface. This page maps each of those tasks to the menu path in the current online manual, so you can tell in a few minutes whether UGENE covers the job.

Scope: this is a software orientation for research use. Menu names below are quoted from the UGENE online manual at ugene.net/docs, read 2026-11-08; the program is updated regularly, so the manual for your installed version is the final reference.

What UGENE is used for in research

The UGENE home page (ugene.net, read 2026-11-08) describes it as free open-source bioinformatics software, with the latest release listed as version 53.1 (March 2026) and source code on GitHub. The features it highlights are sequence viewing with NCBI BLAST and Short Tandem Repeats Finder tasks, the Workflow Designer for building pipelines, an Assembly Browser for BAM files that highlights mutations, and a 3D structure viewer. The project is developed by Unipro and its home page also mentions commercial services; this page does not cover them.

The standard citation for the software is Okonechnikov K, Golosova O, Fursov M, UGENE team. Unipro UGENE: a unified bioinformatics toolkit. Bioinformatics 2012;28(8):1166-1167, doi:10.1093/bioinformatics/bts091. Cite the paper and the version number you ran so that others can reproduce your analysis; see our guide to Biopython for the scripted-analysis route.

How to install or access it

Download UGENE only from the official site, ugene.net. The online manual has separate installation pages for Windows, macOS and Linux under Download and Installation, plus a System Requirements page. According to the System Requirements page (read 2026-11-08):

  • From version 34, only 64-bit operating systems are supported: Windows 8 or later, macOS 10.7 or later, and Linux.
  • Minimum RAM is 512 MB; at least 2 GB is recommended.
  • Disk space depends on the components installed: at least 1 GB is recommended for a typical install, and installing every component, including the NGS modules, needs roughly 250 GB.
  • A display resolution of 1280 x 720 or higher is recommended.

Some external tools run only on specific operating systems; the manual’s Data Analysis Tools chapter lists which.

Step by step: common UGENE tasks

Open a sequence or alignment file

Use File > Open from the main menu, or drag the file into the UGENE window. The user manual (v1.30) also lists File > Open As for choosing the file format yourself.

Align sequences

  1. Open the sequences (or an alignment) in UGENE.
  2. Choose an alignment method from the Actions main menu, from the context menu, or with the Align button on the main toolbar.

The manual’s Aligning Sequences page lists these aligners: MUSCLE3 and KAlign (built-in plugins), and ClustalW, MAFFT, T-Coffee and ClustalO, which are run through the External Tools plugin. For background on one of these, see our Clustal Omega guide; to go from an alignment to a tree, see how to make a phylogenetic tree.

Design PCR primers with Primer3

  1. Open a DNA sequence.
  2. Right-click it and choose Analyze > Primer3.
  3. In the Primer Designer dialog, set the parameters. The manual states they match the original Primer3, and hovering over a parameter shows its tooltip.

The manual describes the plugin as a port of Primer3 v. 2.6.1. A notification appears in the bottom-right corner when the calculation finishes; clicking it opens the report. The manual also documents an In Silico PCR extension (with a primer library) for checking primers against a template; our in silico PCR guide explains the concept and NCBI primer BLAST covers the web-based route.

Build and run a workflow

  1. Open Tools > Workflow Designer or choose File > New workflow.
  2. On the Elements tab of the Palette, open Data sources and drag Read alignment onto the Scene.
  3. From Data sinks, drag Write Alignment onto the Scene.
  4. Add a processing element, such as Align with MUSCLE, and connect the elements as the manual’s worked example shows.

The manual’s Manipulating Workflow section has separate pages for validating, running, stopping and pausing a workflow, and for the Dashboard that shows results. Follow those pages for the run step.

Output and how to read it

  • Primer3: the report lists how many primers were considered and how many were filtered out, and why. All primers found are also added as annotations marked on the target sequence, so you can inspect them in the sequence view.
  • Alignments: the alignment opens in the Alignment Editor, where the manual documents working with an alignment and building a phylogenetic tree.
  • Workflows: results are reported through the workflow Dashboard.

Record the UGENE version, the aligner or Primer3 settings and the input file versions in your methods section.

Troubleshooting

  • An aligner is missing from the menu: ClustalW, MAFFT and T-Coffee are described as available through the External Tools plugin; check that plugin and the Data Analysis Tools chapter for your operating system.
  • Install fails or the program is slow: compare your machine with the System Requirements above; a full NGS install needs far more disk space than a typical one.
  • A workflow will not start: the manual has a Validating Workflow page, which is the documented place to check an incomplete or unconnected workflow.
  • Bugs and questions: the UGENE site links to a community forum and a bug tracker.

If UGENE is not the right fit, these guides cover other tools for overlapping tasks: Jalview for alignment viewing, SnapGene Viewer and Geneious for sequence and cloning work, and IGV for genome browsing. Each guide states its own scope and licensing.

Frequently asked questions

Is UGENE free?

The UGENE home page (read 2026-11-08) describes it as free open-source bioinformatics software. The v1.30 user manual states it can be used and distributed under GPLv2. Check the current licence in the download you use.

Which operating systems does UGENE run on?

Windows, macOS and Linux, 64-bit only from version 34, per the System Requirements page.

How do I cite UGENE?

Cite Okonechnikov et al., Bioinformatics 2012;28(8):1166-1167, doi:10.1093/bioinformatics/bts091, and state the version used.

Can UGENE design primers?

Yes. It includes a Primer3 plugin (Analyze > Primer3) and an In Silico PCR extension, both documented in the online manual.

Sources

  • UGENE home page, ugene.net, read 2026-11-08.
  • UGENE online manual, ugene.net/docs: System Requirements, Aligning Sequences, Primer3, How to Create and Run Workflow; read 2026-11-08.
  • Unipro UGENE User Manual v1.30 (2018), archive.ugene.net, for File > Open and the GPLv2 statement.
  • Okonechnikov K, Golosova O, Fursov M, UGENE team. Unipro UGENE: a unified bioinformatics toolkit. Bioinformatics 2012;28(8):1166-1167. doi:10.1093/bioinformatics/bts091.

Follow CASRAI

Research-administration guidance, standards updates and independent tool reviews.

Ask CASRAI · free to try

Ask about UGENE: Install, Align Sequences, Design Primers and Build Workflows

2 free questions a day, no account.

An AI assistant for research: funder rules, compliance, methods and publishing. It links the sources behind its answers and labels answers that come from a web search.

Answers draw on CASRAI's guides and dictionary plus the federal and funder documents we index: Federal Register, Grants.gov, Regulations.gov and UKRI.

Works on this site and inside Claude, Cursor and the AI tools you already use.

Everything CASRAI publishes — this page, the dictionary, the guides and the news — stays open to read, with no account and no card.

Referenced across the research world

University of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logoUniversity of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logo
  • University of Cambridge logo
  • Columbia University logo
  • Crossref logo
  • University of Edinburgh logo
  • Harvard University logo
  • University of Oxford logo
  • Princeton University logo
  • Stanford School of Medicine logo
  • University College London logo
  • ORCID logo

View CASRAI adoption →