Skip to main content
v2026.11,986 entries · CC-BY 4.0

Semiconductor Supply Chain: Architecture, Standards, and Risk Framework

A technical guide to the semiconductor supply chain, analyzing EDA design, foundry fabrication, OSAT packaging, SEMI standards, and C-SCRM resilience models.

Written and maintained by CASRAI Editorial Board

Published

On this page

The semiconductor supply chain is the globally distributed, highly interdependent value network that designs, fabricates, packages, and tests integrated circuits across specialized geographic tiers. Spanning electronic design automation (EDA) software, raw substrate materials, complex lithography equipment, frontend wafer foundries, and backend outsourced semiconductor assembly and test (OSAT) facilities, the supply chain requires multi-billion-dollar capital investments, strict defect-free manufacturing tolerances governed by SEMI standards, and multi-tier cybersecurity and resilience management under frameworks like NIST SP 800-161 Rev. 1.

Unlike conventional manufacturing networks, modern microelectronics production relies on extreme geographic specialization. A single advanced system-on-chip may cross international borders dozens of times during its production lifecycle, accumulating hundreds of thousands of transit miles from silicon crystal pulling to final device packaging. Understanding this value network requires analyzing how upstream software and tooling interface with physical fab cleanrooms, chemical purification facilities, and downstream packaging architectures. Organizations managing hardware programs must navigate systemic single points of failure, export control regulations, and technical qualification protocols to ensure continuity of critical compute infrastructure.

Ask CASRAI · free to tryQuestion about this guide? Ask CASRAI answers with linked sources. 2 free questions a day, no account.

Ask your first question freeSubscribe

What it is: Architecture and Lifecycle of the Semiconductor Supply Chain

The architecture of the semiconductor supply chain represents one of the most intricate industrial value networks in global production, operating across six distinct, sequential lifecycle phases. Each phase requires proprietary technical capabilities, capital equipment, and precision chemical processing:

  • Phase 1: Electronic Design Automation (EDA) and Core IP: The design phase transforms architectural system specifications into physical transistor layouts. Engineers utilize sophisticated EDA software suites to run logic synthesis, static timing analysis, placement and routing, and physical design rule checks. Design teams also license pre-verified semiconductor intellectual property blocks, such as microprocessor cores, memory controllers, and high-speed interfaces, which are integrated into complex system-on-chip architectures.
  • Phase 2: Raw Materials and Specialty Chemicals: Microelectronics fabrication demands hyper-pure chemical inputs that exceed standard industrial grades. The foundation is high-purity electronic-grade silicon (polysilicon purified to 99.9999999% or nine nines purity), which is pulled into monocrystalline ingots via the Czochralski process and sliced into polished wafers. Auxiliary materials include ultra-pure photochemicals (photoresists, anti-reflective coatings), specialty gases (silane, nitrogen trifluoride), and slurry abrasives for chemical-mechanical planarization.
  • Phase 3: Semiconductor Manufacturing Equipment: Equipment manufacturers design and build the complex machinery required inside cleanroom fabrication facilities. Key equipment categories include photolithography scanners, plasma etching systems, atomic layer deposition and chemical vapor deposition chambers, ion implanters, and automated metrology tools.
  • Phase 4: Frontend Wafer Fabrication: Performed inside ISO Class 1 to ISO Class 5 cleanrooms conforming to ISO 14644-2 continuous particle monitoring standards, frontend fabrication builds billions of interconnected transistors onto raw silicon wafers. Through an iterative cycle of photolithography, thin-film deposition, chemical etching, ion implantation, and polishing, microscopic circuitry is formed across hundreds of sequential process steps over 12 to 26 weeks.
  • Phase 5: Backend Outsourced Semiconductor Assembly and Test (OSAT): Completed wafers are shipped to backend facilities where individual silicon dies are evaluated via wafer probe testing, diced from the wafer substrate, mounted onto substrates, and encapsulated in protective packages. As conventional physical transistor scaling encounters thermal limits, backend processing has evolved into advanced packaging, including 2.5D interposers, 3D wafer stacking, and wafer-level packaging (WLP) that integrate heterogeneous chiplets into high-density multichip modules.
  • Phase 6: System Integration, Distribution, and Board Assembly: Packaged integrated circuits enter global distribution networks where they are inventoried by authorized franchised distributors and independent brokers before being mounted onto printed circuit boards by electronic manufacturing service providers and original equipment manufacturers.

