Written and maintained by CASRAI Editorial Board
Published
On this page
Magnesium chloride (MgCl2) is, on most supplier safety data sheets, not classified as hazardous under GHS and carries no signal word. The aggregated notifications that suppliers have filed with ECHA tell a more mixed story: PubChem reports that 60.6% of 1,600 reports say the substance does not meet GHS hazard criteria, while the rest list skin, eye and respiratory irritation, serious eye damage, harmful if swallowed and corrosive to metals. For lab use, the practical rule is to follow the SDS for the exact grade and supplier on your shelf, and to treat dust, eye contact and moisture as the real handling issues.
Short answer: what the magnesium chloride SDS says
Three supplier SDSs for magnesium chloride hexahydrate (Alliance Chemical, Trace Sciences International and Lab Alley) each state that the product is not hazardous under GHS, with no signal word, no hazard pictogram and no established occupational exposure limit. PubChem’s GHS Classification page for magnesium chloride (CID 5360315), which aggregates notifications to the ECHA Classification and Labelling inventory, shows a minority of reports with the signal word Danger, pictograms GHS05 (corrosion) and GHS07 (exclamation mark), and hazard statements H290, H302, H315, H318, H319 and H335.
Both pictures are accurate descriptions of different records. The supplier sheets describe one product from one manufacturer. The aggregate describes what many notifiers submitted, with different purities, additives and test data. The data table below puts the four records side by side so the disagreement is visible in one place.
What a magnesium chloride SDS contains
OSHA’s Hazard Communication Standard requires a 16-section SDS in a fixed order. Section 1 identifies the product and supplier, Section 2 gives the hazard classification, signal word, hazard statements, pictograms and precautionary statements, and Section 3 lists ingredients including impurities and stabilizing additives. The remaining sections cover first aid, fire-fighting, accidental release, handling and storage, exposure controls and personal protection, physical and chemical properties, stability and reactivity, toxicology, ecological information, disposal, transport, regulatory information and other information. OSHA’s own briefing on the format notes that Sections 12 through 15 must be present for consistency with GHS, but OSHA does not enforce their content because other agencies handle those matters (OSHA brief on SDS requirements, read 2026-11-17).
That structure explains why a short search for a magnesium chloride SDS is rarely enough. The classification in Section 2 depends on the product the supplier actually sells, and Section 3 is where an additive or impurity that changes the classification would be declared. The sections you will use most at the bench are 2 (hazards), 7 (handling and storage), 8 (exposure controls and PPE), 10 (stability and reactivity) and 13 (disposal considerations).
Magnesium chloride hazards
GHS classification: what the records say
In the PubChem aggregate, no single hazard code appears in more than 37.6% of reports. The percentages for the codes that do appear are: H315 (causes skin irritation) 37.6%; H290 (may be corrosive to metals), H302 (harmful if swallowed) and H318 (causes serious eye damage) 27.6% each; H319 (causes serious eye irritation) 11.8%; and H335 (may cause respiratory irritation) 10.9%. Against that, 969 of 1,600 reports (60.6%) state that the substance does not meet GHS hazard criteria. PubChem also notes that the classification varies with impurities and additives (PubChem GHS Classification, magnesium chloride, read 2026-11-17).
A lab that sees both a Danger-labelled bottle and a not-classified SDS for the same compound name has not found an error. It has found two products with different composition or different supplier test data. The classification printed on your container label and in your own supplier’s SDS is the one that governs your hazard communication.
Health effects and toxicology
The Lab Alley SDS says that dust may cause mild mucous-membrane irritation and mechanical irritation of the eyes. The Trace Sciences SDS reports an oral LD50 in rats above 5,000 mg/kg (OECD 423, read-across) and a dermal LD50 above 2,000 mg/kg, and states that skin and eye irritation tests were negative. Trace Sciences also gives first aid for eye or skin contact as rinsing for at least 15 minutes. Where an aggregate record lists H318 or H319 for the same compound, the difference is the reason to keep eye protection on for any handling that can raise dust or splash solution.
