Skip to main content
v2026.11,986 entries · CC-BY 4.0

Wireless Power Transfer: How It Works, Standards and Limits

How wireless power transfer works, the three method families, and the scope limits of SAE J2954, Wireless Power Consortium Qi and ICNIRP guidelines.

Written and maintained by CASRAI Editorial Board

Published

On this page

Wireless power transfer (WPT) is the delivery of electrical power from a source to a load across a gap with no wire or contact between them. In practice it covers three families of methods, namely inductive coupling, magnetic resonant coupling and electromagnetic radiation, and each trades distance against efficiency differently. Which rules apply to a given system depends on the application: electric-vehicle charging, consumer devices and exposure limits are governed by different bodies with different scopes.

Short answer

WPT moves power without a physical connection. A transmitter produces a time-varying field, a receiver captures part of it, and the receiver converts it back to usable electrical power. A 2015 survey by Mou and Sun separates the technologies into inductive coupling-based, magnetic resonant coupling-based and electromagnetic radiation-based WPT, and names improving transmission efficiency and distance as the main research themes. Standards then add rules on top of the physics: SAE J2954 for light-duty electric vehicles, the Wireless Power Consortium’s Qi specification for consumer products, and ICNIRP’s 2020 guidelines for human exposure to radiofrequency electromagnetic fields from 100 kHz to 300 GHz.

Definition and scope

In WPT, energy crosses the gap through a field rather than a conductor. The three categories in the Mou and Sun survey (IEEE VTC2015-Spring, also on arXiv as 1502.04727) are a convenient way to scope the topic:

  • Inductive coupling-based WPT: power moves between nearby coils through a shared magnetic field.
  • Magnetic resonant coupling-based WPT: the coupled coils are tuned to resonance, which the survey presents as the approach that reaches longer distances than plain inductive coupling.
  • Electromagnetic radiation-based WPT: power is carried by radiated electromagnetic waves rather than by a near magnetic field.

A 2020 systematic review of WPT for implantable medical devices in Sensors (20(12):3487, DOI 10.3390/s20123487) widens the list for the implant setting to capacitive coupling, inductive coupling, magnetic resonance coupling and, more recently, acoustic and optical powering. That review names the key design parameters as the size of the WPT system, the separation distance between the outside environment and the implanted device, the operating frequency and tissue safety from power dissipation. The same four questions (size, distance, frequency, safety) apply to nearly every WPT design problem, inside the body or outside it.

What WPT is not: it is not a single standard or a single technology. A phone charging pad, a vehicle charging pad and a laboratory resonant-coupling experiment all fall under the heading, yet they are specified, certified and assessed by different documents.

How it works in practice

The generic chain has four stages: a power source drives the transmitter, the transmitter couples to the receiver through the gap, the receiver converts the captured field to electrical power, and a control layer manages alignment, power level and safety. The three method families differ mainly in how the coupling stage works.

Inductive coupling and consumer charging: Qi

The most familiar everyday form is the Qi standard of the Wireless Power Consortium (WPC). According to the WPC’s Qi page, Qi launched in 2010 and the consortium cites more than 13,000 Qi Certified products. Qi2 adds a magnetic attachment that aligns the device and the charger for efficiency, and WPC describes Qi2 as delivering 15 W. Qi version 2.0 launched in 2023, and Qi version 2.2.1, branded Qi2 25W, launched in July 2025. WPC states that Qi2 25W takes a device from 0 to 50% in about 30 minutes; this is WPC’s own claim about its specification, not an independent measurement.

The page makes one point that matters to anyone buying or specifying equipment: only Qi Certified products may display the Qi or Qi2 logo, and certified products are tested at independent laboratories for safety and interoperability. WPC maintains a certified products database. A logo on a box is therefore a certification statement, while a claimed wattage in a product listing is a separate claim.

Magnetic resonance: the 2007 demonstration

The best-known laboratory result in resonant WPT is Kurs et al., published in Science 317(5834):83-86 in 2007 (DOI 10.1126/science.1143254). Using self-resonant coils in a strongly coupled regime, the authors demonstrated nonradiative power transfer over distances up to 8 times the radius of the coils. They transferred 60 watts with approximately 40% efficiency over distances in excess of 2 meters, and their quantitative model matched the experimental results to within 5%.

Treat this as a dated, controlled laboratory demonstration of what strongly coupled resonators can do, not as a specification that a commercial product meets. It shows that distance can be extended well beyond contact charging, and it also shows the price: roughly 40% efficiency at that range.

Electric vehicles: SAE J2954

For light-duty plug-in electric vehicles, the industry-wide specification is SAE J2954. The edition read for this page, J2954_202208 (issued 2022-08-26; the original issue dates from May 2016), establishes minimum performance and safety criteria and covers interoperability, electromagnetic compatibility, electromagnetic field exposure, performance, safety and testing. Its stated scope is narrow and worth quoting precisely: unidirectional charging from the grid to the vehicle, stationary charging only, and above-ground (surface-mounted) installations only, for home and public charging. Charge levels are based on SAE J1772 AC Levels 1, 2 and 3 with some variations. SAE’s page also lists a later revision, J2954_202408 (2024-08-13), so check which revision a project or procurement document cites.