In analyzing modern macro-industrial structures, researchers apply formal input-output decomposition methods derived from global value chains research to trace the accumulation of value-added content across international boundaries. In the semiconductor industry, this analysis illustrates why the historical integrated device manufacturer model, where a single entity managed everything from design to fabrication, has largely been superseded by the fabless-foundry specialization model. By disaggregating design expertise from the multi-billion-dollar capital expenditure of operating state-of-the-art fabs, the industry achieved rapid innovation cycles but created structural geographic dependencies.

Who runs it and what it covers: Ecosystem Scope, Geographic Concentration, and Choke Points

The global semiconductor supply chain is not evenly distributed across the world; rather, it is characterized by extreme geographic clustering and asymmetric regional competencies. Research conducted jointly by the Semiconductor Industry Association (SIA) and the Boston Consulting Group (BCG) provides empirical quantification of this specialization, mapping the distinct regional concentrations across each value tier.

SIA and BCG formally define a supply chain “choke point” as any manufacturing stage, specialized tool, or critical material where a single geographic region controls more than 65% of total global market share. Their foundational analyses revealed over 50 distinct choke points across the semiconductor value network. This hyper-concentration means that a localized shock—whether a seismic disruption, a major industrial fire, or a geopolitical trade embargo—can halt manufacturing lines globally within weeks.

The dominant geographic concentrations across the microelectronics ecosystem include:

  • Electronic Design Automation and Core IP (United States): The United States commands approximately 74% of the global EDA software and core semiconductor intellectual property market. Major American electronic design automation firms develop the complex algorithmic software engines without which leading-edge chips cannot be routed or validated. Furthermore, U.S. fabless design firms account for nearly 50% of global semiconductor design revenue.
  • Photolithography and Precision Optical Equipment (Netherlands and Japan): Advanced wafer fabrication relies on photolithography to pattern nanoscale circuit features. For leading-edge logic below the 7-nanometer threshold, Extreme Ultraviolet (EUV) photolithography is essential. A single European firm located in the Netherlands, ASML, maintains an effective 100% global market monopoly on EUV lithography systems. Each EUV machine contains hundreds of thousands of specialized components, requiring multi-year lead times and custom optical mirrors produced by specialized German optics manufacturers. Japan also maintains commanding positions in deep ultraviolet lithography and wafer track systems.
  • Wafer Substrates and Advanced Chemical Materials (Japan): Upstream semiconductor manufacturing is heavily reliant on Japanese chemical conglomerates. Japan accounts for more than 50% of the global supply of 300mm monocrystalline silicon wafers (produced to rigorous SEMI M1 dimensional specifications) and over 90% of advanced photoresists required for extreme ultraviolet and immersion lithography. Additional materials choke points exist in specialty gases and critical mineral refining.
  • Leading-Edge Frontend Fabrication (Taiwan and South Korea): East Asia accounts for approximately 75% of global wafer fabrication capacity. The concentration is most acute at the leading edge: Taiwan accounts for roughly 60% of total commercial foundry capacity and more than 90% of global manufacturing capacity for advanced logic chips below 10 nanometers, centered primarily within the high-density semiconductor fabrication hubs of TSMC. South Korea commands roughly 70% of the global memory market, including DRAM and 3D NAND flash memory, led by Samsung Electronics and SK Hynix.
  • Assembly, Testing, and Packaging (China, Taiwan, and Southeast Asia): Backend OSAT operations have historically been situated in regions with optimized assembly labor and packaging infrastructure. China and Taiwan collectively account for over 50% of commercial OSAT market share, with Southeast Asian nations such as Malaysia, Vietnam, and the Philippines hosting major test and packaging hubs for global chipmakers.

Recognizing the acute strategic risk of these geographic choke points, major industrialized economies have enacted sweeping legislative and industrial policy frameworks to build regional manufacturing buffers:

  • United States CHIPS and Science Act of 2022: Enacted under Public Law 117-167, the U.S. CHIPS Act appropriated $52.7 billion in federal funding overseen by the Department of Commerce and the National Institute of Standards and Technology (NIST). This includes $39 billion in direct manufacturing incentives administered by the CHIPS Program Office to subsidize domestic commercial fabrication and packaging facilities, alongside $11 billion dedicated to R&D initiatives, including the National Semiconductor Technology Center (NSTC), the National Advanced Packaging Manufacturing Program (NAPMP), and the CHIPS Metrology Program.
  • European Chips Act: Formally adopted as Regulation (EU) 2023/1781 in September 2023, the European framework mobilizes over €43 billion across three interconnected pillars: Pillar 1 (“Chips for Europe Initiative” supporting R&D, pilot lines, and design platforms via the Chips Joint Undertaking), Pillar 2 (incentivizing “First-of-a-Kind” Integrated Production Facilities and Open EU Foundries), and Pillar 3 (a crisis response and supply chain monitoring mechanism governed by the European Semiconductor Board) with the stated mandate of doubling Europe’s global semiconductor production share to 20% by 2030.

