Written and maintained by CASRAI Editorial Board
Published
On this page
Short answer
An oligo (short for oligonucleotide) is a short, chemically synthesized single- or double-stranded nucleic acid polymer, typically 10 to 100 nucleotides long. Built from DNA or RNA monomers, oligos serve as essential laboratory tools for PCR amplification, hybridization probes, DNA sequencing, CRISPR gene editing, and targeted therapeutic gene regulation.
Definition and scope
In biochemical nomenclature, the prefix oligo- derives from the Greek for “few.” The National Center for Biotechnology Information (NCBI) MeSH taxonomy (descriptor D009841) defines oligonucleotides as short polymers of nucleic acids that function as genetic probes, primers, or therapeutic agents. Unlike genomic DNA spanning millions of base pairs, oligonucleotides occupy a discrete size range: typically 18 to 30 nucleotides for standard enzymatic primers, and up to 80 to 120 nucleotides for CRISPR guide RNAs or synthetic gene blocks.
Structurally, an oligo consists of repeating nucleotide monomers linked by 3′-to-5′ phosphodiester bonds (or synthetic analogues). Each monomer contains three components:
- A nitrogenous base: Purines (adenine [A], guanine [G]) and pyrimidines (cytosine [C], thymine [T] in DNA, or uracil [U] in RNA). Degenerate positions follow IUPAC-IUBMB ambiguity codes (e.g., R for A/G, Y for C/T, N for any base).
- A pentose sugar: 2′-deoxyribose in DNA or ribose in RNA. The 2′-hydroxyl (−OH) group makes RNA vulnerable to hydrolytic cleavage.
- A phosphate group: Linking adjacent sugars. In therapeutic oligos, non-bridging oxygens are often replaced with sulfur to yield phosphorothioate (PS) linkages that resist cellular exonucleases.
How it works or how it is used in practice
Modern oligonucleotides are manufactured by automated solid-phase phosphoramidite chemistry on solid supports, such as controlled pore glass (CPG) or polystyrene beads. Assembly proceeds in the 3′→5′ direction through a recurring four-step cycle:
- Deblocking: The 5′-dimethoxytrityl (5′-DMT) protecting group is removed with acid (trichloroacetic acid), exposing a free 5′-hydroxyl (−OH).
- Coupling: The next phosphoramidite monomer is mixed with an activator (such as 4,5-dicyanoimidazole) and coupled to the 5′-OH group, forming a phosphite triester.
- Capping: Because coupling efficiency averages 98.5% to 99.5%, unreacted chains fail to extend. Acetic anhydride acetylates these 5′-OH groups, preventing deletion sequences (n−1).
- Oxidation: The phosphite triester is converted to a stable phosphate triester using iodine and water in pyridine/THF (or a sulfurizing agent for phosphorothioates).
After synthesis, the oligo is cleaved from the support, and base protecting groups are removed with ammonium hydroxide. As documented in Bio-Rad Bulletin 3290, solid-phase synthesis yields cumulative truncation failure sequences, requiring downstream purification tailored to the application.
Types or related concepts
Oligonucleotides are classified by their biochemical structure, sequence architecture, and functional laboratory application:
| Oligo Class | Typical Length | Structural Architecture | Primary Mechanism & Use | Key Quality Requirement |
|---|---|---|---|---|
| PCR Primers | 18–25 nt | Unmodified ssDNA | Hybridizes to target DNA to provide a free 3′-OH for polymerase extension; designed using tools like Primer3. | Standard desalted; free of 3′ truncation artifacts. |
| qPCR Probes | 20–30 nt | Dual-labeled ssDNA (5′ dye, 3′ quencher) | Hydrolysis (TaqMan) or hybridization-dependent fluorescence for real-time target quantification. | HPLC purified (>90% purity); intact dual labeling. |
| In Situ Probes | 20–50 nt | Fluorophore-conjugated ssDNA/RNA | Transcript visualization and subcellular quantification via RNA FISH cytogenetics. | High signal-to-noise ratio; verified dye density. |
| Antisense Oligos (ASOs) | 15–25 nt | Phosphorothioate ssDNA/RNA with 2′-MOE wings | Binds complementary RNA to induce RNase H degradation or alter pre-mRNA splicing. | Preparative HPLC/AEX chromatography (>95% purity); low endotoxin. |
| siRNAs | 21–23 bp | dsRNA with 2-nt 3′ overhangs | Loaded into RISC to direct sequence-specific catalytic cleavage of target mRNA. | Duplex annealed; RNase-free; verified by native PAGE. |
| CRISPR Guide RNAs | 20 nt spacer + scaffold | Single guide RNA (sgRNA) or crRNA:tracrRNA | Directs Cas endonuclease to target genomic sequences; designed with tools like CRISPOR. | Full-length purity (>85%); correct spacer sequence. |
| Aptamers | 20–80 nt | Structured ssDNA or RNA | Folds into tertiary shapes that bind target proteins or small molecules with antibody-like affinity. | High sequence fidelity; confirmed binding affinity. |
Where it matters for labs, clinics or supply decisions
Assay reproducibility depends on proper handling, resuspension, and storage workflows.
Receiving and Centrifugation
Commercial oligos are shipped lyophilized. Transit vibration dislodges the dry pellet, spreading it across tube walls and caps. Always centrifuge tubes briefly (10,000 × g for 30 seconds) before opening to avoid losing dry material.
