Written and maintained by CASRAI Editorial Board
Published · Last updated
This page describes products and general use; it is not medical advice.
On this page
Steri-Strips look like thin, narrow adhesive strips, coated on one side with pressure-sensitive adhesive, that come as flat strips packed in a sterile envelope. “Steri-Strip” is a 3M brand name; regulators file the product class under skin-closure adhesive strip. This guide shows how to recognise one from what a registry record or pack label states, and how to read the codes on it. Typical readers are clinic staff, buyers and students.
What do Steri-Strips look like?
The GMDN term for the class (code 32207, “Skin-closure adhesive strip”) describes the device as “a small, narrow flexible band (of fabric, plastic, paper, or other material) coated on one side with a pressure-sensitive adhesive, used to approximate the edges of superficial wounds.” It adds that the device may be hypoallergenic and/or waterproof, and is single-use (NLM AccessGUDID).
In the catalog records, the strips are long and narrow: the Blend Tone line is listed as Tan, in widths of 1/4 in (6 mm) and 1/2 in (12 mm) and lengths from 2 in (50 mm) to 4 in (100 mm). A consumer-health source, Healthline, describes them as thin adhesive bandages (Healthline). The catalog records state a colour only for the Blend Tone line, so this page gives no colour for the other lines.
Straight strips versus butterfly shape
Healthline notes that Steri-Strips are also called butterfly stitches or butterfly bandages when they are thin in the middle with two wide, sticky ends. The catalog records do not state a shape. For the butterfly form, its regulatory status and the name overlap, see butterfly closure. For a different branded strip, see Clozex skin closure.
Colour, size and strips per envelope
These rows come from AccessGUDID and openFDA UDI device descriptions (checked 2026-11-03). Each description encodes the catalog code, the product line, a colour word where one is stated, the size in inches and millimetres, and the count per envelope.
| Catalog code | Product line (record text) | Colour word | Size | Count per envelope |
|---|---|---|---|---|
| W8512 | Wound Closure System | not stated | 1-7/8 in x 1/2 in (47 mm x 12 mm) | 1 strip |
| B1551 | Blend Tone Skin Closures | Tan | 1/4 in x 3 in (6 mm x 75 mm) | 3 strips |
| B1559 | Blend Tone Skin Closures | Tan | 1/2 in x 2 in (12 mm x 50 mm) | 6 strips |
| B1557 | Blend Tone Skin Closures | Tan | 1/2 in x 4 in (12 mm x 100 mm) | 6 strips |
For the full catalog including reinforced and other lines, see 3M Steri-Strip: types, sizes and catalog codes.
What do Steri-Strips do?
By regulator wording, a skin-closure strip holds the edges of the skin together. The FDA regulation for medical adhesive tapes and adhesive bandages, 21 CFR 880.5240, describes devices “used to cover and protect wounds, to hold together the skin edges of a wound, to support an injured part of the body, or to secure objects to the skin” (21 CFR 880.5240). The GMDN definition above uses “approximate the edges of superficial wounds”. How a product is used on a patient is a clinical decision for the treating clinician and the manufacturer’s instructions for use. Related pages: what is a suture, surgical glue names, what is medical tape.
How it is built
The GMDN definition (code 32207, shown in NLM AccessGUDID) describes a small, narrow flexible band of fabric, plastic, paper or other material, coated on one side with a pressure-sensitive adhesive. It adds that the device may be hypoallergenic and/or waterproof. Beyond that definition, the records do not list materials or parts for each catalog code; the pack label for a given code is the place to look.
Types and variants
openFDA and AccessGUDID records separate these entries. 21 CFR 880.5240 classifies the device as Class I (general controls).
| Type | Typical use (as the record states it) | Key difference |
|---|---|---|
| Product code FPX, “Strip, Adhesive, Closure, Skin” | Regulatory class for skin-closure adhesive strips | Device class 1, regulation 880.5240 (openFDA classification) |
| Product code KGX, “Tape and bandage, adhesive” | Class under which the W8512 record sits | Class 1, regulation 880.5240, premarket notification exempt (openFDA) |
| Blend Tone Skin Closures (B1551, B1557, B1559) | Skin closure strips listed in the UDI records | Colour word Tan; 1/4 in x 3 in (3 strips) or 1/2 in x 2 in and 1/2 in x 4 in (6 strips each) |
| Wound Closure System (W8512) | Skin closure strip listed in AccessGUDID and openFDA UDI | 1-7/8 in x 1/2 in, 1 strip; no colour word stated; packaged sterile, single-use, labeled no natural rubber latex |
What to check on the pack
- The catalog code, not the nickname: it identifies the line, size and count per envelope.
- “Sterile” packaging: the W8512 record states packaged sterile, with no sterilization needed before use.
- Single use: the record for W8512 states single-use true; the GMDN definition says the class is single-use.
- The latex statement is per record: W8512 is labeled no natural rubber latex; read the statement for the exact code you hold rather than assuming it for the line.
Safe use and handling basics
This page gives no clinical instructions. The records state that the W8512 pack is sterile and single-use, and the latex statement is recorded per catalog code. Manufacturer instructions for use and the treating clinician govern any use on a patient.
How to choose
Choosing is a matter for the clinician or the purchasing policy of the facility. From the data alone, the differences you can compare are the catalog code, the size in inches and millimetres, the colour word where stated, and the count per envelope, as in the table above.
Common mistakes
- Treating “Steri-Strip” as a generic name. It is a brand; the regulatory class is skin-closure adhesive strip, and other brands exist.
- Assuming a colour or size from the name. Read the code and the size line in the record.
- Confusing the count: one envelope may hold one, three or six strips, depending on the code.
Frequently asked questions
What do Steri Strips look like?
They are narrow adhesive strips, coated on one side, packed flat in a sterile envelope. Catalog records list Blend Tone strips as tan, from 1/4 in x 3 in to 1/2 in x 4 in.
What do Steri-Strips do?
The class is defined as holding or approximating the edges of superficial wounds (GMDN 32207; 21 CFR 880.5240). Use in a patient is a clinician’s decision.
Are Steri-Strips the same as butterfly closures?
Not necessarily. Some closures are butterfly-shaped, while Steri-Strip is a brand name for adhesive closure strips. See the butterfly closure guide linked above.
Are they sterile and single-use?
The W8512 record states packaged sterile and single-use, and the GMDN class definition says single-use. The label for each code carries the exact statement.
Sources
All sources below were checked on 2026-11-03.
- NLM AccessGUDID record 30707387792924: https://accessgudid.nlm.nih.gov/devices/30707387792924 (includes GMDN term 32207).
- openFDA device UDI (B1551, B1557, B1559): https://api.fda.gov/device/udi.json
- openFDA device classification, product code FPX: https://api.fda.gov/device/classification.json
- 21 CFR 880.5240: https://www.law.cornell.edu/cfr/text/21/880.5240
- Healthline, “Steri-Strips” (appearance description only): https://www.healthline.com/health/steri-strips