How to search or use it: Supply Chain Mapping, Traceability, and Procurement Frameworks

For research organizations, defense contractors, and enterprise hardware development teams, managing semiconductor supply chain exposure requires moving beyond reactive purchasing to rigorous multi-tier mapping, standards verification, and quality assurance. Teams evaluating hardware suppliers and electronic component provenance should execute a structured six-step qualification and risk management workflow:

  1. Decompose the Bill of Materials (BOM) and Execute Multi-Tier Supply Chain Illumination: Hardware engineers must catalog every integrated circuit, passive component, and substrate within the system BOM. Procurement specialists must trace component supply chains beyond Tier-1 authorized distributors back to the original component manufacturer (OCM), the frontend wafer fabrication foundry, and the backend assembly house. Organizations must construct a Hardware Bill of Materials (HBOM) that documents part numbers, silicon revisions, packaging sites, and country of origin for all active silicon.
  2. Verify Conformance to SEMI Microelectronics Manufacturing Standards: When procuring bare dies, custom application-specific integrated circuits, or specialized substrates, quality engineers must verify that manufacturing partners adhere to Semiconductor Equipment and Materials International (SEMI) standards. Key standards include:
    • SEMI M1: Establishes strict dimensional, physical, and surface quality requirements for polished monocrystalline silicon wafers (including thickness, edge profile, warp, and surface roughness).
    • SEMI E10: Governs the definition and measurement of equipment reliability, availability, and maintainability (RAM) metrics, ensuring fab tools maintain documented productive uptime.
    • SEMI S2: Enforces environmental, health, and safety guidelines for all fabrication machinery, covering electrical interlocks, toxic gas containment, and emergency power-off systems.
  3. Integrate Process Reference Architectures and Standard Logistics Metrics: Modern hardware supply chains depend on disciplined process alignment across plan, source, make, deliver, and return workflows. Procurement teams should align their vendor evaluation metrics with the SCOR model to track supplier delivery reliability, order fulfillment cycle times, and inventory days of supply. Furthermore, logistics operations should implement formal benchmarks codified in CSCMP standards to establish total cost of ownership models that account for lead times, buffer inventories, and geopolitical tariff exposures.
  4. Implement Multi-Tier Cybersecurity Supply Chain Risk Management (C-SCRM): Technical supply chain risks encompass not only physical shortages but also counterfeit components, hardware trojans, and malicious firmware tampering. Program offices must implement the three-tiered C-SCRM governance framework established in NIST Special Publication 800-161 Revision 1 (Cybersecurity Supply Chain Risk Management Practices for Systems and Organizations):
    • Tier 1 (Organization Level): Establish formal C-SCRM policies, organizational risk tolerance, executive oversight boards, and strategic supplier governance criteria.
    • Tier 2 (Mission and Business Process Level): Assess supply chain risks within specific programs, categorizing critical system functions and evaluating supplier security practices and geographic vulnerabilities.
    • Tier 3 (Information System Level): Conduct technical evaluation of components, enforcing requirements for cryptographically signed firmware, secure boot hardware roots of trust, and automated vulnerability scanning of integrated electronic sub-assemblies.
  5. Enforce Counterfeit Avoidance Policies via SAE AS5553 Protocols: To protect high-reliability systems from counterfeit, cloned, or remarked semiconductor devices, organizations must implement formal counterfeit control plans satisfying SAE AS5553 (Counterfeit Electrical, Electronic, and Electromechanical Parts; Avoidance, Detection, Mitigation, and Disposition). AS5553 mandates purchasing exclusively from OCMs or authorized franchised distributors. When obsolete or long-lead components must be sourced from independent distributors or the open broker market, AS5553 requires formal risk assessment, traceable chain-of-custody documentation, and mandatory quarantine protocols for suspect lots.
  6. Execute Independent Laboratory Testing and Defect Screening via SAE AS6171: When electronic parts are sourced from open-market channels, procurement mandates must require lot screening at ISO/IEC 17025 accredited testing laboratories compliant with SAE AS6171 (Test Methods Standard; General Requirements, Suspect/Counterfeit, Electrical, Electronic, and Electromechanical Parts). Test engineers apply specialized slash-sheet test protocols, including:
    • AS6171/2: External visual inspection, remarking detection, and surface texture microscopy.
    • AS6171/3: X-ray fluorescence spectroscopy to analyze lead-finish elemental composition and confirm RoHS compliance.
    • AS6171/4: Chemical or mechanical delidding and decapsulation physical analysis to inspect internal silicon die markings, wire bond metallurgy, and manufacturer copyright logos.
    • AS6171/5 and AS6171/6: Radiological X-ray inspection to detect missing internal dies, wire bond breaks, and construction anomalies without damaging the package.

