Skip to main content
v2026.11,986 entries · CC-BY 4.0

Serum Bottles: Laboratory Types, Sizes and Closures

Identify laboratory serum bottles by material, capacity and closure size, with sourced glass and plastic examples and handling precautions.

Written and maintained by CASRAI Editorial Board

Published

On this page

Laboratory serum bottles are glass or plastic containers that accept compatible stoppers and seals for sample storage and other specified laboratory applications. Capacity, bottle material and closure dimensions describe different features: the mouth outside diameter determines the nominal seal size, while the body dimensions describe the bottle’s footprint.

Who uses them: laboratory researchers and staff working with stored samples, diluent solutions, diagnostic reagents and freeze-drying applications. The examples here concern laboratory containers; the same search phrase also appears on cosmetic packaging.

What serum bottles are and what they are used for

Serum bottles are a container format rather than a statement about their contents. DWK lists sample storage and lyophilization among the applications for its WHEATON molded glass bottles. Its polypropylene family is described specifically for diluent solutions. A bottle described as a serum bottle therefore needs a more complete specification before its intended role is clear.

DWK’s vaccine-workflow brochure also identifies diagnostic reagents, standards and chromatography among applications for its serum vials and bottles. These are manufacturer-described uses, not evidence that any bottle with that name is suitable for every laboratory process. The material, finish and associated closure remain part of the product description.

For inventory descriptions, distinguish the empty container from the material stored inside it. A record that says only “serum bottle” leaves both the container specification and the contents ambiguous. Recording the catalog number alongside the capacity makes the examples below identifiable without treating one supplier’s dimensions as a universal standard.

How a serum bottle is built

A crimp-finish container uses a bottle or vial, a compatible stopper and a seal. DWK’s workflow brochure explicitly describes its crimp-top finish as needing both the seal and stopper. This is a useful distinction when reading a bottle listing: the container description and the closure description are separate pieces of information.

For the WHEATON glass families in that brochure, serum bottles are made from molded glass, while serum vials are made from tubular glass. Both include clear and amber Type I borosilicate options. Consequently, the words bottle and vial can identify a manufacturing difference within a particular product family, rather than simply two names separated by a fixed volume threshold.

DWK describes its molded serum bottles as Type I borosilicate glass, with radiused corners and shoulders. It also states that the amber glass meets USP requirements for UV protection. Attribute those properties to that glass family; they do not describe polypropylene or HDPE serum bottles.

Types and variants of laboratory serum bottles

The following comparison separates manufacturer-described material and use differences. It is a reference to particular WHEATON families, not a ranking of materials or a claim that the listed applications are exclusive.

Type Stated application or feature Key difference and source
Clear molded glass Sample storage and lyophilization USP Type I borosilicate; DWK 2 mL product page
Amber molded glass UV protection meeting USP requirements Amber glass option; DWK molded serum bottle family
Polypropylene Diluent solutions Plastic bottle accepting rubber stoppers and aluminum seals; DWK polypropylene family
HDPE Animal-health products and nonmedical storage A separate plastic material; DWK Crimp/Serum Bottles & Vials flyer

Material selection is broader than the glass-versus-plastic label. Our comparison of glass and plastic laboratory containers provides related context; the named product’s own specification remains the basis for its stated capabilities.

Sizes and specifications that matter

The downloadable data table compares selected glass and plastic catalog examples using capacity, mouth outside diameter, body diameter and height. It combines individual glass product records with plastic dimensions from DWK’s flyer. It is a compilation of examples, not a complete current size range or a table of recommended filling volumes.

Capacity and mouth diameter

Capacity is expressed in millilitres; the closure dimension is expressed in millimetres. They cannot substitute for one another. DWK instructs users to select the nominal aluminum seal and stopper size using the bottle or vial’s mouth outside diameter, abbreviated OD. Inside diameter, abbreviated ID, describes the opening instead.

For example, the 20 mL glass bottle 223742 has a mouth ID of 13 mm and a mouth OD of 20 mm. Its listing specifies a 20 mm crimp neck. Reading the 13 mm opening as the seal size would confuse two measurements that the manufacturer lists separately.

Body dimensions and an illustrative comparison

Consider two catalog descriptions as an illustrative specification-reading exercise. W223712 is a 2 mL glass bottle with a 13 mm crimp finish and a body measuring 15.6 mm across by 36 mm high. Bottle 223742 is 20 mL and measures 32 mm across by 58 mm high, with a 20 mm crimp finish.

The second example has ten times the stated capacity, calculated as 20 ÷ 2. Its closure is identified by the separately stated 20 mm mouth OD. The arithmetic does not establish ten times the height, a proportional closure size or a permitted sample volume. This is why capacity, footprint and finish belong in separate specification fields.

How to choose using the stated specifications

Start with the manufacturer-described application and finish, then read the material and closure specifications together. DWK supplies a direct selection rule for nominal seal and stopper size: use mouth OD. That rule identifies a size; it does not establish that every stopper formulation with the same nominal diameter is interchangeable.

DWK’s crimp-container flyer lists different stopper styles, including straight-plug and lyophilization designs, and different rubber formulations. Treat style and material as additional identifiers rather than reducing the closure description to “rubber.” A nominal diameter alone does not reproduce those distinctions.

Stopper formulation and closure tools

The WHEATON product catalog illustrates why formulation matters. Its technical-data section describes gray bromobutyl / 46 as having low gas and vapor permeability but poor resistance to mineral oil and several classes of solvents. The same section describes black FKM / 55 as resistant to those oils and solvent classes, while advising against ketones. These are formulation-specific statements, not blanket compatibility claims for all rubber stoppers.

