Skip to main content
v2026.11,986 entries · CC-BY 4.0

Large Marine Ecosystems: 66 LME Boundaries and Research Use

Large marine ecosystems: the 66 LMEs, Arctic and European lists, map sources and how to cite LME boundary versions in research.

Written and maintained by CASRAI Editorial Board

Published

On this page

Large marine ecosystems (LMEs) are ocean regions of about 200,000 km² or more, defined by ecological criteria rather than political borders: bathymetry, hydrography, marine productivity and trophically linked populations. The IW:LEARN programme counts 66 LMEs worldwide, and researchers use them as ready-made, multi-country units for fisheries, pollution and biodiversity analysis. This guide covers the definition, the global, Arctic and European lists, and what a study must record so that its LME boundaries can be reproduced.

Definition and scope of a large marine ecosystem

The NOAA Fisheries record for its LME Program describes LMEs as “ocean regions of 200,000 km2 or greater that are defined by ecological criteria.” The record is owned by the NMFS Office of Science and Technology and lists the LME Program’s work as developing ecosystem management tools, funding partner projects and providing training, with the aim of supporting ecosystem-based management of marine resources.

IW:LEARN, the knowledge-sharing platform of the Global Environment Facility (GEF) International Waters portfolio, gives the fuller physical description. An LME is a coastal ocean area of about 200,000 km² or more that extends seaward to the break or slope of the continental shelf, or, where there is no shelf, to the outer edge of a well-defined current system. It is characterised by undersea topography, current and water-mass structure, marine productivity and food-chain interactions.

The Arctic Council’s PAME working group adds a delineation principle that matters for analysis: each LME spans the coast from river basins and estuaries to the outer margin of the continental shelf or the seaward extent of a predominant coastal current, and boundaries should follow natural ecological or geophysical discontinuities rather than cut through connected features. EMODnet, the European marine data service, describes LMEs in similar terms as areas of distinct seafloor structure, physical properties and biological communities that link estuaries and river basins with the open ocean.

For the wider field that LME work sits in, see what is oceanography and what is marine biology. This page is about the LME framework itself and how researchers cite and use it.

Large marine ecosystems list: how many, and who counts them

The number you will meet most often is 66. IW:LEARN states that there are 66 LMEs and calls them the most highly productive areas of the oceans, producing about 80% of the world’s annual marine wild-fisheries catch. EMODnet repeats the figure of 66 LMEs globally. The same IW:LEARN page quotes economic estimates, with direct services approaching US$3 trillion a year and non-market value of US$22 trillion a year. These are that programme’s own estimates, so cite them with the source and not as settled figures.

The global figure is a count; the names and polygons come from a boundary dataset, so a global analysis should take its names and polygons from the specific boundary dataset it uses and cite that dataset. Two regional lists are published by named bodies, and they show how the counts differ by owner and by year. The data table below puts them side by side.

The comparison reveals a few things a single-source page cannot show:

  • The Arctic Council’s 18 map numbers correspond to 17 distinct LME names, because the Bering Sea LME carries two numbers (9 and 11) and shares one factsheet.
  • Names recur across regional lists but are not always identical. The Barents Sea appears in both the Arctic and European lists, while the Arctic Council uses “Norwegian Sea” and “Faroe Islands” where EMODnet lists “Norwegian Shelf” and “Faroe Plateau”. A regional count is therefore not a slice of a global count unless both are tied to the same boundary version.
  • The Arctic Council map changed between 2006 and 2013, so “the Arctic LMEs” is not one fixed set of polygons.

Large marine ecosystems map and shapefile

PAME offers the Arctic LME map as a shapefile data package (a zip file) in its document library, and publishes a factsheet for each Arctic LME with species overviews for mammals, fish and birds. EMODnet’s European map uses data from the UN Atlas of the Oceans and is hosted in the European Atlas of the Seas, which offers a “My map notes” tool for annotating maps. NOAA’s InPort record describes the LME Program but does not itself state a file format, so cite the dataset you actually downloaded, not the programme page.

The 18 Arctic LME map numbers

The numbering on the Arctic Council map is: 1 Faroe Islands, 2 Iceland Shelf, 3 Greenland Sea – East Greenland, 4 Norwegian Sea, 5 Barents Sea, 6 Kara Sea, 7 Laptev Sea, 8 East Siberian Sea, 9 and 11 Bering Sea, 10 Aleutian Islands, 12 Northern Bering-Chukchi Sea, 13 Central Arctic Ocean, 14 Beaufort Sea, 15 Canadian High Arctic-North Greenland, 16 Baffin Bay, 17 Hudson Bay and 18 Labrador-Newfoundland. Factsheet numbers match these map numbers, so a citation to “Arctic LME 12” is only unambiguous if it also names the map version.