Strengths and limits: High Capital Efficiency versus Systemic Fragility

The contemporary semiconductor supply chain represents an extraordinary triumph of global industrial optimization, yet its very architecture creates severe structural vulnerabilities that organizations must weigh during strategic planning.

Core Strengths of the Specialized Ecosystem:

  • Technological Acceleration and Scaling Velocity: By allowing fabless design companies to focus exclusively on computational architectures and foundries to concentrate on materials science and photolithography physics, the ecosystem sustained Moore’s law scaling for decades. This division enabled the commercialization of FinFET, Gate-All-Around nanosheet architectures, and sub-3nm nodes that require multi-billion-dollar R&D investments that no single enterprise could shoulder alone.
  • Capital Efficiency and Asset Optimization: Operating a leading-edge fabrication facility requires massive scale. A single state-of-the-art 300mm wafer gigafab costs between $15 billion and $20 billion to construct and equip, with lithography tools alone costing up to $350 million per EUV system. The pure-play foundry model pools global production volume from hundreds of fabless companies, allowing foundries to run cleanrooms at 90% or higher capacity utilization, driving down the unit cost of advanced silicon.
  • Access to Global Talent Clusters: Geographic specialization allows the industry to draw upon specialized regional ecosystems, including software and algorithm design talent in North America, precision optics and mechanical engineering in Central Europe, chemical formulation in Japan, and high-density semiconductor manufacturing operations in Taiwan and South Korea.

Structural Limits and Systemic Fragilities:

  • Inelastic Production Cycles and Extreme Lead Times: Frontend wafer fabrication is an inherently slow, highly linear physical process. Processing a leading-edge logic wafer through 1,000+ chemical, lithographic, and etching steps requires 12 to 26 weeks. Adding new cleanroom capacity takes 3 to 5 years from groundbreaking to commercial qualification. As a consequence, semiconductor supply is virtually inelastic in the short term. When rapid demand spikes occur, lead times can stretch from 12 weeks to over 52 weeks, creating severe downstream shortages.
  • Acute Single Points of Failure and Geopolitical Vulnerability: The concentration of over 90% of sub-10nm logic manufacturing in Taiwan places the entire global digital economy at the mercy of localized seismic hazards and geopolitical tensions across the Taiwan Strait. Furthermore, reliance on ASML for EUV lithography and Japanese suppliers for photoresists creates single-source chokepoints where an isolated disaster could paralyze global chip production.
  • Vulnerability to Bullwhip Demand Distortions: The long delay between upstream wafer starts and downstream consumer or automotive device sales makes the semiconductor value network notoriously vulnerable to the bullwhip effect. Small shifts in final demand produce massive, destabilizing swings in foundry wafer orders, leading to severe boom-and-bust cycles in fab capacity utilization and capital expenditure.
  • Regulatory and Export Control Fragmentation: Increasing national security scrutiny has introduced regulatory friction into the global supply chain. Export Administration Regulations maintained by the U.S. Bureau of Industry and Security enforce strict export licensing controls on advanced computing chips, EDA software, and semiconductor manufacturing equipment exceeding specific physical thresholds (such as 16/14nm logic nodes, 18nm half-pitch DRAM, and 128-layer NAND). These restrictions force global firms to re-architect supply chains and duplicate operational facilities across geopolitical blocs.

