Written and maintained by CASRAI Editorial Board
Published
On this page
A glass dropper pipette, also called a glass Pasteur pipette, is a small glass tube drawn down to a narrow tip that is usually fitted with a rubber bulb and used to move small amounts of liquid a few drops at a time. It is a transfer tool, not a measuring device: it is used to add reagent drop by drop or to move liquid between containers, not to deliver an exact volume.
The phrase covers two different things in search results. This page is about the laboratory glass pipette (a stand-alone tube with a separate bulb). A dropper bottle or dropper assembly, where the bulb and tube form the cap of a bottle, is a different item, and the plastic one-piece version is covered in what a Beral pipette is. Who uses it: researchers and laboratory staff doing small-volume transfers, microscale work and routine bench additions.
What a glass dropper pipette is
An eye dropper, also called a Pasteur pipette or simply a dropper, is a device for transferring small quantities of liquid. The commonly recognised form is a glass tube tapered to a narrow point and fitted with a rubber bulb at the top, and the combination of pipette and bulb has also been called a teat pipette (Wikipedia, Eye dropper). The name comes from Louis Pasteur, who used a variant extensively in his research, although the same article marks the invention claim as needing a citation, so this page does not rely on it.
In the laboratory the glass version is valued for one reason in particular: the tube is glass, so it tolerates chemicals that would soften or dissolve a plastic dropper. It is also cheap enough that many laboratories treat it as a consumable. Where a general overview of all pipette families is needed, see what a pipette is; for the adjustable, calibrated instruments that actually measure volume, see what a micropipette is.
How it is built: glass, tip and constriction
The body is a straight glass tube that narrows to a capillary tip. Traditionally, glass Pasteur pipettes were made by heating lengths of glass tubing over a flame and drawing them apart to form a long capillary; the capillary was heated again and divided, producing two pipettes (Wikipedia, Eye dropper). Modern laboratory pipettes are sold ready-made, and the manufacturer listing described below shows what a current product specifies.
Fisherbrand disposable borosilicate glass Pasteur pipets (catalogue numbers 1367820A to 1367820D, as listed by Thermo Fisher Scientific) are described with these features: borosilicate glass, square-cut ends, a constriction near the top, tips held to close diameter tolerances, a stated 2 mL volume, non-sterile supply, a disposable limited-use designation, and ASTM E732 shown under certifications and compliance. The listing says plugs are not supplied, which means the pipette is sold unplugged. The constriction near the top is there, according to the same listing, so that a plug does not slip into the pipette body.
That constriction matters because a cotton plug is one of the ways the pipette is adapted in the laboratory. Plugging the larger, upper opening with cotton or glass wool lets a solution pass through while insoluble material is held back, and a rubber bulb can add pressure if gravity is not enough (Wikipedia, Eye dropper). A pipette drawn out over a flame can also serve as a spotter for thin-layer chromatography, according to the same article.
Types and variants
Glass dropper pipettes differ mainly by glass type, by whether they carry a plug and by how they are used. The comparison below sets the glass Pasteur pipette against its nearest relatives. The data table further down the page lists the sourced catalogue sizes.
| Type | Typical use | Key difference |
|---|---|---|
| Borosilicate glass Pasteur pipette | General laboratory transfers and microscale work | Borosilicate can withstand the chemicals and temperatures used in most laboratories (Wikipedia, Eye dropper); the Thermo Fisher listing is for borosilicate, unplugged, non-sterile |
| Soda-lime glass Pasteur pipette | Inexpensive apparatus | Not as chemically resistant as borosilicate, but suitable for inexpensive items such as the Pasteur pipette (Wikipedia, Eye dropper) |
| Plastic Pasteur (transfer) pipette | Biology work where media are aqueous and solvent resistance is not needed; often discarded after one use | Stem and bulb are one piece of soft plastic; most organic solvents such as hexane and acetone cannot be used because the solvent can dissolve the plastic (Wikipedia, Eye dropper). See transfer pipettes |
Borosilicate versus soda-lime glass
The two glass types usually found in laboratories and in Pasteur pipettes are borosilicate and soda-lime. Borosilicate is widely used for laboratory apparatus because it can withstand the chemicals and temperatures used in most laboratories; soda-lime is less chemically resistant but cheap, which suits a single-use item. If the product description does not name the glass, the glass type is not known, and a pipette that will contact aggressive reagents should not be assumed to be borosilicate.
Plugged and unplugged pipettes
A plug is a small wad of cotton or glass wool in the upper opening. The Thermo Fisher listing states that its pipets are supplied without plugs. The pipette is therefore a plain tube until the user adds a plug for filtration.
Glass pipette versus bottle dropper
A bottle dropper assembly stays with the bottle it closes. A laboratory Pasteur pipette is a separate, mostly disposable tube that is paired with a bulb each time it is used. They both put out liquid in drops, but they are bought, handled and disposed of differently, and results that mix the two are the reason the phrase is ambiguous.
Sizes and specifications that matter
Only a few specifications are stated in the listing read for this page. Length, volume designation and quantity per case are the ones that change between catalogue entries. The table in the data section below lists the four catalogue numbers by length and case quantity. The common specifications for the 14.6 cm items are a 2 mL volume, borosilicate glass and non-sterile supply.