The catalog also flags dry natural rubber in several chlorobutyl/isoprene blend formulations. Neither stopper color nor the word “rubber” communicates that distinction. A specification that preserves the formulation name carries information that a generic material label loses.

Closure tools have their own descriptions. The catalog identifies crimpers for attaching aluminum seals and decappers for removing them, with separate listings for nominal sizes and seal styles. The tool, seal and stopper should therefore remain separately identifiable components in a container record. This describes the product system; it is not a procedure for assembling or opening a filled bottle.

For a freeze-drying application, DWK identifies its molded glass bottles as suitable for lyophilization and describes a designed bottom radius in the workflow brochure. Keep that stated application attached to the specified product. The same brochure distinguishes tubular vials from molded bottles, so a shared capacity label is not a complete description of either container.

DWK also lists its polypropylene serum bottle family as autoclavable. That is a property of the named product family, rather than a universal instruction for all plastic bottles. For storage involving very low temperatures, use the separate guide to cryogenic sample storage to understand the storage context; do not infer a cryogenic rating from the serum-bottle name.

Safe use and handling basics

DWK’s glassware-care guidance calls for inspection before use. Scratched, chipped, cracked or etched glassware should be taken out of use because damage weakens it. The guidance also warns against forcing a rubber bung into a glass neck and advises using the correct bung size.

For glassware exposed to changing temperatures, the manufacturer recommends gradual, uniform heating and cooling. Its general handling guidance advises supporting large bottles from the base and sides. Those precautions address handling and mechanical damage; they are not a sterilization cycle or a protocol for a filled, sealed serum bottle.

Pressure and vacuum require a separate assessment. DWK’s pressure-safety guidance says suitability depends on appropriate geometry and wall thickness and on explicit designation for the intended conditions. Follow the named product’s limits. A crimp finish, Type I glass description or lyophilization application does not itself supply a numerical pressure rating.

The same safety guidance states that a plastic coating does not improve a laboratory bottle’s pressure resistance. It also warns that pressure and temperature stresses can combine. A protective-looking exterior should therefore never be read as a substitute for the manufacturer’s designation of pressure or vacuum suitability.

Common mistakes when identifying serum bottles

  • Using the opening as the closure size. Keep ID and OD distinct. The manufacturer’s seal-size instruction refers to mouth OD.
  • Describing every bottle as glass. The polypropylene and HDPE examples show why the resin or glass specification belongs in the description.
  • Collapsing bottle and vial specifications. DWK distinguishes molded bottles from tubular vials; matching capacity does not capture that distinction.
  • Turning a stated application into a universal rating. Lyophilization suitability and pressure designation answer different questions.
  • Applying screw-cap advice to a crimp assembly. DWK’s care guidance discusses loosening screw caps during autoclaving. That statement is not an instruction for processing a sealed crimp-top bottle.

Sources

Data: Selected laboratory serum bottle dimensions

Original compilation of selected WHEATON glass and plastic bottle specifications from DWK individual product pages and its Crimp/Serum Bottles & Vials flyer. Capacity is the catalog value, not a recommended fill. Plastic dimensions exclude closures. Examples do not establish component interchangeability or a complete size range.

Selected laboratory serum bottle dimensions
Catalog numberMaterialCapacity (mL)Mouth outside diameter (mm)Body diameter (mm)Height (mm)Source URL
W223712Clear Type I borosilicate glass21315.636https://www.dwk.com/na/wheaton-serum-bottle-clear-2-ml-w223712
223742Clear Type I borosilicate glass20203258https://www.dwk.com/na/wheaton-serum-bottle-clear-20-ml-223742
224007Polypropylene3131738https://www.dwk.com/pub/media/mageplaza/resource/pdf/WHEATON-Crimp-Serum-Vials-Bottles-Flyer.pdf
224031HDPE15202856https://www.dwk.com/pub/media/mageplaza/resource/pdf/WHEATON-Crimp-Serum-Vials-Bottles-Flyer.pdf
224033HDPE30203267https://www.dwk.com/pub/media/mageplaza/resource/pdf/WHEATON-Crimp-Serum-Vials-Bottles-Flyer.pdf

Sources

Compiled by CASRAI from the sources above. Free to reuse under CC BY 4.0 with attribution.

Follow CASRAI

Research-administration guidance, standards updates and independent tool reviews.

Ask CASRAI · full access

Ask about Serum Bottles: Laboratory Types, Sizes and Closures

Full access: large monthly usage, up to 10 source passages behind each answer, and MCP and API access for Claude Code, Codex and other CLIs. Cancel any time.

An AI assistant for research: funder rules, compliance, methods and publishing. It links the sources behind its answers and labels answers that come from a web search.

Answers draw on CASRAI's guides and dictionary plus the federal and funder documents we index: Federal Register, Grants.gov, Regulations.gov and UKRI.

Works on this site and inside Claude, Cursor and the AI tools you already use.

Everything CASRAI publishes — this page, the dictionary, the guides and the news — stays open to read, with no account and no card.

Referenced across the research world

University of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logoUniversity of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logo
  • University of Cambridge logo
  • Columbia University logo
  • Crossref logo
  • University of Edinburgh logo
  • Harvard University logo
  • University of Oxford logo
  • Princeton University logo
  • Stanford School of Medicine logo
  • University College London logo
  • ORCID logo

View CASRAI adoption →