The 10 European LMEs

EMODnet lists the ten European LMEs as the Barents Sea, North Sea, Baltic Sea, Celtic-Biscay Shelf, Iberian Coastal, Black Sea, Mediterranean Sea, Canary Current, Norwegian Shelf and Faroe Plateau. It notes that they are generally 200,000 km² or larger and says that understanding them supports sustainable fisheries management, pollution control and biodiversity conservation.

How researchers use LME boundaries as analysis units

The practical value of an LME is that it gives a study area a defensible, published edge that is ecological rather than administrative. IW:LEARN describes LMEs as multi-country, ecosystem-based management units for tracking changes in ocean states and for taking remedial action to recover and sustain degraded goods and services. It attributes their transboundary character to interconnected currents, pollution and the movement and migration of marine living resources. Both points explain why LMEs are used where national waters would split one ecological system into several datasets.

PAME gives two concrete examples of use from the Arctic. The 2006 map was used descriptively in the AMAP Oil and Gas Assessment. The revised map serves as a framework for place-based assessments of changing LME conditions and as a basis for ecosystem-based management, including application of the ecosystem approach under the EU Marine Strategy Framework Directive and OSPAR. PAME also states that the LME concept rests on five modules: productivity, fish and fisheries, pollution and ecosystem health, socioeconomics, and governance. Those five modules give a ready structure for deciding which variables to aggregate per LME.

When fisheries are the subject, an LME is a natural unit for aggregating catch or stock indicators because IW:LEARN ties LMEs to roughly 80% of the world’s wild marine catch. For the harvest-theory background that such analyses lean on, see maximum sustainable yield. For nearshore habitat questions that fall inside an LME but at a finer scale, see coastal ecosystems. For biodiversity occurrence data that can be summarised per LME polygon, see the Ocean Biodiversity Information System.

Worked example: why the boundary version belongs in the methods

The Arctic record is the clearest sourced case of a boundary set changing. PAME developed a working map of 17 Arctic LMEs in 2006, which the Arctic Council later adopted. In 2012 the map was revised through a consultative process involving Arctic Council member-state agencies and other working groups, with the Ecosystem Approach Expert Group mapping the revised boundaries of 18 LMEs. The revised report was accepted and adopted by the Arctic Council at the ministerial meeting in Kiruna in 2013.

PAME gives the reason: some of the earlier boundaries cut through important ecological features and split them “somewhat arbitrarily”, for example the Bering Strait boundary between the Chukchi and Bering Seas and the boundaries at the New Siberian Islands and Wrangel Island. The consequence for a researcher is concrete. Two papers that both say “Bering Sea LME” may have summed data over different polygons if one used the 2006 map and the other the 2013 map. A time series stitched from both will contain a boundary artefact unless the polygons are harmonised. The cited LME count (17 versus 18) is the quickest signal of which version a source used.

Checklist for citing LME boundaries in a paper or dataset

The following checklist is editorial guidance derived from the version history above, not a rule published by NOAA, IW:LEARN, PAME or EMODnet:

  1. Name the boundary set and its owner (for example the Arctic Council PAME map or the UN Atlas of the Oceans layer used by EMODnet), not just “LMEs”.
  2. State the version or adoption year (2006 working map, 2013 adopted map) and the number of units, noting any unit that carries two map numbers.
  3. Cite the file you downloaded, with its access date, and archive a copy if your analysis cannot be rerun without it. A persistent identifier makes this easier; see DataCite DOI.
  4. Record which LME name variant you use when sources differ, such as “Norwegian Sea” versus “Norwegian Shelf”.
  5. If your data are clipped, merged or re-projected per LME, record that processing step in the project’s data management plan so the aggregation can be reproduced.

Common misunderstandings

  • “There are 18 Arctic LMEs, so there are 18 names.” The 18 are map numbers; the Bering Sea LME is numbered 9 and 11, giving 17 named units and 17 factsheets.
  • “The European LMEs are part of the Arctic LMEs, or the reverse.” The lists overlap in places (the Barents Sea is on both) but come from different owners with different names and boundary versions.
  • “An LME is a management zone with legal force.” The sources describe LMEs as ecological units and as a basis or framework for management. PAME presents its map as a descriptive reference and framework for assessment; the sources cited here do not describe LME boundaries as legal jurisdictions.
  • “The 66 figure and the US$ values are measurements.” The count is the published number of LMEs. The economic values are estimates quoted by IW:LEARN and should be attributed as such.
  • “The NOAA record is a data download.” The InPort entry is a project record owned by the NMFS Office of Science and Technology, last updated 9 August 2022 on the page, with Kenneth Sherman named as data steward. It describes the programme and is not itself a boundary file.