Alternatives: Sourcing Strategies, Foundry Partnerships, and Regional Ecosystems

Organizations developing microelectronics hardware or procuring mission-critical computing infrastructure must choose among distinct supply chain and sourcing strategies. Each operational model offers distinct trade-offs across capital intensity, intellectual property protection, supply resilience, and cost efficiency. The comparative table below outlines the core sourcing architectures available to engineering and procurement leaders:

Operational Sourcing Model Primary Industry Examples Capital Intensity and Fixed Costs Intellectual Property Protection Supply Chain Redundancy Typical Wafer Lead Time Optimal Use Case and Target Application
Integrated Device Manufacturer (IDM) Intel, Samsung Electronics, Texas Instruments, STMicroelectronics Very High ($15B–$20B+ per leading-edge fab complex) Maximum: Design, process recipes, and packaging remain in-house Internal: Limited to manufacturer’s own internal fab footprint 12–20 weeks (internal scheduling control) High-volume standard components, proprietary processors, memory, and automotive power electronics where process-design co-optimization provides competitive advantage.
Fabless Design + Pure-Play Foundry NVIDIA, AMD, Qualcomm, Apple partnering with TSMC, GlobalFoundries, UMC Low to Moderate (R&D, tape-out, and mask set costs only) Moderate: Requires sharing design files and IP blocks with external foundry Low: High dependence on single foundry partner’s cleanroom capacity 14–26 weeks (subject to foundry allocation and slot booking) Leading-edge computing, AI accelerators, mobile application processors, and graphics chips requiring the most advanced lithographic nodes.
Multi-Source Foundry Strategy Hardware programs qualifying both TSMC and Samsung Foundry or Intel Foundry High: Requires dual mask sets, distinct physical design libraries, and dual PDK qualification Moderate: Shared with multiple external commercial foundries High: Ability to shift wafer production allocations across distinct geographic cleanrooms 14–24 weeks (with operational flexibility during regional disruptions) Mission-critical enterprise infrastructure, automotive microcontrollers, and defense systems where single-foundry disruption poses unacceptable operational risk.
Regionalized Subsidized Onshoring Facilities funded under the US CHIPS Act or European Chips Act (e.g., TSMC Arizona, Intel Ohio, ESMC Dresden) Subsidized High: Massive capital outlays offset by government grants and tax credits High: Fabricated under domestic jurisdiction with local regulatory oversight Maximum: Establishes complete geographic manufacturing and packaging redundancy outside East Asia 12–20 weeks (post-qualification and operational ramp) Sovereign defense microelectronics, critical national infrastructure, aerospace, and high-reliability industrial automation requiring secure geographic chain of custody.

While the pure-play foundry model offers the lowest capital barrier to entry for cutting-edge computing architectures, aerospace, defense, and high-reliability industrial organizations increasingly mandate multi-foundry sourcing or regionalized fab qualification. Although porting an integrated circuit layout between different process design kits incurs substantial non-recurring engineering expenses and requires separate lithography mask tooling, it provides indispensable insurance against regional supply chain paralysis.

Frequently asked questions

What is the semiconductor supply chain?

The semiconductor supply chain is the global value network responsible for designing, manufacturing, assembling, and testing integrated circuits. It encompasses upstream Electronic Design Automation (EDA) software, raw electronic-grade silicon wafers, complex cleanroom equipment such as photolithography scanners, frontend wafer fabrication foundries, and backend outsourced semiconductor assembly and test (OSAT) facilities.

Why is the semiconductor supply chain vulnerable to single points of failure?

The supply chain is vulnerable because of extreme geographic clustering and technical specialization. According to reports from the Semiconductor Industry Association and Boston Consulting Group, there are over 50 “choke points” across the value chain where a single region holds over 65% market share. For example, over 90% of advanced logic chips below 10nm are fabricated in Taiwan, and 100% of Extreme Ultraviolet (EUV) photolithography tools are manufactured by ASML in the Netherlands, meaning localized disruptions can halt production worldwide.

What is the difference between an IDM and a pure-play foundry model?

An Integrated Device Manufacturer (IDM) manages both the design and physical fabrication of integrated circuits within its own proprietary facilities (such as Intel or Texas Instruments). In contrast, a pure-play foundry (such as TSMC) focuses exclusively on fabricating silicon wafers designed by external, fabless semiconductor companies (such as NVIDIA, AMD, or Qualcomm), allowing designers to avoid multi-billion-dollar cleanroom capital costs.

What role do SEMI standards play in semiconductor manufacturing?

Semiconductor Equipment and Materials International (SEMI) standards establish universal technical baselines that ensure compatibility and safety across global suppliers. Key standards include SEMI M1, which standardizes monocrystalline silicon wafer dimensions and tolerances; SEMI E10, which defines equipment reliability, availability, and maintainability (RAM) metrics; and SEMI S2, which defines environmental, health, and safety baselines for fab manufacturing equipment.

