Skip to main content
v2026.11,986 entries · CC-BY 4.0
LAC HealthSponsored

Shop intradermal needle supplies

  • FDA registered
  • ISO 13485
  • BBB Accredited A+

Shop at LAC Health

What Is an Intradermal Needle? Bevel, Gauge and FDA Class

Intradermal needle explained: FDA Class II hypodermic needle, intradermal bevel, 26-27 G x 3/8 in examples and how to read a product listing.

Written and maintained by CASRAI Editorial Board

Published

This page describes products and general use; it is not medical advice.

On this page

An intradermal needle is a hypodermic needle labelled for injection into the skin itself, usually identified by a short length (for example 3/8 in), a fine gauge and an “intradermal” bevel. Clinic staff, supply buyers and students use this page to read a product listing correctly and to see where these needles sit in FDA device regulation.

What is an intradermal needle?

“Intradermal” describes a labelling and bevel designation, not a separate regulatory device type. The FDA regulates hypodermic single lumen needles under 21 CFR 880.5570 as devices “intended to inject fluids into, or withdraw fluids from, parts of the body below the surface of the skin.” The regulation describes a sharpened metal tube with a female hub that connects to the male nozzle of a syringe or an administration set. These needles are Class II (performance standards).

In the FDA classification database (openFDA, read 12 November 2026) the matching product code is FMI, “Needle, Hypodermic, Single Lumen”, class 2, regulation 880.5570, General Hospital panel. Two other codes sit under the same regulation: NKK (reprocessed) and QNS (low dead space). No separate product code for “intradermal” was found; the word appears in manufacturer product descriptions.

Who uses it: clinical staff in settings such as allergy and tuberculosis-testing services, and the buyers who stock those settings.

How it is built

Per 21 CFR 880.5570, the needle is a sharpened metal tube (the cannula) fitted to a hub. The hub is what mates with a syringe or administration set. Manufacturer listings add further features:

  • Bevel: the angled cut at the tip. Manufacturers such as BD label some products with an “intradermal bevel”. The bevel angle is not given in the sources read for this page.
  • Gauge and length: printed on the listing, for example 26 G x 3/8 in. 3/8 in is about 9.5 mm (3/8 x 25.4 = 9.525).
  • Safety-engineered shielding: some intradermal products add a shield that covers the needle after use. See retractable syringes for the related mechanism.

Types and variants

Type What the source says Source
Fixed-needle syringe with intradermal bevel BD allergist tray syringe, SKU 305951: 1 mL, needle permanently attached, hypodermic, single-use, with a safety-engineered shielding mechanism and a clear hub BD product page
Tuberculin syringe with intradermal bevel BD SafetyGlide tuberculin 303327: 1 mL, 27 G x 3/8 in, intradermal bevel (see tuberculin needles) BD product page, checked 1 November 2026
Stand-alone sterile needle An AccessGUDID record describes “sterile, disposable surgical stainless steel intradermal needles”, 5 needles in foam per sealed bulk package, box of 50, prescription-only openFDA UDI database

The openFDA UDI database returned 37 records matching “intradermal” in the device description (updated 2 November 2026), so intradermal needles are listed both as stand-alone needles and as part of syringes.

Sizes and specifications

Product Gauge Length Volume
BD allergist tray syringe 305951 26 G 3/8 in (about 9.5 mm) 1 mL
BD SafetyGlide tuberculin 303327 27 G 3/8 in (about 9.5 mm) 1 mL

These are two manufacturer configurations, not a standard size range. Other manufacturers and listings differ.

How to read a listing before buying

Only criteria that appear in the sources are listed here.

  • Needle attachment: the BD allergy syringe has a permanently attached needle; a stand-alone needle connects through its hub. A UDI record or product page states which.
  • Bevel label: check whether the listing says “intradermal bevel” rather than assuming it from the product name.
  • Safety feature: BD lists a safety-engineered shielding mechanism on 305951; other listings may not.
  • Sterility and prescription status: the AccessGUDID record shows sterile and prescription-only fields.
  • Instructions for use: BD links an electronic IFU (eifu.bd.com) from the product page.

For allergy-clinic stocking context, see the allergy clinic supply checklist.

Safe use and handling basics

  • BD describes the allergy syringe as single-use and disposable; single-use devices are not reused.
  • Follow the manufacturer’s instructions for use for activating any safety shield.
  • Technique, site and angle belong to clinical training and the product IFU, and are not covered here.

Related: subcutaneous syringes and the ISO 11608 needle-based injection systems standard.

Common mistakes

  • Treating “intradermal” as a regulatory class. The regulation (21 CFR 880.5570) covers hypodermic single lumen needles generally.
  • Assuming a gauge or length from the bevel label. 26 G and 27 G are both shown above with the same 3/8 in length.
  • Assuming every intradermal listing includes a safety mechanism; check the product page.

FAQ

Is an intradermal needle a different FDA device?

No separate product code was found. Hypodermic single lumen needles are Class II under 21 CFR 880.5570 (product code FMI); “intradermal” appears in manufacturer descriptions.

What size is an intradermal needle?

It varies by product. Two BD examples are 26 G x 3/8 in (allergist tray syringe) and 27 G x 3/8 in (tuberculin syringe).

Does it come attached to a syringe?

Both forms exist: BD lists a permanently attached needle on the 305951 allergy syringe, and UDI records show stand-alone intradermal needles.

Sources

  • 21 CFR 880.5570, hypodermic single lumen needle, Cornell LII, read 12 November 2026: https://www.law.cornell.edu/cfr/text/21/880.5570
  • openFDA device classification, product code FMI, read 12 November 2026: https://api.fda.gov/device/classification.json?search=product_code:FMI
  • openFDA/AccessGUDID UDI records for “intradermal”, read 12 November 2026: https://api.fda.gov/device/udi.json?search=device_description:intradermal
  • BD product page, SKU 305951, read 12 November 2026: https://www.bd.com/en-ca/products-and-solutions/products/product-page.305951

Follow CASRAI

Research-administration guidance, standards updates and independent tool reviews.

Ask CASRAI · free to try

Ask about What Is an Intradermal Needle? Bevel, Gauge and FDA Class

2 free questions a day, no account.

An AI assistant for research: funder rules, compliance, methods and publishing. It links the sources behind its answers and labels answers that come from a web search.

Answers draw on CASRAI's guides and dictionary plus the federal and funder documents we index: Federal Register, Grants.gov, Regulations.gov and UKRI.

Works on this site and inside Claude, Cursor and the AI tools you already use.

Everything CASRAI publishes — this page, the dictionary, the guides and the news — stays open to read, with no account and no card.

Referenced across the research world

University of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logoUniversity of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logo
  • University of Cambridge logo
  • Columbia University logo
  • Crossref logo
  • University of Edinburgh logo
  • Harvard University logo
  • University of Oxford logo
  • Princeton University logo
  • Stanford School of Medicine logo
  • University College London logo
  • ORCID logo

View CASRAI adoption →