Skip to main content
v2026.11,986 entries · CC-BY 4.0
LAC HealthSponsored

Shop port cath supplies

  • FDA registered
  • ISO 13485
  • BBB Accredited A+

Shop at LAC Health

What Is a Port-A-Cath? Parts, Types and FDA Class

A Port-A-Cath is an implanted venous port. See how it is built, single vs double lumen, power-injectable ports, and its FDA Class II regulation.

Written and maintained by CASRAI Editorial Board

Published · Last updated

This page describes products and general use; it is not medical advice.

On this page

A Port-A-Cath is a brand-style name for a subcutaneous implanted venous port: a small reservoir with a self-sealing top, placed under the skin and joined to a long-term catheter, so that fluids and medicines can be given and blood sampled repeatedly without a new needle-stick into a vein each time. The same device class is also called an implanted port, a totally implantable venous access device (TIVAD), or just a “port.” Clinic staff, students and buyers meet the term on charts, care-team letters and supplier lists, so this page decodes the name and sets out what the device is, its parts, its variants and its FDA classification.

What a Port-A-Cath is, and why the name is confusing

A Hull University Teaching Hospitals NHS patient leaflet titled “Totally implantable venous access devices (TIVAD) / Port-A-Cath” uses the two names together and calls the Port-A-Cath “the main form of a central venous access device.” Memorial Sloan Kettering (MSK) describes an implanted port as “a type of central venous catheter (CVC)” and says a port may be a Mediport®, BardPort®, PowerPort® or Port-A-Cath®. In other words, the same thing can be listed under a product name, a generic name, or a regulatory name.

The U.S. regulatory name is “subcutaneous, implanted, intravascular infusion port and catheter” (21 CFR 880.5965). The regulation identifies it as a device with an implanted reservoir that connects to a long-term intravascular catheter, allowing “repeated access to the vascular system for the infusion of fluids and medications and the sampling of blood.” FDA classifies it as Class II (special controls), with the guidance document “Guidance on 510(k) Submissions for Implanted Infusion Ports” (October 1990) named as the special control. For the longer plain-language overview, see What Is an Implanted Port?; for how to read FDA classification records, see FDA Product Classification Database.

How it is built

Under the FDA definition, the device has two working parts: a portal body with a resealable septum and an outlet, and a long-term catheter. The portal body can be made of metal, plastic, or a combination of these materials. The catheter is either preattached to the port or attached to it at the time of device placement.

The NHS leaflet describes the catheter as a soft, thin, hollow plastic tube whose tip sits in a vein just above the heart, with the port as a disc in the chest. MSK adds that the septum, the raised center where needles are placed, is made from a self-sealing rubber material and that “nothing can enter the port without a needle in it.” The patient leaflet describes the port as showing as a small bump under the skin once healed.

Types and variants

Variation falls along a few lines. Each row below names its source.

Variant What the source says Source
Single lumen “A single lumen port has 1 access point.” MSK says most people get this type. MSK patient education
Double (multiple) lumen “A double lumen port has 2 access points.” FDA’s definition covers single or multiple lumen designs. MSK; 21 CFR 880.5965
Power-injectable MSK says most implanted ports are made to be used during imaging tests and calls these power-injectable ports. MSK patient education
Catheter attachment Catheter is either preattached to the port or attached at the time of placement. 21 CFR 880.5965
Port body material Metal, plastic, or a combination. 21 CFR 880.5965
Port shape Circle, oval or triangle. MSK patient education

Brand-specific labeling differs by product. One product with its own page is covered in Power Port: BD PowerPort Implanted Port, Limits and MRI Status.

Sizes and specifications that matter

FDA says only that the device “is available in various profiles and sizes.” The one dimension given in the primary sources is the port disc: the NHS leaflet gives approximately 2.5 to 4 cm in diameter. Catheter diameters and lengths vary by product and are not given in those sources, so they are not listed. Needle gauges and lengths are a separate topic: see Port Needle Sizes: Gauge and Length Chart.

