Skip to main content
v2026.11,986 entries · CC-BY 4.0

Experiments in Fluids: Journal Scope, Impact Factor, and Author Guide

A researcher guide to the Experiments in Fluids journal, covering its 2.7 impact factor, editorial scope, hybrid open access fees, and submission workflow.

Written and maintained by CASRAI Editorial Board

Published

On this page

The Experiments in Fluids journal is an international peer-reviewed academic publication founded in 1983 and published monthly by Springer Berlin Heidelberg (Springer Nature). Operating under print ISSN 0723-4864 and electronic ISSN 1432-1114, the journal specializes in new engineering techniques for flow-related measurement and experimental investigations into underlying flow physics across aerodynamics, hydrodynamics, turbulence, and multiphase fluid dynamics.

Journal Profile and Publishing Identity

Established as a dedicated venue for experimental fluid mechanics, Experiments in Fluids serves researchers, mechanical engineers, aerospace scientists, and chemical engineers who develop or apply diagnostic instrumentation to fluid motion. Founding editors W. Merzkirch of Freiburg and J. H. Whitelaw of London established the journal to bridge laboratory instrumentation development with physical flow interpretation. The publication is registered in the United States National Library of Medicine catalog under NLM ID 101515895 and holds the bibliographic CODEN designation EXFLDU.

The journal operates on a monthly publication cycle. Across more than four decades of continuous reporting, the journal has cataloged thousands of fundamental fluid investigations. According to bibliographic records in the OpenAlex scholarly database, the publication holds over 7,000 scholarly records receiving more than 260,000 total citations across global engineering and physical sciences literature.

Indexing coverage is broad across physical, mathematical, and engineering databases. The journal is abstracted and indexed across 27 major international databases, including Clarivate’s Science Citation Index Expanded (SCIE), Elsevier’s Scopus, EI Compendex, the INSPEC database from the Institution of Engineering and Technology, Chemical Abstracts Service (CAS), the Astrophysics Data System (ADS), Current Contents/Engineering, Computing and Technology, and Google Scholar.

Aims, Scope, and Experimental Requirement

The editorial mission of Experiments in Fluids rests on two complementary scientific pillars: the advancement, extension, and improvement of novel techniques of flow-related measurement, and the application of established experimental techniques to deepen the physical understanding of complex flow phenomena. The journal covers fluid systems spanning microscopic microfluidic chambers to massive atmospheric and geophysical scales.

The official aims and scope explicitly encompass several core subject disciplines:

  • Turbulence and Transition: Boundary layer transition, coherent structures, Reynolds shear stress distributions, and turbulent mixing.
  • Aerodynamics and Hydrodynamics: Airfoil flows, vortex shedding, wake dynamics, bluff body aerodynamics, and marine hydrodynamics.
  • Compressible and High-Speed Flows: Shock wave boundary layer interactions, supersonic jet expansion, and high-enthalpy flow diagnostics.
  • Convective Heat Transfer and Combustion: Thermal plumes, reacting flows, flame front propagation, and spray evaporation.
  • Turbomachinery and Industrial Flows: Rotor-stator blade interactions, diffuser flows, pump impeller aerodynamics, and vortex-induced vibrations.
  • Multiphase and Interfacial Flows: Droplet dynamics, bubble oscillations, cavitation phenomena, and granular suspensions.
  • Biological, Medical, and Geological Flows: Hemodynamics in vascular conduits, biofluid locomotion, volcanic dispersions, and aquifer flows.

A central editorial policy distinguishes Experiments in Fluids from purely computational mechanics journals: the dominant component of any accepted paper must be experimental. While the journal welcomes papers that combine experimental investigations with analytical modeling or computational fluid dynamics (CFD), numerical simulations alone are ineligible for publication. CFD simulations must serve to validate, complement, or interpret high-resolution laboratory measurements.

The journal accepts three distinct article formats: Original Research Articles presenting substantial experimental programs; Correspondence articles (formerly published under the Letters format) providing rapid communication of technical developments or scientific discussions; and comprehensive Review Articles synthesizing measurement methodologies or physical insights.

What is the impact factor of the journal Experiments in Fluids?

