Written and maintained by CASRAI Editorial Board
Published · Last updated
On this page
Not medical advice. This page describes what chest seal kits contain and what to check on a kit’s label and regulatory record. It is general product information, not training, and it does not explain how to treat an injury.
A chest seal kit is a pack that bundles one or more chest seals, adhesive dressings made for wounds that penetrate the chest wall, with the small items that go with them. Whoever stocks first-aid, EMS or tactical kits needs to know three things: what the contents are, how the seals differ (vented or occlusive), and how to confirm a product’s regulatory status. Product pages differ on that last point, so the record is worth reading directly.
Purpose and setting
Chest seal kits are used in trauma modules such as those described in EMT bag and EMS equipment. A seal pack is a different item from the larger set types covered in Wayne pneumothorax kit. A needle decompression kit, sometimes called a tension pneumothorax kit, is a separate product class again; see decompression needle. For drainage devices, see chest tube. This page covers only the seal-based kit.
Worked example: two real kit specifications
Two published specifications show how much “chest seal kit” can vary. Facts below are as stated by the record or manufacturer page named, checked 2026-11-04.
| Item | H&H Penetrating Chest Injury Kit | USMC HyFin Chest Seal Combo Pack (North American Rescue) |
|---|---|---|
| Contents | One Bolin Chest Seal and one Wound Seal Kit | One HyFin Vent chest seal and one HyFin Occlusive chest seal |
| Packaging | Listed as a single-use device, packaged sterile | Each seal in its own foil pouch, marked by name and colour |
| Size | Not listed in the record | Each seal 6 x 6 in, with a gauze pad for wiping the wound surface |
| Latex | Record lists the label “Not made with natural rubber latex” | Manufacturer states 100% latex free |
| Product code | NAD, Dressing, Wound, Occlusive | Not listed |
| Folded pack | Not listed | 7.5 x 4.5 x 0.25 in, 2.5 oz |
Storage conditions, shelf life and expiry are set by the instructions for use (IFU) supplied with each product.
Checklist table
| Category | Item to check | Why | Notes |
|---|---|---|---|
| Seals | Seal types included: vented, occlusive or both | Kits differ; the HyFin combo pack pairs one of each | Typical in combo kits; single-seal kits are also sold |
| Seals | Number of seals | The H&H kit lists one seal plus a wound seal kit | Count is the manufacturer’s, not a guideline |
| Seals | Size | The HyFin seals are 6 x 6 in each | Confirm on the product sheet |
| Accessories | Wiping gauze | Included with each HyFin seal | Check each pouch, not only the outer pack |
| Packaging | Individual pouch with legible product name | HyFin pouches are marked by name and colour so the two types can be told apart | Typical, not universal |
| Labelling | Sterile and single-use statements | The H&H record lists both | Check the pack label against the record |
| Labelling | Latex statement | Both examples state no latex | Request it in writing for any other product |
| Labelling | Lot number and expiry on the pack | Needed for restocking records | Format varies by manufacturer |
| Documents | IFU or product information sheet | Storage, expiry and use limits are set in the IFU | Ask the supplier for the current version |
Vented and occlusive seals
A vented seal has one or more channels built into it; the HyFin Vent seal has three. An occlusive seal has no channel. Combo packs exist because each type is also sold separately. Choosing between them in use is a matter for trained responders and their medical director, and is outside this page.
What varies by facility type
Typical differences are in how many packs are held and where they are carried, not in the product itself. An ambulance trauma module, a workplace first-aid station and a field-research kit may each hold a different count, and this page sets no count for any setting. Use your own protocol or medical director’s equipment list. For hospital emergency carts, see crash cart.
Storage, expiry and restocking
Follow the manufacturer’s labelled storage conditions and expiry date on the pack and IFU. Record lot number and expiry at receipt, check them at each kit inspection, and replace packs whose pouches are damaged or whose expiry has passed. Specific temperature ranges and shelf life differ by product and are not stated here.
Regulatory record: what to read
The FDA’s generic rule for occlusive wound dressings, 21 CFR 878.4020 (eCFR text current as of 2026-10-01, checked 2026-11-04), describes a nonresorbable, sterile or non-sterile device that covers a wound and allows exchange of gases such as oxygen and water vapour, made of a synthetic polymer such as polyurethane, with or without adhesive backing. It classifies that device as Class I (general controls), exempt from premarket notification under part 807, subpart E, subject to the limitations in 21 CFR 878.9. That rule is generic. It does not mean every chest seal is Class I or exempt. A given product’s status appears in its own FDA record.
AccessGUDID, the National Library of Medicine’s public device database, shows that record. For the H&H kit (device identifier 00857048006170) it lists product code NAD (Dressing, Wound, Occlusive), the GMDN term “Pneumothorax dressing”, a premarket submission field of exempt, sterile as yes, and single-use. Look up the device identifier printed on a pack and compare these fields with the supplier’s claims.
FAQ
What is in a chest seal kit?
It varies. Two published examples: one Bolin Chest Seal plus a wound seal kit (H&H), and one vented plus one occlusive 6 x 6 in seal (North American Rescue). Check the contents list of the specific product.
Is a needle decompression kit the same thing?
No. A needle decompression kit is a separate product; see decompression needle. A tension pneumothorax kit may contain seals, a needle or both, depending on the manufacturer, so read the contents list.
Are chest seals Class I and exempt from FDA premarket review?
The generic occlusive-dressing rule is Class I and exempt, but each product’s status is shown in its own FDA record, such as an AccessGUDID entry.
How do I find a kit’s expiry and storage conditions?
On the pack label and the manufacturer’s IFU. Request the IFU from the supplier.
Sources
- eCFR, 21 CFR 878.4020 Occlusive wound dressing: https://www.ecfr.gov/current/title-21/section-878.4020 (text current as of 2026-10-01; checked 2026-11-04).
- NLM AccessGUDID, H&H Penetrating Chest Injury Kit, DI 00857048006170: https://accessgudid.nlm.nih.gov/devices/00857048006170 (checked 2026-11-04).
- North American Rescue, USMC HyFin Chest Seal Combo Pack product page: https://narescue.com/usmc-hyfin-chest-seal-combo-pack.html (checked 2026-11-04).







