Written and maintained by CASRAI Editorial Board
Published · Last updated
On this page
General product information only, taken from the manufacturer’s instructions for use (IFU) and a regulator notice. This page is not medical advice and gives no placement instructions; follow the IFU for the exact catalog number in your hands.
The “Wayne pneumothorax kit” is a family of sets made by Cook Incorporated, not a single product. Cook publishes two separate IFUs for it: one for trocar placement and one for a modified set for Seldinger placement. The two differ in their components, so a procurement or clinical-engineering reader should first identify which set a catalog number belongs to, then check that the IFU on file matches it.
What the Wayne pneumothorax set is
Both IFUs state the same intended use: “relief of simple, spontaneous, iatrogenic and tension pneumothorax.” Both say the set is intended for physicians trained and experienced in the treatment of a pneumothorax, and both carry the US federal-law restriction that sale is to or on the order of a physician (or properly licensed practitioner). Under warnings, both state “None known.” (Cook IFUs C_T_WAYNE_REV12 and C_T_WAYNEMOD_REV5, checked 2026-11-01.)
For neighbouring device types, see the CASRAI guides on the chest tube and the decompression needle; this page covers only the Wayne sets.
Trocar vs Seldinger sets compared
The table reproduces the “Device Description” paragraph of each IFU, component by component.
| Component | Wayne set for trocar placement (REV12) | Modified Wayne set for Seldinger placement (REV5) |
|---|---|---|
| Introducing hardware | Stainless steel needle obturator with Peel-Away spacer | Access needle(s), stainless steel wire guide, appropriately sized dilator |
| Catheter | Radiopaque polyurethane catheter | Radiopaque polyurethane catheter |
| Connecting tube | Polyvinylchloride connecting tube | Polyvinylchloride connecting tube |
| Stopcock | Plastic three-way stopcock | Plastic three-way stopcock |
| Valve | Latex-free Cook Chest Drain Valve, to be used for evacuation of air or fluid | Latex-free Cook Chest Drain Valve, to be used for evacuation of air or fluid |
The practical difference is the introducing hardware: an obturator with spacer in the trocar set; access needle(s), wire guide and dilator in the Seldinger set. The trocar-set IFU also mentions 2.5 cm markers on the catheter.
What is and is not in the box
The IFU device descriptions list the device components above. They do not list the wider contents of a procedure tray (drapes, antiseptic, gauze, suture or similar). Those items vary by tray configuration and distributor, and the Cook IFUs do not specify them, so treat any tray contents list as a separate document to request from whoever supplies the tray. The IFU also publishes the phthalate precaution that the effects on pregnant or nursing women or on children are not fully characterized.
Sets sold under other manufacturers’ names are different products with their own IFUs; this page covers only the Cook Wayne IFUs above.
Documents to ask for
- The current IFU for the exact catalog number. The IFUs cited on this page are revision 12 (trocar set) and revision 5 (Seldinger set), checked 2026-11-01. Revisions change, so confirm the revision against the product you hold.
- The IFU language you need. Both IFUs are published in multiple languages, including English, Danish, German, Norwegian and Swedish.
- The sales restriction. The IFUs state sale is restricted to or on the order of a physician or properly licensed practitioner, so confirm who may order the set within your own organization.
- Field safety notice history. See the next section.
Field safety notice history
The German federal institute BfArM published field safety notice 01001/10 on 2010-03-26 concerning Cook Incorporated (USA) Wayne pneumothorax and pleural sets or trays. The notice concerns “disconnections of the catheters from the luer lock hub” and describes an addendum to the Instructions for Use. The BfArM page does not give lot numbers or counts. It is a reason to ask the supplier for the notice history of the specific catalog number and to read the current IFU, not a statement about any product on the market today (BfArM, checked 2026-11-01).
FAQ
What is the difference between a pneumothorax kit and a chest tube kit?
The Wayne set is described in its IFU as a catheter set with a connecting tube, three-way stopcock and chest drain valve for evacuation of air or fluid. A chest tube is covered in its own guide. This page does not advise on which device suits any situation; that is outside its scope.
Is the Wayne pneumothorax kit one product?
No. Cook publishes one IFU for trocar placement (REV12) and a separate IFU for the modified set for Seldinger placement (REV5), with different introducing components.
Is a Cook Wayne kit the same as an Arrow pneumothorax kit?
No. Wayne is the name Cook uses for its sets in the IFUs cited here. A set from another manufacturer is a different product with its own IFU, so compare components only from each manufacturer’s own IFU.
Where can I read what the kit is for?
Read the intended use and labeling in the manufacturer’s IFU, linked in the Sources section. For other emergency and thoracic supplies see the EMS equipment overview and the explainer on the trocar, and for a drain with a different design see the Blake drain guide.
Sources
- Cook Medical, Instructions for Use, Wayne Pneumothorax Set for Trocar Placement, C_T_WAYNE_REV12 (checked 2026-11-01): https://ifu.cookmedical.com/data/IFU_PDF/C_T_WAYNE_REV12.PDF
- Cook Medical, Instructions for Use, Modified Wayne Pneumothorax Set for Seldinger Placement, C_T_WAYNEMOD_REV5 (checked 2026-11-01): https://ifu.cookmedical.com/data/IFU_PDF/C_T_WAYNEMOD_REV5.PDF
- BfArM, Field Safety Notice 01001/10, 2010-03-26 (checked 2026-11-01): https://www.bfarm.de/SharedDocs/Kundeninfos/EN/07/2010/01001-10_kundeninfo_en.html