According to the 2025 release of Clarivate’s Journal Citation Reports, the Journal Impact Factor of the journal Experiments in Fluids is 2.7. The journal also holds a 5-year Journal Impact Factor of 2.9, reflecting durable long-term citation performance across mechanical engineering and applied physics literature. Evaluation of editorial speed shows a median turnaround time from manuscript submission to first decision of 7 days, providing rapid initial triage for submitting authors.

In scholarly publishing, a Journal Impact Factor measures the ratio of citations received in a given year by articles published in the preceding two years relative to the total number of citable items published in those years. Authors tracking publication metrics can learn more about evaluation thresholds in our guide to journal impact factor and quartile rankings. Within Elsevier’s Scopus database, Experiments in Fluids registers a CiteScore of approximately 4.5 to 4.6. Researchers comparing metric methodologies can explore the mathematical differences between these two indices in our analysis of CiteScore vs. impact factor.

Bibliometric rankings in the SCImago Journal Rank (SJR) index position Experiments in Fluids with a score of 0.724, placing the publication in Quartile 1 (Q1) across subject categories including Computational Mechanics and Fluid Flow and Transfer Processes. Furthermore, reader engagement across the scientific community is demonstrated by article usage, with annual full-text downloads on the Springer Nature Link platform reaching 969.6k in 2025.

What are some examples of fluids?

In physics and fluid dynamics, a fluid is formally defined as any state of matter that deforms continuously and flows under the application of an applied shear stress, regardless of how small that shear stress may be. This fundamental property distinguishes fluids from solids, which resist shear through static elastic deformation. Fluids encompass liquids, gases, vapors, supercritical fluids, and plasmas.

Fluids are categorized into distinct classes based on their constitutive relationships between applied shear stress and shear strain rate:

  • Newtonian Fluids: Fluids where shear stress is directly proportional to velocity gradient, maintaining constant dynamic viscosity (μ) at a given temperature and pressure. Common examples include pure liquid water, ambient air, mineral oils, ethanol, and gasoline.
  • Non-Newtonian Shear-Thinning Fluids: Materials whose apparent viscosity decreases as shear strain rate increases. Prominent biological and industrial examples include human blood, polymer solutions, synthetic paints, and ketchup. In blood flow, shear-thinning permits red blood cell deformation through capillaries.
  • Non-Newtonian Shear-Thickening Fluids: Suspensions whose apparent viscosity increases abruptly under elevated shear rates. Examples include concentrated cornstarch suspensions in water and dense silica suspensions used in impact energy absorption.
  • Viscoelastic Fluids: Complex materials exhibiting both viscous liquid flow and elastic solid-like recoil under deformation. Biological fluids including synovial fluid, mucus, and cellular cytoplasm display viscoelasticity.
  • Compressible Gases: Gaseous media such as air, nitrogen, helium, and combustion gases where pressure gradients induce substantial density changes. At speeds exceeding 30 percent of the speed of sound (Mach number ≥ 0.3), compressibility effects dominate. Theoretical foundations are detailed in the profile of the Journal of Fluid Mechanics.

What are some examples of science experiments that use fluids?

Experimental science uses fluid experiments to validate aerodynamic designs, study cardiovascular hemodynamics, optimize chemical mixing, and investigate turbulent transport. Researchers employ specialized flow facilities such as water flumes, wind tunnels, tow tanks, and microfluidic cells paired with advanced non-intrusive optical measurement instrumentation.

Major laboratory science experiments utilizing fluids include:

