Written and maintained by CASRAI Editorial Board
Published · Last updated
On this page
Short answer
“Air cast arm” has no single product behind it. “Aircast” is a brand name, and people often use it as a generic word for an air-cell support or boot. For the arm, the regulatory category is a limb orthosis (brace), which the FDA defines in 21 CFR 890.3475 to include upper-extremity devices such as a hand splint. This page describes products and general terminology; it is not medical advice, and what to wear after an injury is a clinician’s decision.
What is an air cast for arm?
An “air cast for arm” is a search phrase, not a device category. Two separate things sit behind it. First, “Aircast” is a trademarked brand name rather than a regulatory term. Second, the FDA’s term for a brace worn on an arm or leg is a limb orthosis. Someone who types “air cast arm” may mean a branded product, a generic inflatable-style support, or simply a removable arm brace.
Definition and scope
Under 21 CFR 890.3475(a), a limb orthosis (brace) is “a device intended for medical purposes that is worn on the upper or lower extremities to support, to correct, or to prevent deformities or to align body structures for functional improvement.” The regulation lists examples: a whole limb and joint brace, a hand splint, an elastic stocking, a knee cage, and a corrective shoe. Upper-limb braces and hand splints are therefore inside the definition. The same section does not mention air cells, pumps or any brand.
It also helps to separate the term from rigid casting. Plaster and fiberglass casting is a separate topic; see cast tape and sugar-tong splints for that side. For the general idea of splinting, see what a splint is.
What are air casts used for?
The FDA definition above states the purpose of limb orthoses as a group: to support, correct or prevent deformities, or to align body structures for functional improvement. Beyond that, the answer depends on the specific product and its labeling, which is where a manufacturer’s intended-use statement appears. Which device suits a given injury is for a treating clinician to decide.
What is an Aircast used for?
Because Aircast is a brand with many product lines, the use depends on the line, and the labeling of the specific product is the authority. Cold-and-compression cuffs and support braces are different kinds of product: see cryotherapy cuffs for the cold-and-compression category, and ankle brace types and walking boot sizes for lower-limb supports.
Air cast for broken foot and air cast hand
These are variants of the same naming question. An “air cast for a broken foot” usually refers to a lower-limb boot or stirrup-style support, covered in the lower-limb guides linked above, and an “air cast hand” refers to a hand or wrist support, which falls under the FDA’s hand splint example. Whether any such device is appropriate for a particular injury is a clinician’s decision.
Terms that get mixed up
| Term | What it refers to | Source |
|---|---|---|
| Aircast | A brand name; it does not appear in the federal regulation for braces | 21 CFR 890.3475 |
| Limb orthosis (brace) | The FDA’s device term for a brace worn on an upper or lower extremity | 21 CFR 890.3475(a) |
| Hand splint | Named in the regulation as an example of a limb orthosis | 21 CFR 890.3475(a) |
Where it matters for clinics and supply decisions
The regulation gives a concrete, checkable fact for anyone sourcing braces: a limb orthosis is Class I (general controls) and is exempt from premarket notification (510(k)), subject to the limitations in 21 CFR 890.9. It is also exempt from the quality management system requirements in part 820 except those concerning records and complaint files (section 820.35). In practice, a supplier should be able to tell you the product’s FDA device name and class, and the exemption means no 510(k) number is expected for this device type.
Questions a supplier can answer in writing:
- Is the product a support brace, a splint, or a cold-and-compression cuff?
- Which limb and side is it labeled for, and where are the instructions for use?
- What warnings does the labeling carry?
- Is the listing a brand name or a generic description?
For how braces are coded for billing, see HCPCS codes for wrist braces.
Common misunderstandings
- “Air cast” is a product type. Aircast is a brand name; the FDA category is limb orthosis.
- An air cast is the same as a plaster or fiberglass cast. Those are rigid casting materials (see the cast tape guide above); “air cast” is a different, brand-derived phrase.
- Cold cuffs and support braces are the same thing. They are different product categories with their own labeling.
- Class I means no rules. Class I devices remain under general controls, and the complaint-file and records requirements still apply.
FAQ
What are air casts used for?
As a group, limb orthoses are defined by the FDA as devices to support, correct or prevent deformities, or to align body structures. The specific use depends on the product’s labeling and on a clinician’s advice.
What is an air cast for arm?
It is a search phrase rather than one product. It can mean a branded Aircast product, a generic air-cell support, or an upper-limb brace, which the FDA classifies as a limb orthosis (Class I).
What is an Aircast used for?
Aircast is a brand with several product lines, so the use depends on the line. Check the labeling of the specific product.
Sources
- U.S. Food and Drug Administration, 21 CFR 890.3475 Limb orthosis (eCFR, current text): https://www.ecfr.gov/current/title-21/section-890.3475 (checked 2026-11-01).
- Legal Information Institute, 21 CFR 890.3475: https://www.law.cornell.edu/cfr/text/21/890.3475 (checked 2026-11-01).







