Skip to main content
v2026.11,986 entries · CC-BY 4.0
LAC HealthSponsored

Shop tube racks supplies

  • FDA registered
  • ISO 13485
  • BBB Accredited A+

Shop at LAC Health

What Are Tube Racks? Types, Materials and Sizes

Tube racks explained: upright polypropylene vs floating foam racks, how to read tube size, positions and autoclavable flags on a spec line.

Written and maintained by CASRAI Editorial Board

Published

On this page

A tube rack is a laboratory holder that keeps tubes upright, or afloat, so they can be loaded, moved and stored without tipping. People searching for one usually need to answer two questions: which kind holds my tubes, and can it go in the autoclave or water bath? This page explains the two main kinds, what they are made of, and how to read a rack’s specification line.

What a tube rack is

A tube rack holds laboratory tubes (test tubes, centrifuge tubes or microcentrifuge tubes) in a fixed layout. It is used by bench scientists, technicians and students for sample handling, and by buyers who stock consumables. It is a support accessory, not a measuring device, so the useful facts are its material, its tube fit and its heat limits.

How racks are built and what they are made of

Two constructions cover most of what a lab buys, and the manufacturer listings show how different they are.

  • Molded polypropylene racks. Thermo Fisher describes its Nalgene Unwire rack (catalog number 5976-0513) as polypropylene, with a one-piece molded design intended to hold a full load of test tubes or centrifuge tubes.
  • Closed-cell foam racks. U.S. Scientific describes its 24-place floating foam rack (9138-7510) as high-density polyethylene foam that floats in water baths, tubs or beakers, and notes that it resists water absorption so it can be washed and reused.

Types and variants

Type Typical use Key difference (as listed)
Upright molded rack (polypropylene) Holding test or centrifuge tubes in a grid on the bench Listed by tube diameter and grid layout; the Nalgene Unwire 5976-0513 is 13 mm, 72 positions, 6 x 12, and is listed as not autoclavable
Floating foam rack (HDPE foam) Keeping small tubes in a water bath, tub or beaker Floats; listed by tube volume (up to 24 tubes of 1.5 mL or 2.0 mL for 9138-7510) and has two handles

What is a floating rack?

A floating rack is a foam rack that stays on the surface of water so the tubes it holds sit in the bath. According to U.S. Scientific, its closed-cell HDPE foam version is rectangular, has two handles, and holds up to 24 microcentrifuge-size tubes.

Specifications that matter

Specification What it tells you Example from a listing
Tube size Diameter (upright racks) or volume (floating racks) the positions are made for 13 mm (Thermo 5976-0513); 1.5 mL or 2.0 mL (U.S. Scientific 9138-7510)
Positions and array How many tubes fit and in what grid 72 positions, 6 x 12 (5976-0513); 24 places (9138-7510)
Material What the rack is made from, which affects heat and washing Polypropylene (5976-0513); HDPE foam (9138-7510)
Autoclavable flag Whether the manufacturer lists the rack as able to be steam sterilized “Not Autoclavable” (5976-0513)

How to choose

Only criteria that appear in the listings are used here.

  • Match the tube: the listing names the tube diameter or volume the positions are made for.
  • Read the autoclavable line for the specific catalog number. The same polypropylene resin family does not guarantee the same limits across products, and the Thermo listing for 5976-0513 says “Not Autoclavable”.
  • For water-bath work, choose a rack the listing describes as floating, as with the U.S. Scientific HDPE foam rack.

Safe use and handling basics

  • Follow the manufacturer’s listed temperature and sterilization statement for the exact product before heating or autoclaving.
  • Foam racks are described as washable and reusable; clean them according to the manufacturer’s care instructions and your lab’s own cleaning procedure.
  • Racks are reusable consumables; see reusable consumables for how that category is defined on this site.

Common mistakes

  • Assuming a rack can be autoclaved because it is plastic. One manufacturer lists a polypropylene rack as not autoclavable.
  • Choosing by number of positions alone and ignoring tube diameter or volume.
  • Using an upright rack where a floating rack is needed, or the reverse.

Racks are sized to the tubes they carry. See conical centrifuge tubes, cryovials, centrifuge rotors and the comparison polypropylene vs polystyrene.

FAQ

What is a floating rack?

A rack made of closed-cell foam that floats on water so tubes can sit in a water bath, tub or beaker. See the types table above.

Are tube racks autoclavable?

It depends on the product. The Thermo Fisher Nalgene Unwire polypropylene rack 5976-0513 is listed as not autoclavable, so check the listing for each catalog number.

Sources

Follow CASRAI

Research-administration guidance, standards updates and independent tool reviews.

Ask CASRAI · free to try

Ask about What Are Tube Racks? Types, Materials and Sizes

2 free questions a day, no account.

An AI assistant for research: funder rules, compliance, methods and publishing. It links the sources behind its answers and labels answers that come from a web search.

Answers draw on CASRAI's guides and dictionary plus the federal and funder documents we index: Federal Register, Grants.gov, Regulations.gov and UKRI.

Works on this site and inside Claude, Cursor and the AI tools you already use.

Everything CASRAI publishes — this page, the dictionary, the guides and the news — stays open to read, with no account and no card.

Referenced across the research world

University of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logoUniversity of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logo
  • University of Cambridge logo
  • Columbia University logo
  • Crossref logo
  • University of Edinburgh logo
  • Harvard University logo
  • University of Oxford logo
  • Princeton University logo
  • Stanford School of Medicine logo
  • University College London logo
  • ORCID logo

View CASRAI adoption →