  1. Particle Image Velocimetry (PIV) in Aerodynamic Wakes: Researchers seed an air stream inside a wind tunnel with microscopic tracer particles, such as sub-micron oil droplets. A pulsed Nd:YAG laser sheet illuminates a planar cross-section of the flow twice within a microsecond interval (Δt). Digital cameras record particle positions, and cross-correlation algorithms calculate instantaneous velocity vector fields.
  2. Laser Doppler Velocimetry (LDV) of Turbulent Pipe Flow: Two coherent laser beams intersect inside a transparent test section filled with water or oil, generating a microscopic interference fringe pattern. Scattered light fluctuates at a Doppler frequency proportional to particle velocity, providing point measurements with megahertz temporal resolution.
  3. Schlieren and Shadowgraph Imaging of Supersonic Shock Waves: Optical collimating mirrors and a knife-edge filter detect spatial density gradients (ρ) in high-speed wind tunnels, capturing shock waves and thermal buoyant plumes.
  4. Planar Laser-Induced Fluorescence (PLIF) in Chemical Mixing: Fluorescent dye molecules, such as rhodamine B or fluorescein, are injected into a fluid stream and excited by an expanded laser sheet. Emitted fluorescent intensity correlates with scalar concentration, allowing researchers to measure molecular mixing rates without intrusive probes.
  5. Microfluidic Droplet Formation and Cell Encapsulation: Immiscible fluids—typically a fluorinated carrier oil with surfactant and an aqueous biological buffer—are driven through microfabricated cross-junctions on a chip. Controlled shear forces pinch off uniform picoliter droplets exceeding 10,000 droplets per second for single-cell analysis.
  6. Hot-Wire Anemometry in Boundary Layer Channels: An ultra-fine platinum or tungsten wire heated by an electrical current is positioned within a boundary layer. Convective heat loss alters wire electrical resistance, which anemometer circuits convert into continuous voltage signals to capture high-frequency turbulent velocity fluctuations.

Editorial Structure and Peer Review Process

Editorial leadership of Experiments in Fluids is coordinated by an international team of Editors-in-Chief supported by specialized Associate Editors. The Editors-in-Chief are Christian J. Kähler (Universität der Bundeswehr München), Ellen K. Longmire (University of Minnesota), and Jerry Westerweel (Delft University of Technology). Each editor oversees distinct subfields spanning optical flow diagnostics, multi-phase turbulence, and microfluidic mechanics.

The journal enforces a single-blind peer review system. In this model, external expert reviewers evaluate manuscript submissions with full knowledge of author identities and institutional affiliations, while reviewer identities remain strictly confidential to the authors. Researchers can review the operational trade-offs of this framework in our comparative guide on single-blind vs. double-blind vs. open peer review.

Manuscript evaluation hinges on specific technical criteria that reflect the journal’s experimental focus:

  • Experimental Novelty: Submissions must either present an advancement in measurement instrumentation (such as volumetric particle tracking or novel optical techniques) or deliver new physical insight into fluid dynamics through rigorous experimental execution.
  • Rigorous Uncertainty Quantification: Manuscripts lacking systematic uncertainty analysis are routinely rejected during initial screening. Authors must present comprehensive measurement uncertainty budgets detailing systematic bias, random uncertainty, calibration procedures, and sensor spatial resolution limits.
  • Repeatability and Experimental Documentation: Authors must comprehensively describe experimental facility dimensions, fluid thermophysical properties, boundary conditions, Reynolds numbers, and seeding particle Stokes numbers.

Publishing Economics, Open Access, and Author Fees

Experiments in Fluids operates under a hybrid publishing model, providing authors two distinct publishing pathways upon manuscript acceptance. To evaluate publishing models and funder alignment, authors can consult our analysis of gold vs. green vs. diamond vs. hybrid open access.

Under the traditional subscription-based publishing pathway, authors incur zero article processing charges ($0 APC). Accepted manuscripts are published at no direct cost to the author, with content made available to libraries, universities, and individual subscribers via the Springer Nature Link database. Authors choosing this route retain copyright under standard publishing agreements and may deposit accepted author manuscripts in institutional repositories according to green open access self-archiving embargo terms.

Alternatively, authors may elect the Gold Open Access option under Springer’s Open Choice program. Under this route, the final published version of record is released immediately under a Creative Commons attribution license (typically CC BY 4.0), permitting unrestricted global reading, sharing, and re-use. The Article Processing Charge (APC) for Experiments in Fluids is £2,690.00 GBP / $4,090.00 USD / €3,090.00 EUR, subject to local value-added tax (VAT) or regional taxes where applicable.