Physical hazards
Magnesium chloride is not flammable. Trace Sciences lists hydrogen chloride gas and magnesium oxide as combustion products, and gives a melting point of 116.7 C and a water solubility of 468.7 g/l at 20 C for the hexahydrate. The physical hazard that matters in storage is moisture: Alliance Chemical describes the material as deliquescent and hygroscopic, and Trace Sciences lists moisture as a condition to avoid. A container left open cakes, and a solution is corrosive to metals, which is consistent with the H290 code in the PubChem aggregate.
PPE and exposure controls
The three supplier SDSs are consistent on protective equipment. Safety glasses are recommended (Trace Sciences specifies safety glasses with side shields to EN166), gloves are recommended for prolonged or repeated contact, and respiratory protection is not normally required. Trace Sciences adds that a full-face particle respirator (N100 or P3) is to be used only where a risk assessment shows a need, and that dust should be controlled with a fume hood or mechanical exhaust. Alliance Chemical states that general ventilation is adequate.
None of the three sheets gives an established occupational exposure limit; Alliance Chemical and Lab Alley state that none is established and Trace Sciences reports no data for workplace control parameters. The absence of a listed limit is not a statement that dust is harmless, so keep weighing of powder in a way that avoids visible dust. Glove selection for solutions is covered in the glove compatibility chart entry, and your institution’s chemical hygiene plan sets the local requirement for what PPE is mandatory regardless of what an individual SDS recommends.
Storage and incompatibilities
Both Alliance Chemical and Trace Sciences call for storage in a tightly closed container in a cool, dry, well-ventilated place. Because the salt takes up water from the air, closing the container promptly after each use is the main control. Trace Sciences lists strong oxidizing agents as a material to avoid.
Alliance Chemical names three specific incompatibles: strong oxidizing agents, silver nitrate, and 2-furan percarboxylic acid, which it describes as reacting explosively. The Lab Alley SDS makes the same warning in different words: adding magnesium chloride to furan-2-peroxycarboxylic acid at room temperature causes an explosion. Alliance Chemical also notes that solutions corrode metals, so metal secondary containers and shelving that will see spills are a poor match. If you maintain a chemical inventory by hazard class, this is a compound that sits comfortably with other inorganic salts but should be kept away from oxidizers.
Spills and disposal
For a dry spill, Lab Alley directs staff to sweep up or wet-sweep the material to avoid generating dust. Empty containers can retain residues, so the SDS treats them as still containing product. Both Alliance Chemical and Trace Sciences say not to let the material enter drains or waterways, and Alliance Chemical directs disposal in accordance with federal, state and local regulations. PubChem’s disposal note from the Hazardous Substances Data Bank adds that environmental regulatory agencies should be consulted before land disposal. In practice, the institution’s chemical waste procedure decides the route; an SDS statement that the substance is not hazardous under GHS does not by itself authorize sink disposal.
Why magnesium chloride SDSs disagree
The records here disagree on classification, but they agree on most of the handling advice. The differences come from four places that are visible in the sources themselves:
- Different notifiers, different data. PubChem’s aggregate pools 1,600 reports; a single supplier SDS reflects one company’s classification.
- Purity and additives. PubChem states that classifications vary with impurities and additives, and Section 3 of an SDS is where those are declared.
- Form of the salt. The three supplier sheets read for this page cover the hexahydrate. Check whether your container is anhydrous, hexahydrate or a solution before comparing, since the SDS is written for a specific product.
- Read-across and test data. Trace Sciences labels its LD50 as read-across, meaning it is derived from related data rather than tested on that exact product.
