Skip to main content
v2026.11,986 entries · CC-BY 4.0
LAC HealthSponsored

Shop rubber dam forceps supplies

  • FDA registered
  • ISO 13485
  • BBB Accredited A+

Shop at LAC Health

Rubber Dam Forceps: What They Are and the Standard Behind Them

Rubber dam forceps carry the clamp to the tooth. FDA code EJG, Class I, 21 CFR 872.6300 and ISO 16635-2 explained, plus how they differ from the other parts.

Written and maintained by CASRAI Editorial Board

Published · Last updated

This page describes products and general use; it is not medical advice.

On this page

Rubber dam forceps are the dental instrument used to carry a rubber dam clamp to a tooth. In US regulation they are a named part of the rubber dam device family, and a dedicated international standard covers them. Dental staff, buyers and students will find below what the instrument is, how it relates to the other rubber dam parts, and which identifiers to look for in a product listing.

What are rubber dam forceps?

Rubber dam forceps, formally “clamp forceps”, are the hand instrument that holds a rubber dam clamp so it can be carried to a tooth. ISO 16635-2:2014 describes them as “clamp forceps intended for the application of dental rubber dam clamps to teeth.” The rubber dam itself is, in the FDA regulation’s words, “a thin sheet of latex with a hole in the center” used “to isolate a tooth from fluids in the mouth during dental procedures, such as filling a cavity preparation.” Who uses them: dentists and dental assistants working with a rubber dam.

For the sheet, clamp and frame, see what a rubber dam is and the rubber dam frame. For a latex-free sheet, see latex-free dental dam. This page covers only the forceps.

How do rubber dam forceps relate to the other rubber dam parts?

The FDA regulation names four parts in one device: the rubber dam, the rubber dam clamp, the rubber dam frame, and the forceps for a rubber dam clamp. The forceps are the part that handles the clamp; they are separate from the sheet and from the frame.

Part What it is Source
Rubber dam A thin sheet of latex with a hole in the center 21 CFR 872.6300
Rubber dam clamp A named component of the device 21 CFR 872.6300
Rubber dam frame A named component of the device 21 CFR 872.6300
Forceps for a rubber dam clamp The instrument covered on this page; FDA device name “Forceps, Rubber Dam Clamp” 21 CFR 872.6300; FDA Product Classification, code EJG

What is the regulatory status and the ISO standard?

Under 21 CFR 872.6300, “rubber dam and accessories” include “the rubber dam, rubber dam clamp, rubber dam frame, and forceps for a rubber dam clamp”. The forceps are therefore not an unregulated accessory: FDA lists them under their own product code.

Identifier Value Source
FDA device name Forceps, Rubber Dam Clamp FDA Product Classification, code EJG
Product code EJG FDA Product Classification
Regulation 21 CFR 872.6300 eCFR
Device class Class I (general controls) eCFR; FDA Product Classification
Premarket notification 510(k) exempt, subject to the limitations in 21 CFR 872.9 eCFR; FDA Product Classification
Review panel Dental FDA Product Classification
International standard ISO 16635-2:2014, Dentistry: Dental rubber dam instruments, Part 2: Clamp forceps (edition 1, last reviewed and confirmed 2025) ISO

How do you read a product listing for rubber dam forceps?

Four identifiers are useful for checking a listing: the FDA device name “Forceps, Rubber Dam Clamp”, product code EJG, regulation number 872.6300, and a reference to ISO 16635-2. Under 21 CFR 872.6300, if the device is not labeled or otherwise represented as sterile, it is exempt from the quality management system requirements in 21 CFR part 820, except for requirements concerning records and complaint files under 21 CFR 820.35. A listing that calls these clamp forceps is describing the same instrument whatever the brand name. Browse forceps for the wider instrument category. For cleaning and reprocessing of a specific instrument, follow the manufacturer’s instructions for use.

Common mistakes

  • Treating the forceps as a general-purpose instrument. They are a separate classified device (EJG) intended for rubber dam clamps; the wider clamp family is covered in types of surgical clamps.
  • Mixing up the parts. The sheet, clamp, frame and forceps are four named parts of one regulated device family.

Frequently asked questions

What are rubber dam forceps used for?

They hold a rubber dam clamp so it can be carried to a tooth. ISO 16635-2:2014 describes clamp forceps as “intended for the application of dental rubber dam clamps to teeth.”

What is the FDA product code for rubber dam forceps?

EJG, device name “Forceps, Rubber Dam Clamp”, regulated under 21 CFR 872.6300 as Class I and exempt from 510(k) premarket notification, subject to 21 CFR 872.9.

Is there an international standard for them?

Yes. ISO 16635-2:2014, “Dentistry: Dental rubber dam instruments, Part 2: Clamp forceps”, is the dedicated standard; ISO lists it as edition 1, last reviewed and confirmed in 2025.

Are rubber dam forceps part of the rubber dam device?

Yes. The FDA identification of “rubber dam and accessories” includes the forceps for a rubber dam clamp alongside the dam, clamp and frame.

Sources

Follow CASRAI

Research-administration guidance, standards updates and independent tool reviews.

Ask CASRAI · free to try

Ask about Rubber Dam Forceps: What They Are and the Standard Behind Them

2 free questions a day, no account.

An AI assistant for research: funder rules, compliance, methods and publishing. It links the sources behind its answers and labels answers that come from a web search.

Answers draw on CASRAI's guides and dictionary plus the federal and funder documents we index: Federal Register, Grants.gov, Regulations.gov and UKRI.

Works on this site and inside Claude, Cursor and the AI tools you already use.

Everything CASRAI publishes — this page, the dictionary, the guides and the news — stays open to read, with no account and no card.

Referenced across the research world

University of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logoUniversity of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logo
  • University of Cambridge logo
  • Columbia University logo
  • Crossref logo
  • University of Edinburgh logo
  • Harvard University logo
  • University of Oxford logo
  • Princeton University logo
  • Stanford School of Medicine logo
  • University College London logo
  • ORCID logo

View CASRAI adoption →