Extraction Systems

A rack-mounted 5 lb closed-loop hydrocarbon extraction system with a 6″ x 48″ sight-glass material column. Each charge takes 5 lb of trim or 10 lb of milled material. A 6″ x 12″ CRC with a 5 micron sintered disc and built-in bypass feeds a jacketed 8″ x 48″ collection vessel of 37.42 L, assembled from 8″ x 36″ and 8″ x 12″ spools so it can be heated and stripped for cleaning. A 200 lb ASME solvent tank holds 96 lb of butane, with a 3″ x 12″ sieve and 10″ x 10″ coil on the recovery side and 100 psi cryogenic relief valves.

A rack-mounted 3 lb closed-loop hydrocarbon extraction system with a 6″ x 24″ sight-glass material column. Each charge takes 3 lb of trim or 5 lb of milled material. A 4″ x 12″ CRC with a 5 micron sintered disc and built-in bypass feeds a 6″ x 36″ collection vessel of 15.5 L, with a 3″ x 12″ sieve and 10″ x 10″ condensing coil on the recovery side and a 50 lb ASME solvent tank holding 24 lb of butane. 1/2″ compression fittings, 1/4″ MJIC nitrogen connections per vessel and 100 psi cryogenic relief valves. Footprint 74″ x 24″ x 66″, 250 lbs.

A jacketed diamond miner vessel for controlled crystallization, listed in 6-inch and 12-inch sizes. The jacket lets a recirculating heater or chiller hold the vessel at a set temperature through nucleation and crystal growth rather than leaving the run to follow ambient conditions. Pressure rating, wetted materials and packing list are not documented in the source data for this listing and are not stated here – confirm them against the manufacturer’s documentation before specifying.

A pressure-rated 304 stainless steel vessel for controlled crystallization of live resin, replacing glass jars with a 100 psi MAWP assembly. Both models ship with an ASME 100 psi relief valve, a glycerin-filled -30 to 150 psi compound gauge and a welded 8″ x 2″ splatter platter for harvesting. The Standard (DM8) holds 1500-1750 mL optimally, 2000 mL maximum, with dual 1.5″ sight glasses; the Large (DM8-L) holds 3000-3700 mL optimally, 4900 mL maximum, and adds a 2″ sight-glass spool section. Rated -30°F to 250°F.

A rack-mounted 5 lb closed-loop hydrocarbon extraction system built around a single 6″ x 48″ sight-glass material column. Each charge takes 5 lb of trim or 10 lb of milled material. A 6″ x 12″ CRC with a 5 micron sintered disc and built-in bypass feeds a jacketed 100 lb, 50 L collection vessel, with a 3″ x 18″ sieve and 10″ x 10″ coil on the recovery side. 304 stainless construction with Superlok compression fittings, 1/4″ MJIC nitrogen connections per vessel and 100 psi cryogenic relief valves. System footprint 78″ x 24″ x 66″, 350 lbs.

A rack-mounted 10 lb closed-loop hydrocarbon extraction system with two 6″ x 48″ sight-glass material columns. Each charge takes 10 lb of trim or 20 lb of milled material. A 6″ x 12″ CRC with a 5 micron sintered disc and a built-in bypass sits ahead of a jacketed 200 lb, 100 L collection vessel, with a 3″ x 18″ sieve and 10″ x 10″ condensing coil on the recovery side. Built in 304 stainless with Superlok compression fittings, 1/4″ MJIC nitrogen connections on every vessel and 100 psi cryogenic relief valves. Footprint 115″ x 24″ x 66″, 550 lbs.

The largest booth in this range: 16 ft wide by 14 ft high, in 30 and 40 ft lengths (Z30, Z40). The 14 ft internal height is the constraint to check first – it needs a tall bay rather than a standard warehouse ceiling. Modular construction, so the enclosure can be expanded later rather than replaced.

The smallest walk-in booth in this range: 10 ft wide by 9 ft high, with 3, 6 or 8 ft of depth (M3, M6, M8). Designed for small to medium extraction production in C1D1 or C1D2 classified indoor environments, including ethanol work, post-extraction processing and other solvent operations.

C1D1 indoor extraction booth in five footprints, from 10 x 10 x 10 ft up to 10 ft wide x 10 ft high x 30 ft long, including two 12 ft wide builds (EM12 at 10 ft long, EM1220 at 20 ft long). Supplied with gas detection and the series’ safety and filtration systems, and configurable to the process layout.

C1D1 indoor extraction booth for medium to large installations, in two builds: DM12 at 12 ft wide x 10 ft high x 15 ft long, and DM30 at 10 ft wide x 12 ft high x 30 ft long. Modular construction means the booth can be disassembled and reassembled if the facility moves, and an optional permit package is offered on this series.

Large-format C1D1 indoor extraction booth at 20 ft wide by 10 ft high, in 20, 30 and 40 ft lengths (EXX20, EXX30, EXX40). Large front doors allow full-size extraction equipment to be moved in and out after installation, and the booth can be configured as a dual-zone environment. Construction is modular, so the enclosure can be expanded rather than replaced.

Entry-level C1D1 indoor extraction booth in four footprints: DYS8 at 8 ft wide x 9 ft high x 8 ft long, and DYS10, DYS20 and DYS30 at 10 ft wide x 9 ft high with 10, 20 and 30 ft lengths. Supplied with gas detection, the series’ safety systems and high-efficiency filtration.

Containerised C1D1 extraction booth for outdoor siting, in 10, 20, 30 and 40 ft lengths at 8 ft wide – 8 ft interior height on the 10 to 30 ft units and 8 ft 6 in. on the 40 ft. Each length is offered uninsulated or insulated, with a combination build on the 40 ft (CS40IC). Containers can be stacked or set side by side for multi-zone configurations.

Peer-reviewed 5 lb closed-loop butane system: one 6″ × 48″ material column, a 6″ × 12″ CRC and a jacketed 100 lb / 50 L collection tank on an aluminium rack.

A passive 2 lb (900 g) top-fill closed-loop extraction column in polished 304 stainless steel, rated 150 psi with Buna-N gaskets. The 8″ hemispherical lid carries 2x 1.5″ and 1x 2″ tri-clamp ports plus 2x 1/4″ and 2x 1/2″ FNPT connections, and the column runs through a 4″ filter plate with 100 micron mesh into a 4″ x 24″ spool. Three configurations are listed: Base is the extractor alone, Starter adds a recovery tank, JIC lines and a vacuum pump, and Turnkey adds a vacuum oven and scale.

A passive, fully sealed 1 lb (450 g) closed-loop botanical extraction column in polished 304 stainless steel, rated 150 psi with Buna-N gaskets. Pressure is changed by temperature rather than by a recovery pump, so no solvent is vented to air. Supplied with a 6″ hemispherical lid (3x 1.5″ tri-clamp, 2x 1/2″ FNPT, 2x 1/4″ FNPT), a 3″ filter plate with 100 micron mesh, Superlok ball valves and two 150 psi ASME relief valves. Designed for use with pure butane.

Peer-reviewed 10 lb closed-loop butane system: two 6″ × 48″ material columns, a 6″ × 12″ CRC and a jacketed 200 lb / 100 L collection tank.