Where the LME framework matters in research practice

LMEs matter most in three kinds of work, each stated in the sources above. In fisheries assessment, because LMEs account for most of the wild marine catch. In pollution and ecosystem-health assessment, because currents carry contaminants across borders. In biodiversity conservation, where EMODnet says LMEs help policymakers adopt ecosystem-based approaches to marine protection. Across all three, the ecological definition is what lets countries sharing a system report on the same unit.

Frequently asked questions

What are the major marine ecosystems?

In the large-marine-ecosystem framework, the major units are the 66 LMEs that IW:LEARN counts around the world’s coastal oceans, each of about 200,000 km² or more. Regional lists name them: the Arctic Council map has 17 named LMEs and EMODnet lists 10 for Europe, including the Baltic Sea, North Sea, Black Sea and Mediterranean Sea.

What are the 7 different types of ecosystems?

The sources cited here do not define a set of seven ecosystem types, and the LME framework does not classify ecosystems by type. It divides coastal ocean space into named regional units using bathymetry, hydrography, productivity and trophically linked populations, so answers about “types” of ecosystem belong to a different classification scheme.

What are the top 5 ecosystems?

The LME sources do not rank ecosystems. They do say that LMEs as a group are the most highly productive areas of the oceans and yield about 80% of the annual marine wild-fisheries catch, which is a statement about the set, not a top-five list.

Which is the largest aquatic ecosystem?

The LME sources give a minimum size, about 200,000 km² or more, and not a ranking, so they do not name a single largest unit. The Arctic Council map does include a Central Arctic Ocean LME alongside shelf-sea units such as the Barents Sea and Hudson Bay LMEs.

Where can I find a large marine ecosystems map?

PAME provides the Arctic LME map as a downloadable shapefile data package and a factsheet for each Arctic LME. EMODnet hosts a European LME map in the European Atlas of the Seas, using data from the UN Atlas of the Oceans.

What is NOAA’s role in the LME concept?

NOAA’s LME Program, recorded by the NMFS Office of Science and Technology, develops ecosystem management tools, funds partner projects and provides training to support ecosystem-based management of marine resources. PAME dates the wider LME process to the early 1980s.

Sources

Data: Large marine ecosystem counts by boundary set, owner and year

Compares the number of large marine ecosystem (LME) units in the global count, the two Arctic Council map versions and the European list, with the owning body and adoption year, compiled from the programme and agency pages named in the sources. Arctic map numbers and distinct names are given separately because one LME carries two numbers.

Coverage: Global, Arctic and Europe.

Large marine ecosystem counts by boundary set, owner and year
Boundary setOwner or publisherMap numbers or unitsDistinct LME namesYear
Global LMEsIW:LEARN (GEF International Waters)6666not stated
Arctic LMEs, working mapArctic Council PAME17172006
Arctic LMEs, revised mapArctic Council PAME18172013 (revised 2012)
European LMEsEMODnet (EU), data from UN Atlas of the Oceans10102025 (article date)

Sources

Compiled by CASRAI from the sources above. Free to reuse under CC BY 4.0 with attribution.

Follow CASRAI

Research-administration guidance, standards updates and independent tool reviews.

Ask CASRAI · full access

Ask about Large Marine Ecosystems: 66 LME Boundaries and Research Use

Full access: large monthly usage, up to 10 source passages behind each answer, and MCP and API access for Claude Code, Codex and other CLIs. Cancel any time.

An AI assistant for research: funder rules, compliance, methods and publishing. It links the sources behind its answers and labels answers that come from a web search.

Answers draw on CASRAI's guides and dictionary plus the federal and funder documents we index: Federal Register, Grants.gov, Regulations.gov and UKRI.

Works on this site and inside Claude, Cursor and the AI tools you already use.

Everything CASRAI publishes — this page, the dictionary, the guides and the news — stays open to read, with no account and no card.

Referenced across the research world

University of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logoUniversity of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logo
  • University of Cambridge logo
  • Columbia University logo
  • Crossref logo
  • University of Edinburgh logo
  • Harvard University logo
  • University of Oxford logo
  • Princeton University logo
  • Stanford School of Medicine logo
  • University College London logo
  • ORCID logo

View CASRAI adoption →