Written and maintained by CASRAI Editorial Board
Published
This page describes products and general use; it is not medical advice.
On this page
A Babcock clamp is a hand-held surgical instrument, more often called Babcock forceps, that grasps and holds delicate tissue without crushing it. The ICRC/IFRC standard products catalogue describes it as an “atraumatic clamp used to hold delicate structures during operations.” Who uses it: surgical teams, and the sterile-processing staff, buyers and students who handle, stock or study surgical instrument sets.
What it is
“Babcock clamp” and “Babcock forceps” name the same instrument. The humanitarian catalogue lists it under the item name “Forceps, soft tissue, Babcock” and classes it as gripping forceps with an atraumatic design. Its purpose is holding soft structures during an operation while limiting damage to them. It belongs with other manual instruments such as the hemostat and the scalpel, but unlike a scalpel it does not cut.
How it is built
- Material: the ICRC/IFRC catalogue specifies martensitic steel, described as quenched, magnetic steel.
- Locking mechanism: a lockable spring ratchet, described in the catalogue as a “soft” lock, holds the jaws closed so the user does not need to maintain grip pressure.
- Atraumatic design: the catalogue lists the design as atraumatic, meaning it is intended for holding tissue rather than crushing or tearing it.
Types and variants
The catalogue lists two standard Babcock sizes. Other manufacturers sell other lengths, so always read the specification of the exact product.
| Catalogue item | Overall length | Jaw width | Source |
|---|---|---|---|
| Forceps, tissue, Babcock, standard (XSINMEDI501016) | 16 cm | 9 mm | ICRC/IFRC catalogue |
| Forceps, tissue, Babcock, standard (XSINMEDI501020) | 20 cm | 11 mm | ICRC/IFRC catalogue |
The catalogue entry was last updated on 2018-12-31 and is marked as no longer updated, so treat the table as a reference example of a standardised procurement specification, not as a current product listing.
Regulatory class in the United States
Under 21 CFR 878.4800, “a manual surgical instrument for general use is a nonpowered, hand-held, or hand manipulated device.” That regulation places such instruments in Class I (general controls) and exempts them from premarket notification (510(k)) subject to the limitations in 21 CFR 878.9. The regulation does not name the Babcock specifically, and instruments intended for a specialty are classified under other parts of 21 CFR 868 to 892. Check the manufacturer’s labelling and the FDA classification record for a given product to see how it is classified.
Common mistakes
- Treating “clamp” and “forceps” as different instruments here: both names refer to the same Babcock design.
- Assuming every Babcock has the same dimensions: the two catalogue sizes above differ in both length and jaw width.
- Reading a regulation as listing a named instrument when it only describes the general category.
FAQ
Is a Babcock clamp the same as Babcock forceps?
Yes. The ICRC/IFRC catalogue uses the name “Forceps, soft tissue, Babcock” for the instrument it describes as an atraumatic clamp.
What is a Babcock clamp used for?
Holding delicate structures during operations, according to the ICRC/IFRC catalogue. Selection and use are decisions for the surgical team under the manufacturer’s instructions for use.
What sizes does it come in?
The catalogue lists 16 cm with 9 mm jaws and 20 cm with 11 mm jaws. Other suppliers may list other sizes.
Is it a regulated medical device?
General-use manual surgical instruments fall under 21 CFR 878.4800 as Class I devices, generally exempt from 510(k), subject to the limits in 21 CFR 878.9.
Related instrument guides
For comparable hand instruments see Gerald forceps, the Doyen clamp and the chalazion clamp.
Sources
- ICRC/IFRC Standard Products Catalogue, “Forceps, soft tissue, Babcock”, itemscatalogue.redcross.int, read 2026-11-08.
- 21 CFR 878.4800, eCFR, read 2026-11-08.







