Skip to main content
v2026.11,986 entries · CC-BY 4.0
LAC HealthSponsored

Shop dimensional weight supplies

  • FDA registered
  • ISO 13485
  • BBB Accredited A+

Shop at LAC Health

Dimensional Weight: Formula, Divisor 139 and How FedEx and USPS Bill It

Dimensional weight explained: the length x width x height / 139 formula, how FedEx and USPS rounding differ, and a worked example for supply cartons.

Written and maintained by CASRAI Editorial Board

Published · Last updated

On this page

Short answer: dimensional weight (dim weight) is a carrier’s way of pricing the space a parcel takes up. The carrier compares the parcel’s actual weight with its volume-based weight and bills the greater of the two. For FedEx and USPS Priority Mail the volume-based weight is length x width x height in inches divided by 139.

This page is general shipping information for lab, clinic and supply staff who receive or order boxed consumables. It is not legal, customs or purchasing advice, and it states no prices.

Definition and scope

FedEx defines dim weight as “the amount of space a package occupies in relation to its actual weight” (FedEx, “What is Dimensional Weight?”, checked 2026-11-03). Light, bulky parcels occupy more truck and aircraft space than their scale weight suggests, so carriers bill them as if they were heavier. Two terms matter: actual weight is what the parcel weighs on a scale, and dimensional weight is the calculated figure. FedEx states you are charged on whichever is greater; USPS says the same for qualifying Priority Mail parcels. The greater figure is often called the billable weight.

The formula (inches, divisor 139)

Measure the outside of the carton, not the product inside it.

  1. Measure length, width and height in inches.
  2. Round each measurement (the rounding rule depends on the carrier, see the next section).
  3. Multiply the three numbers to get cubic inches.
  4. Divide by 139. FedEx’s US page gives this divisor for U.S., Puerto Rico and international shipments; USPS DMM 123 uses 139 for Priority Mail Zones 1-9.
  5. Compare the result with the scale weight and use the larger.

A dimensional weight calculator is nothing more than these five steps automated. If you can multiply three numbers and divide by 139, you can check any online calculator’s answer.

Rounding and threshold rules differ by carrier

FedEx and USPS do not apply the formula identically.

Rule FedEx (US page) USPS Priority Mail (DMM 123)
Divisor 139 139
Rounding of each dimension Nearest whole inch Up to the next whole inch
When dim weight applies Billed on the greater of dimensional or actual weight Only parcels exceeding 1 cubic foot (1,728 cubic inches)
Rounding of the result Not stated on the FedEx US page Round up to the next whole number
Nonrectangular parcels Not stated on the FedEx US page Multiply the extreme-point volume by 0.785 before dividing
Cap Not stated on the FedEx US page If dimensional weight exceeds 70 lb, the customer pays the 70-lb price

Other carriers (UPS, DHL and regional couriers) publish their own divisors and rounding rules; check the carrier’s current rate guide before relying on 139. Many third-party articles quote a different USPS divisor, but USPS’s own Domestic Mail Manual text for Priority Mail uses 139.

Worked example (illustrative)

Suppose a supplier’s carton of lightweight foam-packed consumables measures 20.4 x 15.6 x 13.2 inches and weighs 6 lb on a scale. This is a made-up carton used only to show the arithmetic.

  • FedEx-style rounding (nearest inch): 20 x 16 x 13 = 4,160 cubic inches; 4,160 / 139 = 29.9 lb dimensional weight. This exceeds the 6 lb actual weight, so the dimensional figure is the billable basis.
  • USPS Priority Mail rounding (up): 21 x 16 x 14 = 4,704 cubic inches. That is above 1,728, so dim weight applies; 4,704 / 139 = 33.8, rounded up to 34 lb.

The same box produces a different billable figure under each rule, which is why the carrier named on the quote matters.

Where it matters for labs, clinics and supply decisions

Dim weight is a property of how a carrier bills a parcel, so the useful question at receiving or ordering time is what data you can capture. A short checklist for receiving and ordering:

  • Record the outside length, width and height of each inbound carton and its scale weight, so you can compare actual and dimensional weight yourself.
  • Note which carrier and service the shipment used, because divisor, rounding and thresholds are carrier-specific.
  • Remember that parcels below 1,728 cubic inches are outside the USPS Priority Mail dim weight rule.
  • Treat a carton’s packed dimensions as a shipping attribute separate from the product’s own size. A box of foam-packed items can be much larger than its contents; hospital bed mattress dimensions shows how a product’s own size is specified separately from its packaging. Precision instruments are shipped in packed cartons too; see the pharmaceutical balance guide for the equipment itself.

For recurring orders, the same carton data can feed an ordering checklist such as a hospice supply checklist, and large equipment purchases sit within wider procurement decisions such as equipment lease versus loan.

Common misunderstandings

Dim weight is not a separate fee

It is a way of choosing the weight used for pricing. The carrier still bills the greater of dimensional and actual weight.

A dimensional weight calculator does not apply to every carrier or service

A calculator uses one divisor and one rounding rule. FedEx and USPS differ on rounding, as shown above.

Small parcels are not always affected

USPS applies the Priority Mail rule only above 1 cubic foot.

FAQ

What is dimensional weight?

The billable weight a carrier calculates from a parcel’s volume. It is billed when it exceeds the parcel’s actual weight.

What is dim weight?

“Dim weight” is short for dimensional weight; the two terms mean the same thing.

How do I use a dimensional weight calculator?

Enter length, width and height in inches, apply the carrier’s rounding, multiply, and divide by the carrier’s divisor (139 for FedEx and USPS Priority Mail). Compare the result with actual weight and use the greater.

Sources

Follow CASRAI

Research-administration guidance, standards updates and independent tool reviews.

Ask CASRAI · free to try

Ask about Dimensional Weight: Formula, Divisor 139 and How FedEx and USPS Bill It

2 free questions a day, no account.

An AI assistant for research: funder rules, compliance, methods and publishing. It links the sources behind its answers and labels answers that come from a web search.

Answers draw on CASRAI's guides and dictionary plus the federal and funder documents we index: Federal Register, Grants.gov, Regulations.gov and UKRI.

Works on this site and inside Claude, Cursor and the AI tools you already use.

Everything CASRAI publishes — this page, the dictionary, the guides and the news — stays open to read, with no account and no card.

Referenced across the research world

University of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logoUniversity of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logo
  • University of Cambridge logo
  • Columbia University logo
  • Crossref logo
  • University of Edinburgh logo
  • Harvard University logo
  • University of Oxford logo
  • Princeton University logo
  • Stanford School of Medicine logo
  • University College London logo
  • ORCID logo

View CASRAI adoption →