When two sources conflict, the working approach is to use the SDS for the exact catalog item in your lab, record its revision date, and apply the stricter control if your hazard assessment has reason to doubt it. For the same reason, an SDS for a different magnesium-containing or chloride-containing product is not a substitute. A related page, calcium chloride SDS, shows how a different salt classifies, and sodium acetate SDS and copper sulfate SDS follow the same format for comparison.
Common misunderstandings
- “Not classified” means no precautions. It means the product did not meet GHS classification criteria on that supplier’s data. Eye protection, dust control and moisture-tight storage are still recommended in the same SDSs.
- All magnesium chloride SDSs are interchangeable. The aggregate record and the supplier sheets differ, and a formulated product that merely contains magnesium chloride is a different SDS entirely.
- No exposure limit means no dust control. Three sheets report no established limit; that is a gap in limits, not a finding of safety.
- Safe for the drain. The supplier SDSs here say not to let the material enter drains or waterways.
- The MSDS is a different document. “MSDS” is the older name; the 16-section SDS format is the current OSHA hazard communication requirement.
Sources
- PubChem, GHS Classification for magnesium chloride (CID 5360315), ECHA CandL aggregate, read 2026-11-17
- Alliance Chemical, Magnesium Chloride Hexahydrate FCC/USP Grade SDS, read 2026-11-17
- Trace Sciences International, Magnesium chloride hexahydrate SDS, read 2026-11-17
- Lab Alley, Magnesium Chloride Hexahydrate SDS, read 2026-11-17
- OSHA, Brief: Safety Data Sheets (OSHA 3514), read 2026-11-17
Data: Magnesium chloride hazard records compared: PubChem ECHA aggregate and three supplier SDSs
Side-by-side comparison of one aggregated GHS database record and three supplier safety data sheets for magnesium chloride (hexahydrate sheets), compiled from the documents themselves: classification, signal word, PPE, storage, incompatibles, exposure limits and disposal.
| Record | GHS classification | Signal word | PPE | Storage | Incompatibles | Occupational exposure limits | Disposal |
|---|---|---|---|---|---|---|---|
| PubChem GHS Classification (ECHA C and L aggregate, CID 5360315) | 60.6% of 1,600 reports: does not meet GHS criteria; others report H290, H302, H315, H318, H319, H335 (GHS05, GHS07) | Danger (in the notifications that classify it) | Not stated in the record | Not stated in the record | Not stated in the record | Not stated in the record | HSDB note: consult environmental regulatory agencies before land disposal |
| Alliance Chemical SDS (hexahydrate, FCC/USP) | Not classified as hazardous under GHS | Not applicable | Safety glasses; gloves for prolonged or repeated contact; respiratory protection not normally required | Cool, dry, well-ventilated; hygroscopic and deliquescent, keep closed | Strong oxidizing agents, silver nitrate, 2-furan percarboxylic acid (explosive); solutions corrode metals | None established | Follow federal, state and local rules; not to drains or waterways |
| Trace Sciences International SDS (hexahydrate) | Not a hazardous substance or mixture | None | Gloves; safety glasses with side shields (EN166); N100/P3 respirator only where risk assessment shows need | Tightly closed, dry, well-ventilated; avoid moisture | Strong oxidizing agents | No data | Do not let enter drains |
| Lab Alley SDS (hexahydrate) | Not classified under GHS | None | Not stated | Not stated | Explosion on adding to furan-2-peroxycarboxylic acid at room temperature | None established | Sweep or wet-sweep spills to avoid dust; empty containers retain residue |
Sources
- PubChem GHS Classification, magnesium chloride CID 5360315 (accessed 2026-11-17)
- Alliance Chemical SDS, magnesium chloride hexahydrate FCC/USP (accessed 2026-11-17)
- Trace Sciences International SDS, magnesium chloride hexahydrate (accessed 2026-11-17)
- Lab Alley SDS, magnesium chloride hexahydrate (accessed 2026-11-17)
Compiled by CASRAI from the sources above. Free to reuse under CC BY 4.0 with attribution.