Radiated power

The radiation-based family is the third category in the Mou and Sun survey, which treats improving transmission efficiency and distance as the research themes shared by all three families. Human exposure to radiofrequency fields is addressed by a separate document, the ICNIRP 2020 guidelines described below.

The comparison below compiles what each named source says it covers, and where each draws its own boundary. The data table that follows this section lists the sources side by side, with the stated scope, the stated limit and the date for each.

  • Method families (Mou and Sun, 2015): inductive, magnetic resonant, electromagnetic radiation.
  • Implant-oriented method list (Sensors, 2020): capacitive, inductive, magnetic resonance, acoustic and optical.
  • Vehicle standard (SAE J2954): stationary, unidirectional, surface-mounted.
  • Consumer certification (WPC Qi): certification and logo rules, independent-lab testing for safety and interoperability.
  • Exposure guidelines (ICNIRP 2020): human exposure to radiofrequency electromagnetic fields, 100 kHz to 300 GHz.

The sources do not all measure the same thing. SAE J2954 is a performance and interoperability specification, WPC Qi is a certification program tied to one product family, and ICNIRP is a human-exposure guideline that does not specify how any charger is built. Reading them together shows where one document stops and another starts.

Where it matters for labs and equipment decisions

Four points follow from the sources, each limited to what they state.

  1. Frequency range determines which exposure guideline applies. ICNIRP’s 2020 radiofrequency guidelines cover 100 kHz to 300 GHz and replace the 100 kHz to 300 GHz part of ICNIRP 1998 and the 100 kHz to 10 MHz part of the ICNIRP 2010 low-frequency guidelines. A system operating inside that range falls in scope of the 2020 document. A system’s own operating frequency is the first fact to establish.
  2. Read a standard’s scope before citing it. A procurement or lab document that says a vehicle charger is “SAE J2954 compliant” is making a claim about a specification limited to stationary, unidirectional, surface-mounted charging of light-duty vehicles. It does not describe in-motion charging or vehicle-to-grid power flow.
  3. Separate certification claims from performance claims. The Qi logo means the product was certified; the headline wattage and charging-time figures are WPC’s specification-level statements. For measurement work in a lab, define the test conditions (distance, alignment, load) before comparing any two efficiency numbers, because the 2007 resonant result shows that efficiency depends heavily on distance.
  4. Implants are a design problem of their own. The Sensors review lists tissue safety from power dissipation as a key parameter alongside size, distance and frequency, and it benchmarks the techniques against each other on implanted receiver size, WPT distance, power transfer efficiency and tissue safety. Anyone working with powered implants should work from the device’s own documentation and regulatory submissions rather than from general WPT descriptions.

For adjacent topics on this site, UL 1973 on stationary battery safety covers a standard that comes up when vehicle or stationary storage is part of a charging system, centrifuge electrical specifications and safety shows how an equipment-electrical guide is structured around ratings and safeguards, and IEC 62304 versus ISO 13485 addresses the software and quality-system standards that apply when a powered device is a medical device.

Common misunderstandings

“Wireless” means no limits on distance

The 2007 result is notable because it reached more than 2 meters at about 40% efficiency, and the same paper’s abstract describes distances as multiples of the coil radius (up to 8 times). Everyday inductive pads work over a much shorter gap, and WPC’s Qi2 magnetic attachment exists specifically to align the device and charger because alignment affects efficiency.

One standard covers all wireless charging

There is no single document. SAE J2954 is for light-duty plug-in electric vehicles; Qi is the WPC’s specification for its certified products; ICNIRP’s guidelines address exposure, not product design. Citing the wrong one for a given system is a common error.

A Qi logo proves the quoted charging speed

According to WPC, the logo is for Qi Certified products tested for safety and interoperability. The 0 to 50% in about 30 minutes figure for Qi2 25W is WPC’s stated claim for the specification. Neither statement is an independent measurement of a particular product.

Newer revisions replace older ones automatically

SAE’s page for the 2022 edition of J2954 lists a 2024 revision. A contract, protocol or lab SOP that cites “J2954” without a revision is ambiguous.

Efficiency figures are portable between experiments

A reported efficiency is tied to the distance, alignment, coil geometry and load of the experiment. The 40% in the 2007 study applies to its specific coil arrangement at distances in excess of 2 meters.

Frequently asked questions

What is wireless power transfer?

It is the transfer of electrical power across a gap without a wire or contact. Mou and Sun’s 2015 survey groups it into inductive coupling, magnetic resonant coupling and electromagnetic radiation methods.

What are the main types of wireless power transfer?

The three categories in the Mou and Sun survey are inductive coupling-based, magnetic resonant coupling-based and electromagnetic radiation-based WPT. A 2020 review of implantable devices in Sensors also lists capacitive coupling and acoustic and optical powering.

Which standard governs wireless charging of electric vehicles?

SAE J2954 is the industry-wide specification for wireless power transfer for light-duty plug-in electric vehicles. The 2022 edition covers unidirectional, stationary, above-ground charging; SAE’s page also lists a 2024 revision.