The 2 mL figure is a capacity designation for the item, not a measuring accuracy. Wikipedia notes that droppers are not designed to measure a specific volume and that each type is designed to produce a specific drop volume, but not precisely; it should not be used where high accuracy is needed, only to add drops of reagent. Where a defined volume must be delivered, the laboratory needs a calibrated pipette instead.
How to choose between glass and alternatives
The sources give a small number of criteria, and they are the ones to apply.
- Chemical compatibility. A plastic dropper can be dissolved by organic solvents such as hexane and acetone, which is the reason glass is used for those liquids (Wikipedia, Eye dropper).
- Containment level. At UCLA, glass pipettes may not be used in BSL2, BSL2+ and BSL3 laboratories unless their use is scientifically justified, and plastic aspirator pipettes or plastic Pasteur pipettes are named as substitutes (UCLA Institutional Biosafety Committee policy, revised 15 June 2023). Another institution’s rule may differ, so the local biosafety committee decides.
- Exposure to proteins or cells. Plastic droppers can reduce the loss of cells or protein that binds to glass (Wikipedia, Eye dropper).
- Accuracy. Droppers are not chosen for volume accuracy; they add drops or move liquid.
- Intended use of the product. The Thermo Fisher site states that its products are not for human or animal clinical diagnosis or treatment, so a laboratory pipette is not a substitute for a pharmacy or medical dropper.
Safe use and handling basics
Never pipette by mouth
Before rubber bulbs, liquid was drawn up by mouth suction, and today mouth pipetting is either strongly discouraged or forbidden (Wikipedia, Eye dropper). For blood or other potentially infectious materials, the OSHA bloodborne pathogens standard states that mouth pipetting or suctioning is prohibited (29 CFR 1910.1030(d)(2)(xii)).
Glass in biosafety settings
The UCLA policy gives the reason as well as the rule: broken contaminated glass is both an injury risk and an exposure risk. Where glass is still needed, for example the electrophysiology work the policy names as a commonly approved exception, the researcher files a deviation request with the Institutional Biosafety Committee, and the use and its scientific justification are documented in the Biological Use Authorization. A request describes the reason for glass; it is not a general permission.
Check the tip and keep liquid out of the bulb
Before use the tip should be examined for cracks. If the solution overshoots into the bulb, the bulb can contaminate it, and the pipette can be rinsed with the reagent to improve accuracy (Wikipedia, Eye dropper). To dispense, the tip is held against the side of the receiving container at roughly 30 to 45 degrees, according to the same article.
Reuse and disposal
Glass droppers are generally cheap enough to be disposable, but as long as the glass point is not chipped a dropper can be washed and reused (Wikipedia, Eye dropper). The Thermo Fisher product is listed as disposable and limited-use, so follow the product label. Broken pipettes belong in a glassware disposal container, and the site’s guide to sharps disposal in laboratories covers the wider regulatory picture for sharp waste.
Common mistakes
- Treating the dropper as a measuring tool. The 2 mL listing is a capacity designation and drop size is approximate.
- Using a plastic dropper with strong organic solvents. The plastic can dissolve.
- Using a chipped or cracked tip. Examine it before use; a chipped glass point also removes the case for reuse.
- Letting liquid reach the bulb. The bulb can contaminate the next draw.
- Assuming glass is allowed everywhere. Some institutions restrict it at higher biosafety levels.
- Buying a bottle dropper when a pipette is needed, or the reverse. They are different items even though both give drops.
Sources
- Thermo Fisher Scientific: Fisherbrand Disposable Borosilicate Glass Pasteur Pipets, 1367820B, checked 2026-11-17
- UCLA Research Administration and Research Compliance: Use of glass pipettes (Institutional Biosafety Committee policy), checked 2026-11-17
- Legal Information Institute (Cornell Law School): 29 CFR 1910.1030, Bloodborne pathogens, checked 2026-11-17
- Wikipedia: Eye dropper (Pasteur pipette), checked 2026-11-17
Data: Fisherbrand disposable borosilicate glass Pasteur pipets: catalogue entries by length and case quantity
Four catalogue entries (1367820A to 1367820D) for one family of disposable borosilicate glass Pasteur pipets, compiled from the manufacturer's product listing. Each row gives the pipet length in centimetres and the number of pipets supplied per case. The family is listed with a 2 mL volume, borosilicate glass, square-cut ends, a constriction near the top and no plugs supplied.
| Catalogue number | Length (cm) | Quantity per case (pipets) |
|---|---|---|
| 1367820A | 14.6 | 720 |
| 1367820B | 14.6 | 1440 |
| 1367820C | 22.86 | 720 |
| 1367820D | 22.86 | 1440 |
Sources
- Thermo Fisher Scientific: Fisherbrand Disposable Borosilicate Glass Pasteur Pipets 1367820B (accessed 2026-11-17)
- Thermo Fisher Scientific: Fisherbrand Disposable Borosilicate Glass Pasteur Pipets 1367820A (accessed 2026-11-17)
Compiled by CASRAI from the sources above. Free to reuse under CC BY 4.0 with attribution.







