Written and maintained by CASRAI Editorial Board
Published · Last updated
This page describes products and general use; it is not medical advice.
On this page
Short answer: there is no HCPCS Level II code named “ulnar gutter splint.” Which code family fits depends on what is being billed (the device or the clinician’s application of it) and on how the device was made: prefabricated off-the-shelf, a prefabricated item customized to a patient, or custom fabricated. Always confirm the final code against the code descriptor and the PDAC.
Who uses this: billing and coding staff, DME suppliers, clinic managers and students who need to know which questions to settle before a splint is coded. For the device itself, see boxer fracture splint (ulnar gutter splint) parts, materials and sizes.
Is there an ulnar gutter splint HCPCS code?
No code carries that name. The DME MAC and PDAC joint article on correct coding of finger, hand, hand-finger and wrist-hand-finger orthoses (Noridian Jurisdiction A and CGS, 2021, checked 2026-11-01) does not mention ulnar gutter splints at all. Its codes are described by construction and fit, not by clinical shape. The MSD Manual (professional edition, checked 2026-11-01) describes ulnar gutter splints as devices applied to immobilize fractures of the 4th and 5th metacarpal, made from plaster or fiberglass splinting material or from ready-made splint material cut to length. A device with that description has to be matched to a descriptor; the name of the splint does not pick the code.
HCPCS or CPT: the device versus the application
CMS describes HCPCS Level II as a standardized coding system used primarily to identify products, supplies and services not included in CPT, and states that CMS maintains the Level II codes and the AMA maintains CPT (Level I) (CMS HCPCS page, checked 2026-11-01). In practice that means two separate questions: which Level II code, if any, describes the splint or orthosis supplied, and which Level I code, if any, describes the clinician’s service of applying it. The CPT descriptors are copyrighted by the AMA, so check them in a current CPT book or with the payer. Whether the supply is billed separately or bundled into the service varies by payer; confirm with the payer.
Hand and wrist-hand-finger orthosis codes compared
The table lists codes from the joint DME MAC/PDAC article that sit nearest an ulnar-side hand splint. It is a map of descriptors, not a recommendation that any row is the ulnar gutter code.
| Code | Descriptor as described in the article | How it is made | What the article says |
|---|---|---|---|
| L3917 | Metacarpal fracture orthosis | Prefabricated item trimmed, bent, molded, assembled or otherwise customized to fit a specific patient | Describes a dynamic U-shaped fracture orthosis with a movable crossbar and pads |
| L3918 | Metacarpal fracture orthosis | Prefabricated, off-the-shelf | Same dynamic U-shaped description |
| L3919 | Hand orthosis without joints | Custom fabricated, includes fitting and adjustment | A static custom fabricated orthosis that supports the hand but allows free motion of wrist and fingers; a complete device, no add-on codes may be billed |
| L3807 | Wrist-hand-finger orthosis, without joint(s) | Prefabricated item trimmed, bent, molded or otherwise customized | Static wrist-hand-finger orthosis |
| L3808 | Wrist-hand-finger orthosis, rigid without joints | Custom fabricated, includes fitting and adjustment | Static, rigid wrist-hand-finger orthosis |
| L3809 | Wrist-hand-finger orthosis, without joint(s) | Prefabricated, off-the-shelf | Static, off-the-shelf, no customization |
Two points follow from the article. L3917 and L3918 are described as dynamic metacarpal fracture orthoses, so they should not be presented as a static ulnar gutter equivalent. And the article does not say that any of these codes is correct for a plaster or fiberglass gutter splint; that match is a descriptor and PDAC question. For the neighbouring families see HCPCS codes for wrist braces, HCPCS codes for finger splints and HCPCS codes for thumb spica splints.
How the way it is made changes the code
The article separates three construction categories, and suppliers must bill the code that matches the item provided:
- Prefabricated, off-the-shelf: used as supplied (for example L3918, L3809).
- Prefabricated and customized: a prefabricated item trimmed, bent, molded, assembled or otherwise customized to fit a specific patient (for example L3917, L3807).
- Custom fabricated: made for the patient, with fitting and adjustment included in the code (for example L3919, L3808).
The construction method has to be documented before a code is chosen. Static and dynamic designs also differ; see static vs dynamic splints. Other short-term immobilization splints are covered in sugar tong splint materials and sizes.
What to confirm before billing
- Is the claim for the device (Level II), the clinician’s application (Level I), or both?
- Was the item off-the-shelf, customized prefabricated, or custom fabricated, and is that written in the record?
- Does the descriptor of the proposed code match the item (static or dynamic, joints or none, body area covered)?
- Is the item a complete device? For L3919 the article says no add-on codes may be billed.
- Does the payer’s own policy, LCD or policy article apply? Correct coding means meeting HCPCS guidelines, LCDs, policy articles and DME MAC articles.
- Has the code been verified with the PDAC? The PDAC HCPCS Helpline is (877) 735-1326, 9:30 a.m. to 5:00 p.m. Eastern, Monday to Friday (dmepdac.com).
Common mistakes
- Looking for a code named for the splint instead of matching a descriptor.
- Treating a dynamic metacarpal fracture orthosis code as the code for a static gutter splint.
- Mixing up the Level II device code and the Level I application code.
- Billing add-on codes to a code that is defined as a complete device.
For a wider list of what counts as DME, see durable medical equipment list.
Frequently asked questions
What HCPCS code is used for an ulnar gutter splint?
None is named for it. Pick the code by matching the item’s construction and function to a descriptor, and verify with the PDAC.
Is an ulnar gutter splint coded with HCPCS or CPT?
The device falls under HCPCS Level II if a Level II code describes it; the clinician’s application is reported under CPT (Level I). They are separate questions; confirm with the payer or coder.
Who decides the correct code?
CMS maintains HCPCS Level II. For DME, the PDAC offers code verification, and suppliers must bill the code that matches the item provided.
Sources
- CMS, Healthcare Common Procedure Coding System, https://www.cms.gov/medicare/coding-billing/healthcare-common-procedure-system (checked 2026-11-01)
- Noridian JA DME, Correct Coding of Finger, Hand, Hand-Finger and Wrist-Hand-Finger Braces (Orthoses), https://med.noridianmedicare.com/web/jadme/policies/dmd-articles/2021/correct-coding-of-finger-hand-hand-finger-and-wrist-hand-finger-braces-orthoses-revised (checked 2026-11-01)
- CGS Medicare JB, same joint article, https://cgsmedicare.com/jb/pubs/news/2021/10/cope23779b.html (checked 2026-11-01)
- MSD Manual Professional, Ulnar gutter splint, https://www.msdmanuals.com/professional/injuries-poisoning/how-to-splint-or-immobilize-an-upper-limb/how-to-apply-an-ulnar-gutter-splint (checked 2026-11-01)