Resuspension: IDTE vs. Water
Technical guidelines from Integrated DNA Technologies (IDT) recommend resuspending single-stranded DNA and RNA oligos in 1X TE buffer at pH 7.5 to 8.0 containing 10 mM Tris-HCl and 0.1 mM EDTA (IDTE):
- Tris-HCl (10 mM): Maintains alkaline pH. Unbuffered pure water absorbs atmospheric CO2, forming carbonic acid that drops pH to 5.0–6.0 and promotes depurination.
- EDTA (0.1 mM): Chelates trace divalent metal cations required by nucleases without sequestering the magnesium ions needed by Taq polymerases in PCR. Standard 1.0 mM EDTA TE can inhibit PCR unless diluted substantially.
- Avoid DEPC Water: Never use DEPC-treated water for oligos. Residual DEPC modifies adenosine residues, damaging hybridization properties.
The 100 μM Stock Calculation
Master stocks are routinely prepared at 100 μM (100 pmol/μL). To reconstitute a tube, use the direct calculation:
Buffer Volume (μL) = Total nmol on Tube × 10
For example, if the synthesis specification sheet indicates 27.4 nmol, adding 274 μL of IDTE buffer creates a 100 μM master stock. Diluting this stock 1:10 in sterile nuclease-free water yields a 10 μM working solution for amplification assays, such as an 18S primer control.
Storage, Stability and QC
- −20 °C Freezer: Unmodified DNA oligos dissolved in IDTE buffer remain stable for up to 24 months (2 years). Use non-frost-free freezers to prevent repeated defrost thermal cycles.
- 4 °C Refrigerator: In IDTE, DNA oligos remain stable for over 1 year (>60 weeks), suitable for active working stocks.
- −80 °C for RNA: Due to 2′-hydroxyl susceptibility, RNA oligos should be stored at −80 °C in single-use aliquots.
- Quality Control: Identity and purity are confirmed using mass spectrometry (ESI-MS) and chromatographic separation, such as ion-pairing HPLC.
Common misunderstandings
- Misunderstanding: Pure deionized water is ideal for long-term storage. Unbuffered water dissolves ambient CO2, becoming mildly acidic and triggering depurination. Buffered IDTE (pH 8.0) ensures prolonged molecular stability.
- Misunderstanding: Standard 1.0 mM EDTA TE buffer is always interchangeable with IDTE. Standard TE carries ten times more EDTA, which can chelate Mg2+ cofactors and suppress PCR amplification when added in high volumes.
- Misunderstanding: Desalted oligos contain only full-length sequences. Desalting removes small synthesis chemicals, not truncated shortmers (n−1 failure sequences). Applications requiring strict purity require HPLC or PAGE.
- Misunderstanding: Repeated freeze-thaw cycles have zero impact on DNA oligos. Repeated freeze-thaw cycles generate physical shear stress and ice-crystal concentration gradients that cause progressive degradation. Aliquoting working stocks prevents this damage.
Frequently asked questions
What is the difference between an oligo and a primer?
An oligo is any short synthetic nucleic acid sequence regardless of function. A primer is a specific functional subclass designed to bind a target template and provide a free 3′-hydroxyl group for polymerase extension.
How long is a typical laboratory oligonucleotide?
Standard PCR primers and qPCR probes typically span 18 to 30 nucleotides. Specialized oligonucleotides, including CRISPR guide RNAs and gene blocks, extend from 80 to 120 nucleotides.
How is oligo concentration measured?
Concentration is measured by UV spectrophotometry at 260 nm (A260) using the Beer-Lambert law: C = A260 / (ε × l), with sequence-specific extinction coefficients calculated via nearest-neighbor models.
Why are therapeutic oligos chemically modified?
Unmodified phosphodiester oligos are degraded by nucleases within minutes. Chemical modifications, such as phosphorothioate backbones and 2′-MOE ribose substitutions, increase nuclease resistance and target affinity.
Can oligonucleotides be stored dry at room temperature?
Lyophilized DNA oligos tolerate ambient transit for short periods, but ambient humidity accelerates degradation over time. Long-term storage should be maintained at −20 °C.
Sources
- Integrated DNA Technologies (IDT). “Handling and Storing DNA and RNA Oligonucleotides.” Technical Educational Resource. Accessed November 9, 2026. https://www.idtdna.com/pages/education/decoded/article/handling-and-storing-dna-and-rna-oligonucleotides
- Bio-Rad Laboratories. “Preparative Anion Exchange Chromatography for the Purification of DNA Oligonucleotides.” Technical Application Bulletin 3290. Accessed November 9, 2026. https://www.bio-rad.com/en-us/webroot/web/pdf/lsr/literature/bulletin_3290.pdf
- National Center for Biotechnology Information (NCBI). “Oligonucleotides.” Medical Subject Headings (MeSH) Descriptor D009841. Accessed November 9, 2026. https://meshb.nlm.nih.gov/record/ui?ui=D009841
- Caruthers, M. H. “Gene synthesis machines: DNA chemistry and its uses.” Science, 1985, 230(4723): 281–285. DOI: 10.1126/science.3863253.
- Cornish-Bowden, A. “Nomenclature for incompletely specified bases in nucleic acid sequences: recommendations 1984.” Nucleic Acids Research, 1985, 13(9): 3021–3030. DOI: 10.1093/nar/13.9.3021.







