
On November 20, 2026, UK Research and Innovation and the Science and Technology Facilities Council announced that researchers from Queen Mary University of London and University College London used STFC’s open-source interactive Digital Volume Correlation software alongside synchrotron tomography at Diamond Light Source and the ESRF to map how spinal disc collagen fibres deform under mechanical pressure, establishing a new computational benchmark for multi-scale biomechanics research.
Multimodal Synchrotron Imaging and Volume Correlation
Understanding how biological tissues withstand daily physical loads has long challenged biomedical engineers. Intervertebral discs serve as the spine’s primary shock absorbers, distributing mechanical forces across 23 spinal joints during routine actions like walking, bending, and carrying weight. Although conventional clinical imaging like magnetic resonance imaging identifies advanced disc damage, it lacks the spatial resolution to track how microscopic collagen fibrils deform and interact within intact tissue under load.
To overcome this barrier, an international research team led by Queen Mary University of London (QMUL) and University College London (UCL), in collaboration with Diamond Light Source and the European Synchrotron Radiation Facility (ESRF), developed a multimodal imaging framework called TomoSAXS. Published in Nature, the methodology pairs synchrotron phase-contrast computed tomography with small-angle X-ray scattering (SAXS). Phase-contrast tomography visualizes the spatial arrangement and movement of larger collagen fibres, while SAXS captures sub-nanometre axial displacements (D-period spacing) within the smaller collagen fibrils nested inside them.
To turn these complex three-dimensional scans into quantifiable deformation data, the researchers used interactive Digital Volume Correlation (iDVC), an open-source software suite developed by STFC Scientific Computing. Rather than calculating broad averages across the entire tissue, iDVC compares volumetric scans taken before and during mechanical compression. By tracking displacement across thousands of distinct spatial points, the software enables researchers to follow the precise deformation trajectories of individual collagen fibres.
Technical Architecture and Multiscale Imaging Parameters
The experimental framework bridged eight orders of magnitude in structural and strain resolution. Initial loading experiments were conducted on small-animal models at Diamond Light Source in Oxfordshire, establishing baseline correlation parameters for volumetric tracking. The team then scaled the protocol at the ESRF in Grenoble, imaging intact human intervertebral discs measuring over 5 centimetres in diameter—an order of magnitude larger than any biological specimen previously analyzed using three-dimensional X-ray scattering.
By combining high-energy coherent X-ray phase-contrast tomography on ESRF beamline BM18 with SAXS on beamline ID31, the researchers aligned nanoscale molecular strain with microscale fibre orientations throughout the concentric lamellae of the annulus fibrosus.
| Component | Facility / Platform | Modality | Resolution / Scale | Function |
|---|---|---|---|---|
| Macro-architecture | ESRF Beamline BM18 | Phase-contrast micro-CT | Micron-scale (5 cm human disc) | 3D tracking of structural collagen bundles |
| Fibrillar Strain | Diamond I22 / ESRF ID31 | Small-angle X-ray scattering | Sub-nanometre D-period stagger | Measurement of molecular tension |
| iDVC Software | STFC Scientific Computing | Interactive Volume Correlation | Volumetric mesh of thousands of points | Deformation tensor mapping under load |
| Infrastructure | CCPi / CoSeC / ALC | Open computational codebases | Multi-institutional tools | Cross-facility reproducible data pipeline |
The analysis revealed that intrafibrillar molecular pre-strain follows a distinct lamellar texture tightly linked to microscale fibre strain. Under compression, molecular pre-strain is inversely related to fibril strain, demonstrating that molecular unwinding functions as a natural mechanical cushion. Furthermore, iDVC pinpointed zones of high curvature and concentrated radial strain at the boundary between the inner nucleus pulposus and the outer annulus fibrosus, clarifying why structural tears and herniations frequently begin at this anatomical interface.
Long-Term Scientific Computing Investments and Open-Source Infrastructure
The breakthrough was made possible through multi-year public investments in scientific software. STFC Scientific Computing developed the iDVC code through the Collaborative Computational Project in Tomographic Imaging (CCPi). The project received continuous backing from the Computational Science Centre for Research Communities (CoSeC) and the Ada Lovelace Centre (ALC), collaborating closely with Professor Brian K. Bay of Oregon State University, a pioneer in digital volume correlation.