Many authors fulfill this fee through institutional transformative agreements established between Springer Nature and university library consortia worldwide (such as Projekt DEAL in Germany, Jisc in the United Kingdom, and the University of California system), which cover open access publication fees on behalf of affiliated corresponding authors.

How to Prepare and Submit a Manuscript

Preparing and submitting a manuscript to Experiments in Fluids requires adherence to standardized technical workflows established by Springer Nature. Following these structured steps streamlines editorial evaluation and reduces initial technical check delays:

  1. Verify Scope Alignment and Dominant Experimental Focus: Confirm that your manuscript’s primary scientific contribution is grounded in experimental laboratory data. If your paper combines numerical simulations with experiments, verify that experimental measurement represents the dominant component.
  2. Format Text and High-Resolution Diagnostic Figures: Structure the manuscript using standard scientific sections (Introduction, Experimental Setup and Instrumentation, Measurement Uncertainty Analysis, Results and Discussion, Conclusions). Prepare vector graphics for diagrams and export experimental flow visualization imagery as 300 to 600 DPI TIFF or EPS files. Video supplements depicting unsteady flow fields may be submitted as multimedia appendices.
  3. Formulate the Measurement Uncertainty Budget: Calculate random and systematic uncertainties across all measured variables using accepted standards (such as ASME PTC 19.1 or ISO GUM). Incorporate explicit error bars on line plots and state confidence intervals in tabular data.
  4. Access the Springer Nature Snapp Submission Platform: Navigate to the official manuscript submission portal at https://submission.nature.com/new-submission/348/3. Log in using your Springer Nature or ORCID authentication credentials.
  5. Upload Files and Complete Declarations: Upload the primary manuscript file (LaTeX source or Microsoft Word), separate figure files, and supplementary datasets. Provide a concise cover letter outlining the experimental significance of the work, input CRediT contributor role statements, confirm data availability, and suggest at least four independent international reviewers with expertise in fluid diagnostics.
  6. Track Peer Review and Prepare Revisions: Monitor manuscript progression through the automated tracking system. Upon receiving reviewer reports, construct a point-by-point response letter accompanied by a tracked-changes manuscript copy addressing every technical critique.

Journal Comparison and Alternatives

Researchers in fluid mechanics select target journals based on whether their investigation emphasizes experimental instrumentation, pure theoretical physics, or industrial fluid machinery. The table below outlines how Experiments in Fluids compares against prominent peer-reviewed journals in fluid dynamics and experimental measurement.

Journal Title Publisher Primary Focus Dominant Methodology Publication Model
Experiments in Fluids Springer Nature Flow measurement techniques and flow physics Experimental (mandatory dominant component) Hybrid (Subscription or Gold OA)
Journal of Fluid Mechanics Cambridge University Press Fundamental fluid mechanics and theoretical principles Theoretical, computational, and experimental Hybrid (Subscription or Gold OA)
Physics of Fluids AIP Publishing Dynamics of gases, liquids, and complex fluids Theoretical, numerical, and experimental Hybrid (Subscription or Gold OA)
Physical Review Fluids American Physical Society Fundamental fluid dynamics and physics Theoretical, computational, and experimental Hybrid (Subscription or Gold OA)
Measurement Science and Technology IOP Publishing Instrumentation and measurement science across physics Experimental instrumentation and sensors Hybrid (Subscription or Gold OA)
Flow Cambridge University Press Applications and mechanics of fluid flow Computational, experimental, and translational Gold Open Access

While venues such as the Journal of Fluid Mechanics and Physics of Fluids publish experimental work alongside mathematical modeling and direct numerical simulations (DNS), Experiments in Fluids remains the dedicated archival journal centered on flow diagnostics, optical velocimetry development, and laboratory measurement techniques.

Frequently asked questions

What is the impact factor of the journal Experiments in Fluids?

The Journal Impact Factor for Experiments in Fluids is 2.7 in the 2025 release of Clarivate’s Journal Citation Reports. The journal also holds a 5-year Journal Impact Factor of 2.9, a Scopus CiteScore of 4.5 to 4.6, and a median time from submission to first decision of 7 days.

What are some examples of fluids?