Specification Value stated Source
Port disc diameter Approximately 2.5 to 4 cm Hull University Teaching Hospitals NHS leaflet
Profiles and sizes “Various profiles and sizes”; single or multiple lumen 21 CFR 880.5965

What identifies a specific port

Because one device can appear under a trade name, a generic name and a regulatory name, a few identifiers help:

  • The wallet card. MSK says patients are given a wallet card with information about their port.
  • Power-injectable status. Power-injectable marking, as described by MSK.
  • Lumen count. One access point or two (MSK).
  • Regulatory identity. The FDA regulation is 21 CFR 880.5965, Class II. The MRI condition wording on a label is explained in MR Conditional: What the MRI Safety Label Means.

The labeling or instructions for use that come with a specific product are the authority for its conditions; this page does not substitute for them.

Handling and longevity basics

General points from the NHS leaflet and MSK, not individual advice:

  • A port can be left in for a long period. MSK says it can stay in place for years.
  • The NHS leaflet lists bruising, infection, thrombosis (clot) and, rarely, lung puncture as complications. Placement and needle access are clinical procedures done by trained staff and are not described here.
  • Care schedules and any questions about a particular port belong with the person’s own care team.

Common mistakes

  • Treating “Port-A-Cath” as a single specification. It is a name used for a class of implanted ports; lumen count, power-injectable status and materials vary.
  • Treating a port as the same as a PICC line. The NHS leaflet lists a tunnelled line and a PICC as alternative forms of central access. See What Is a PICC Line? for the other device.
  • Relying on a name alone. The labeling or instructions for use that come with a specific product are the authority for that product.

FAQ

What is a Port-A-Cath used for?

FDA’s definition says the device allows repeated access to the vascular system for the infusion of fluids and medications and the sampling of blood. The NHS leaflet also names long-term treatment, parenteral nutrition and intravenous fluids among its contexts.

How is a Port-A-Cath used?

In general terms, the septum is accessed with a needle and the device gives repeated access to the bloodstream through the attached catheter. MSK notes that nothing can enter the port without a needle in it. Use is taught by the care team and no steps are given here.

What are the sizes of a Port-A-Cath?

FDA says “various profiles and sizes”; the NHS leaflet gives the port disc as approximately 2.5 to 4 cm across. Product-specific dimensions are in the manufacturer’s labeling.

Is “Port-A-Cath” the same as an implanted port?

MSK lists Port-A-Cath® among the names a person’s implanted port may carry, alongside Mediport®, BardPort® and PowerPort®. The regulatory name for the class is in 21 CFR 880.5965.

Sources

  • 21 CFR 880.5965, Subcutaneous, implanted, intravascular infusion port and catheter, Cornell Legal Information Institute, law.cornell.edu/cfr/text/21/880.5965, checked 2026-11-03.
  • Hull University Teaching Hospitals NHS Trust, Totally implantable venous access devices (TIVAD) / Port-A-Cath patient leaflet, hey.nhs.uk, checked 2026-11-03.
  • Memorial Sloan Kettering Cancer Center, Your Implanted Port, mskcc.org, checked 2026-11-03.

Follow CASRAI

Research-administration guidance, standards updates and independent tool reviews.

Ask CASRAI · free to try

Ask about What Is a Port-A-Cath? Parts, Types and FDA Class

2 free questions a day, no account.

An AI assistant for research: funder rules, compliance, methods and publishing. It links the sources behind its answers and labels answers that come from a web search.

Answers draw on CASRAI's guides and dictionary plus the federal and funder documents we index: Federal Register, Grants.gov, Regulations.gov and UKRI.

Works on this site and inside Claude, Cursor and the AI tools you already use.

Everything CASRAI publishes — this page, the dictionary, the guides and the news — stays open to read, with no account and no card.

Referenced across the research world

University of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logoUniversity of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logo
  • University of Cambridge logo
  • Columbia University logo
  • Crossref logo
  • University of Edinburgh logo
  • Harvard University logo
  • University of Oxford logo
  • Princeton University logo
  • Stanford School of Medicine logo
  • University College London logo
  • ORCID logo

View CASRAI adoption →