UKRI and STFC funding models emphasize sustainable software engineering rather than short-lived academic code. By supporting professional computational scientists within national laboratories, CoSeC and CCPi deliver robust, documented tools tailored for high-performance computing clusters and synchrotron beamlines. This support model ensures experimental teams can maintain rigorous computational reproducibility across complex physical science workflows.
Distributing iDVC under open-access licences directly advances international FAIR data principles for research code. Open availability allows biomechanics laboratories worldwide to audit deformation algorithms, benchmark processing pipelines against reference datasets, and adapt correlation routines for other fibrous biomaterials.
Perspectives From Research Teams and Computational Leads
Researchers and software architects emphasized how dedicated scientific computing infrastructure unlocked the full value of physical synchrotron beamlines. Dr. Danica Sugic, computational scientist in the Computed Tomography and Imaging group at STFC Scientific Computing, highlighted the software’s analytical contribution:
“Tissue and fibre deformations under compression are extremely intricate and difficult to track manually. The iDVC software uniquely provides very precise measurements and 3D rendering of how thousands of distinct points move within the disc.”
Dr. Edoardo Pasca, Head of the Computed Tomography and Imaging group at STFC Scientific Computing, noted the importance of long-term funding programs:
“This work demonstrates the importance of long-term funding for software development, such as this enabled by CoSeC and ALC. Our computational capability in this project was a key element in revealing how the spine’s shock-absorbing discs behave. In the long term it will help to achieve the goal of improving lives, which is one of the UK’s research and innovation priorities.”
Professor Himadri S. Gupta, joint senior author from Queen Mary University of London, pointed to the evolutionary biomechanics revealed by the data:
“The findings point to a potential trade-off in the way the disc is built. We found that substantial pre-stress within collagen fibrils may help the disc achieve the stiffness it needs to perform its role but could also leave some structures with less capacity to withstand additional damaging loads.”
Joint senior author Professor Peter D. Lee of University College London noted that coordinating phase-contrast tomography and SAXS across intact human samples over 5 cm in diameter provides an unprecedented observational bridge connecting molecular mechanics with organ-level behavior.
Implications for Research Facilities, Software Teams, and Biomechanics Labs
The success of the TomoSAXS and iDVC pipeline provides practical lessons for university research offices, beamline user facilities, and biomechanics laboratories. Foremost, it demonstrates that advanced synchrotron imaging instruments require concurrent investment in specialized data pipelines. Facility managers must allocate resources for scientific software developers and automated processing pipelines alongside physical beamline maintenance.
For university research offices managing multi-partner grants, the findings highlight the value of robust institutional data availability statements and data curation plans. Managing multiscale 3D datasets from in situ compression experiments demands standardized storage formats and coordinated access protocols across international facilities.
Additionally, the research illustrates how cross-disciplinary tool adoption accelerates biomedical discovery. Digital volume correlation originated in materials engineering to analyze metals and composites; adapting it for soft tissues required tailored numerical methods. Laboratories adopting these tools should establish formal code review practices for research software and draw on established open-source particle tracking tools like trackpy and iDVC to maintain experimental rigor.
Future Trajectories for Biomaterials and Clinical Translation
Although TomoSAXS and iDVC do not represent a clinical treatment themselves, they establish an empirical platform for future translational studies. According to the World Health Organization, lower back pain is the single leading cause of disability globally. Disc degeneration is a major contributor to this burden, yet the micromechanics of disc failure have remained poorly understood.
In upcoming research stages, the consortium plans to use TomoSAXS to assess structural degradation in diseased human spinal discs. Mapping how collagen breakdown disrupts load distribution will help biomedical engineers evaluate tissue-engineered repair hydrogels and biomimetic replacement scaffolds under realistic mechanical stress.
Because the TomoSAXS and iDVC pipeline is material-independent, researchers also anticipate applying the methodology to other load-bearing tissues—such as articular knee cartilage and heart valves—as well as bio-inspired synthetic composites for aerospace and soft robotics.
Sources
- UK Research and Innovation: STFC software reveals how spinal discs respond to pressure, checked 2026-11-20
- STFC Scientific Computing: Spinal health gets a boost from scientific software, checked 2026-11-20
- Nature: Multimodal X-ray imaging reveals hierarchical fibre mechanics, checked 2026-11-20
- Queen Mary University of London: Scientists uncover how the spine’s smallest structures help discs withstand everyday loads, checked 2026-11-20
- Mirage News: Spinal Disc Research Could Lead to New Back Pain Treatments, checked 2026-11-20