Fluids encompass any substance that flows continuously under shear stress. Examples include Newtonian fluids such as liquid water, ambient air, ethanol, and light oils; non-Newtonian shear-thinning fluids such as human blood, polymer melts, and paint; non-Newtonian shear-thickening fluids such as dense cornstarch suspensions; viscoelastic fluids such as mucus and synovial joint fluid; and compressible gases undergoing high-speed aerodynamic motion.

What are some examples of science experiments that use fluids?

Common laboratory science experiments using fluids include Particle Image Velocimetry (PIV) to map velocity vector fields in aerodynamic wind tunnels, Laser Doppler Velocimetry (LDV) to record turbulent velocity fluctuations in pipe flows, Schlieren optical imaging to visualize supersonic shock waves, Planar Laser-Induced Fluorescence (PLIF) to analyze scalar chemical mixing, microfluidic droplet generation on lab-on-a-chip devices, and hot-wire anemometry to quantify boundary layer turbulence.

How long does the peer review process take at Experiments in Fluids?

The journal reports a median time from submission to first decision of 7 days for initial triage. Manuscripts undergoing full external peer review typically receive reports within 6 to 12 weeks.

Can computational fluid dynamics (CFD) papers be submitted to Experiments in Fluids?

Purely computational or numerical papers cannot be submitted to Experiments in Fluids. The journal mandates that the dominant component of any published investigation must be experimental. Numerical simulations and CFD analyses are permitted only when combined with and validated against laboratory experimental measurements.

What is the article processing charge (APC) for Experiments in Fluids?

Publishing under the traditional subscription model incurs no fee ($0 APC). For authors electing immediate Gold Open Access under Creative Commons licensing, the current Article Processing Charge is £2,690.00 GBP / $4,090.00 USD / €3,090.00 EUR, plus applicable local taxes. Many corresponding authors have this fee covered through institutional transformative agreements.

Sources

Data: Experimental Fluid Dynamics Journals Comparison

Comparison of leading scholarly journals in experimental and applied fluid dynamics, compiling impact metrics, review models, access frameworks, and methodological requirements from publisher policies and catalog records.

Period covered: 2025/2026. Coverage: Global.

Experimental Fluid Dynamics Journals Comparison
Journal TitlePublisherJournal Impact Factor5-Year Impact FactorMedian First Decision (days)Publishing ModelDominant Methodology Requirement
Experiments in FluidsSpringer Nature2.72.97Hybrid Open AccessExperimental (dominant component mandatory)
Journal of Fluid MechanicsCambridge University Press3.73.845Hybrid Open AccessTheoretical, computational, and experimental
Physics of FluidsAIP Publishing4.14.328Hybrid Open AccessTheoretical, numerical, and experimental
Physical Review FluidsAmerican Physical Society2.52.735Hybrid Open AccessTheoretical, computational, and experimental
Measurement Science and TechnologyIOP Publishing2.42.530Hybrid Open AccessExperimental instrumentation and sensor development
FlowCambridge University Press2.12.240Gold Open AccessComputational, experimental, and applications

Sources

Compiled by CASRAI from the sources above. Free to reuse under CC BY 4.0 with attribution.

Follow CASRAI

Research-administration guidance, standards updates and independent tool reviews.

Ask CASRAI · free to try

Ask about Experiments in Fluids: Journal Scope, Impact Factor, and Author Guide

2 free questions a day, no account.

An AI assistant for research: funder rules, compliance, methods and publishing. It links the sources behind its answers and labels answers that come from a web search.

Answers draw on CASRAI's guides and dictionary plus the federal and funder documents we index: Federal Register, Grants.gov, Regulations.gov and UKRI.

Works on this site and inside Claude, Cursor and the AI tools you already use.

Everything CASRAI publishes — this page, the dictionary, the guides and the news — stays open to read, with no account and no card.

Referenced across the research world

University of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logoUniversity of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logo
  • University of Cambridge logo
  • Columbia University logo
  • Crossref logo
  • University of Edinburgh logo
  • Harvard University logo
  • University of Oxford logo
  • Princeton University logo
  • Stanford School of Medicine logo
  • University College London logo
  • ORCID logo

View CASRAI adoption →