Centrifuge Rotors

Ohaus part 83041512: a four-place swing-out (swinging bucket) rotor taking 1000 mL vessels, in the ID sealable configuration, from the Ohaus Frontier 5000 rotor series. Swing-out geometry pellets flat against the tube bottom rather than the wall. Maximum speed and RCF depend on the rotor and centrifuge pairing and are not quoted here.

Ohaus part 83041499: an 18-position fixed-angle rotor for 1.5 mL and 2.0 mL microcentrifuge tubes, from the Ohaus Frontier 5000 rotor series. Unlike the 24-position biosealed variant in the same series, this is the plain fixed-angle rotor. Maximum speed and RCF depend on the rotor and centrifuge pairing and are not quoted here.

Ohaus part 83041238: a 24-position fixed-angle rotor for 1.5 mL and 2.0 mL microcentrifuge tubes, in the ID BIOSEALS V1 configuration, from the Ohaus Frontier 5000 rotor series. Maximum speed and RCF depend on the rotor and centrifuge pairing and are not quoted here — confirm the rating for your Frontier 5000 model against Ohaus documentation before ordering.

Ohaus 83041050 is a fixed-angle centrifuge rotor with 24 positions for 2.0 mL spin columns, carrying the V1 designation within the Frontier 5000 rotor series. Spin-column rotors are cut for a column seated in a collection tube, which is a taller assembly than a plain 2.0 mL microtube. Maximum speed and RCF are not stated in the documentation held for this listing.

Ohaus 83041014 is a fixed-angle centrifuge rotor for four 8-place PCR strips, giving 32 tube positions, and carries the V1 designation within the Frontier 5000 rotor series. It is the V1 counterpart to 30314841 in the same format, so order by full part number. Maximum speed and RCF are not stated in the documentation held for this listing.

Ohaus 83041011 is a sealable swing-out centrifuge rotor with four 200 mL buckets, carrying the Ohaus ID designation within the Frontier 5000 rotor series. At 800 mL per run it sits between the tube-scale 31013397 and the 4 x 750 mL 30553085 in this catalogue. Maximum speed and RCF are not stated in the documentation held for this listing.

Ohaus 83041010 is a sealable fixed-angle centrifuge rotor with 12 positions for 5 mL FA tubes, carrying the Ohaus ID designation within the Frontier 5000 rotor series. The 5 mL format sits between the microtube and 10 to 15 mL rotors, and this is the only 5 mL rotor in this catalogue. Maximum speed and RCF are not stated in the documentation held for this listing.

Ohaus 83041009 is a fixed-angle centrifuge rotor with four positions listed for either 50 mL RB/FA or 15 mL RB/FA tubes, within the Frontier 5000 rotor series. It is the only dual-format rotor in this catalogue, covering both common conical tube sizes from one part number. Maximum speed and RCF are not stated in the documentation held for this listing.

Ohaus 83041007 is a hematocrit rotor with 24 capillary positions, carrying the V2 designation within the Frontier 5000 rotor series. It is one of two parts in this catalogue with that description; 30472304 is the other, so order by full part number. Maximum speed, RCF and spin time are not stated in the documentation held for this listing.

Ohaus 83041006 is a sealable fixed-angle centrifuge rotor with 18 positions for 1.5 mL and 2.0 mL microtubes, listed within the Frontier 5000 rotor series. It is the smaller of the two sealable microtube rotors here, against 30 places on 30314836. Maximum speed and RCF are not stated in the documentation held for this listing.

Ohaus 31013397 is a swing-out centrifuge rotor with four 10 mL positions, listed within the Frontier 5000 rotor series. It is the smallest swing-out rotor in this catalogue and the only one at tube scale, giving a flat pellet base for small-volume separations. Maximum speed and RCF are not stated in the documentation held for this listing.

Ohaus 30642371 is a fixed-angle centrifuge rotor with 24 positions for 1.5 mL and 2.0 mL microtubes, carrying the BIOSEALS and V2 designations within the Frontier 5000 rotor series. It shares its description with part 30472302 in this catalogue, so order by full part number rather than by configuration. Maximum speed and RCF are not stated in the documentation held for this listing.