What does the Qi logo mean?

Per the Wireless Power Consortium, only Qi Certified products display the Qi or Qi2 logo, and they are tested at independent laboratories for safety and interoperability.

How far can wireless power be sent, and at what efficiency?

One widely cited laboratory result, Kurs et al. (Science, 2007), transferred 60 watts at approximately 40% efficiency over distances in excess of 2 meters with self-resonant coils. That is a single experiment, not a general limit.

Which exposure guidelines apply to radiofrequency fields from wireless power systems?

ICNIRP’s 2020 radiofrequency guidelines apply to exposure to electromagnetic fields from 100 kHz to 300 GHz. Whether a particular system is covered depends first on its operating frequency.

Sources

  • SAE International, J2954_202208, Wireless Power Transfer for Light-Duty Plug-In/Electric Vehicles and Alignment Methodology: saemobilus.sae.org (checked 2026-11-14).
  • Wireless Power Consortium, Qi: wirelesspowerconsortium.com/qi (checked 2026-11-14).
  • ICNIRP, Guidelines for Limiting Exposure to Electromagnetic Fields (100 kHz to 300 GHz), 2020: icnirp.org (checked 2026-11-14).
  • Kurs A, et al. Wireless power transfer via strongly coupled magnetic resonances. Science 317(5834):83-86, 2007. DOI 10.1126/science.1143254; PubMed 17556549 (checked 2026-11-14).
  • Mou X, Sun H. Wireless Power Transfer: Survey and Roadmap. IEEE VTC2015-Spring, 2015; arXiv:1502.04727 (checked 2026-11-14).
  • Wireless Power Transfer Techniques for Implantable Medical Devices: A Review. Sensors 20(12):3487, 2020. DOI 10.3390/s20123487; PubMed 32575663 (checked 2026-11-14).

Data: Wireless power transfer: what each named source covers and where it stops

Original compilation of six named sources on wireless power transfer (SAE J2954, Wireless Power Consortium Qi, ICNIRP 2020 RF guidelines, Kurs et al. 2007, Mou and Sun 2015, and a 2020 Sensors review) showing each one's type, stated coverage, stated scope limit and date, compiled from each source's own page or abstract.

Period covered: 2007-2025.

Wireless power transfer: what each named source covers and where it stops
SourceTypeWhat it coversStated scope or limitDate
SAE J2954_202208Vehicle standardInteroperability, EMC, EMF, performance, safety and testing for WPT of light-duty plug-in electric vehiclesUnidirectional (grid to vehicle), stationary, above-ground (surface-mounted) only2022-08-26 (original issue May 2016; later revision J2954_202408 dated 2024-08-13 listed)
Wireless Power Consortium QiConsumer certificationQi / Qi2 specification and certification; independent-lab testing for safety and interoperabilityOnly Qi Certified products display the Qi or Qi2 logo; Qi2 is 15 W, Qi2 25W (v2.2.1) is a WPC-stated 0 to 50% in about 30 minQi launched 2010; v2.0 2023; v2.2.1 July 2025
ICNIRP RF guidelines 2020Exposure guidelineHuman exposure to radiofrequency electromagnetic fields100 kHz to 300 GHz; replaces part of ICNIRP 1998 and ICNIRP 2010 (100 kHz to 10 MHz)2020
Kurs et al., Science 317(5834)Laboratory demonstrationNonradiative power transfer with two self-resonant copper coils60 W at about 40% efficiency over more than 2 m; distances up to 8 times the coil radius; model within 5%2007
Mou and Sun, VTC2015-SpringSurveyThree WPT technologies: inductive, magnetic resonant, electromagnetic radiationNames transmission efficiency and distance as the main research themes2015
Sensors 20(12):3487 reviewImplant-focused reviewCapacitive, inductive, magnetic resonance, acoustic and optical powering for implantable medical devicesKey parameters: system size, separation distance, operating frequency, tissue safety2020

Sources

Compiled by CASRAI from the sources above. Free to reuse under CC BY 4.0 with attribution.

Follow CASRAI

Research-administration guidance, standards updates and independent tool reviews.

Ask CASRAI · free to try

Ask about Wireless Power Transfer: How It Works, Standards and Limits

2 free questions a day, no account.

An AI assistant for research: funder rules, compliance, methods and publishing. It links the sources behind its answers and labels answers that come from a web search.

Answers draw on CASRAI's guides and dictionary plus the federal and funder documents we index: Federal Register, Grants.gov, Regulations.gov and UKRI.

Works on this site and inside Claude, Cursor and the AI tools you already use.

Everything CASRAI publishes — this page, the dictionary, the guides and the news — stays open to read, with no account and no card.

Referenced across the research world

University of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logoUniversity of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logo
  • University of Cambridge logo
  • Columbia University logo
  • Crossref logo
  • University of Edinburgh logo
  • Harvard University logo
  • University of Oxford logo
  • Princeton University logo
  • Stanford School of Medicine logo
  • University College London logo
  • ORCID logo

View CASRAI adoption →