Ohaus 30553086 is a fixed-angle centrifuge rotor with four 500 mL positions, carrying the Ohaus ID designation within the Frontier 5000 rotor series. At 2 L per run it is the largest fixed-angle rotor in this catalogue, for bulk pelleting where a wall-formed pellet is acceptable. Maximum speed and RCF are not stated in the documentation held for this listing.

Ohaus 30553085 is a sealable swing-out centrifuge rotor with four 750 mL buckets, carrying the Ohaus ID designation within the Frontier 5000 rotor series. At 3 L total it is the largest-volume rotor in this catalogue, for bulk pelleting and cell harvesting rather than tube-scale work. Maximum speed and RCF are not stated in the documentation held for this listing.

Ohaus 30472305 is a fixed-angle centrifuge rotor with 8 positions for 15 mL tubes, listed within the Frontier 5000 rotor series. It is the smallest and lowest-cost 15 mL rotor in this catalogue, against 12 places on 30314834 and 30 on 30314832. Maximum speed and RCF are not stated in the documentation held for this listing.

Ohaus 30472304 is a hematocrit rotor with 24 capillary positions, carrying the V2 designation within the Frontier 5000 rotor series. Hematocrit rotors spin sealed microhaematocrit capillaries so packed cell volume can be read off against a scale, a dedicated format rather than a tube rotor with adapters. Maximum speed, RCF and run time are not stated in the documentation held for this listing.

Ohaus 30472302 is a fixed-angle centrifuge rotor with 24 positions for 1.5 mL and 2.0 mL microtubes, carrying the BIOSEALS and V2 designations within the Frontier 5000 rotor series. Twenty-four places is the mid-range microtube capacity in this catalogue, between 18 on 83041006 and 30 on 30314836. Maximum speed and RCF are not stated in the documentation held for this listing.

Ohaus 30372718 is a fixed-angle centrifuge rotor with 44 positions for 1.5 mL and 2.0 mL microtubes, carrying both the ID and V2 designations within the Frontier 5000 rotor series. It shares its 44-place microtube format with 30372717, which is listed without the ID designation. Maximum speed and RCF are not stated in the documentation held for this listing.

Ohaus 30372717 is a fixed-angle centrifuge rotor with 44 positions for 1.5 mL and 2.0 mL microtubes, carrying the V2 designation within the Frontier 5000 rotor series. At 44 places it is the highest-capacity microtube rotor in this catalogue. It is the non-ID part of a pair with 30372718; maximum speed and RCF are not stated in the documentation held for this listing.

Ohaus 30314841 is a fixed-angle centrifuge rotor for four 8-place PCR strips, giving 32 tube positions, and carries the Ohaus ID designation within the Frontier 5000 rotor series. It is one of two PCR strip rotors in this catalogue; 83041014 is the V1 part in the same format. Maximum speed and RCF are not stated in the documentation held for this listing.

Ohaus 30314839 is a fixed-angle centrifuge rotor with 12 positions for 1.5 mL and 2.0 mL microtubes, carrying the Ohaus ID designation within the Frontier 5000 rotor series. It is the smallest microtube rotor in this catalogue, suited to low-batch benchwork rather than plate-scale throughput. Maximum speed and RCF are not stated in the documentation held for this listing.

Ohaus 30314836 is a sealable fixed-angle centrifuge rotor with 30 positions for 1.5 mL and 2.0 mL microtubes, carrying the Ohaus ID designation within the Frontier 5000 rotor series. It is the largest sealable microtube rotor in this catalogue, ahead of 83041006 at 18 places. Maximum speed and RCF are not stated in the documentation held for this listing.

Ohaus 30314834 is a fixed-angle centrifuge rotor with 12 positions for 15 mL RB/FA tubes, carrying the Ohaus ID designation and catalogued within the Frontier 5000 rotor series. It is the mid-capacity 15 mL option here, between 30472305 (8 places) and 30314832 (30 places). Maximum speed and RCF are not stated in the documentation held for this listing.

Ohaus 30314833 is a fixed-angle centrifuge rotor with 20 positions for 10 mL RB tubes, carrying the Ohaus ID Hi designation and catalogued within the Frontier 5000 rotor series. It is the only 10 mL round-bottom rotor in this catalogue, sitting between the 15 mL and microtube formats. Maximum speed and RCF are not stated in the documentation held for this listing.