How does NIST SP 800-161 Rev. 1 mitigate hardware supply chain risks?

NIST SP 800-161 Rev. 1 establishes a comprehensive Cybersecurity Supply Chain Risk Management (C-SCRM) framework across three tiers: Organization (Tier 1 governance and risk tolerance), Mission and Business Process (Tier 2 supplier vetting and criticality assessment), and Information System (Tier 3 technical verification). It guides organizations in identifying counterfeit electronic components, mitigating hardware trojans, requiring Hardware Bills of Materials (HBOMs), and ensuring verified chain of custody.

What are the primary government initiatives addressing semiconductor resilience?

The primary legislative initiatives are the U.S. CHIPS and Science Act of 2022 and the European Chips Act of 2023. The U.S. CHIPS Act provides $52.7 billion in funding, including $39 billion in commercial manufacturing incentives and $11 billion in R&D initiatives like the National Semiconductor Technology Center (NSTC). The European Chips Act (Regulation (EU) 2023/1781) mobilizes over €43 billion to support research, “First-of-a-Kind” European foundries, and supply chain crisis monitoring, aiming to achieve a 20% global market share by 2030.

Sources

Data: Global Semiconductor Supply Chain Tier Profiles, Market Concentration, and Standards Matrix

Comparative analysis of key semiconductor supply chain tiers, mapping primary geographic market share concentrations, representative industry entities, critical governing standards, and resilience risk levels compiled from Semiconductor Industry Association (SIA/BCG), SEMI, NIST, and European Commission publications.

Period covered: 2021/2026. Coverage: Global.

Global Semiconductor Supply Chain Tier Profiles, Market Concentration, and Standards Matrix
Supply Chain TierLead Regional Share (%)Dominant Geographic RegionGoverning Standard or Regulatory FrameworkKey Choke-Point Vulnerability
Electronic Design Automation (EDA) & Core IP74United StatesIEEE / Accellera StandardsProprietary software monopoly; vulnerability to export licensing restrictions
Extreme Ultraviolet (EUV) Photolithography100NetherlandsSEMI S2 / SEMI E10Single-supplier equipment monopoly (ASML); multi-year delivery lead times
Silicon Wafers (Monocrystalline Substrates)56JapanSEMI M1Substrate crystal pulling concentration; reliance on high-purity chemical inputs
Leading-Edge Logic Fabrication (90TaiwanSEMI Standards / ISO 9001Severe geographic and seismic concentration in Taiwan fabs (TSMC)
Memory Fabrication (DRAM & 3D NAND)70South KoreaJEDEC Solid State StandardsGeographic clustering in South Korea; high capital expenditure cycle volatility
Assembly, Packaging, and Test (OSAT)60Taiwan and ChinaSEMI Standards / JEDECBackend labor and chemical concentration; capacity bottleneck in advanced packaging (CoWoS)
Hardware Supply Chain Risk Management100United States and GlobalNIST SP 800-161 Rev. 1 / SAE AS5553Counterfeit component infiltration, hardware trojans, and non-traceable broker lots

Sources

Compiled by CASRAI from the sources above. Free to reuse under CC BY 4.0 with attribution.

Follow CASRAI

Research-administration guidance, standards updates and independent tool reviews.

Ask CASRAI · free to try

Ask about Semiconductor Supply Chain: Architecture, Standards, and Risk Framework

2 free questions a day, no account.

An AI assistant for research: funder rules, compliance, methods and publishing. It links the sources behind its answers and labels answers that come from a web search.

Answers draw on CASRAI's guides and dictionary plus the federal and funder documents we index: Federal Register, Grants.gov, Regulations.gov and UKRI.

Works on this site and inside Claude, Cursor and the AI tools you already use.

Everything CASRAI publishes — this page, the dictionary, the guides and the news — stays open to read, with no account and no card.

Referenced across the research world

University of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logoUniversity of Cambridge logoColumbia University logoCrossref logoUniversity of Edinburgh logoHarvard University logoUniversity of Oxford logoPrinceton University logoStanford School of Medicine logoUniversity College London logoORCID logo
  • University of Cambridge logo
  • Columbia University logo
  • Crossref logo
  • University of Edinburgh logo
  • Harvard University logo
  • University of Oxford logo
  • Princeton University logo
  • Stanford School of Medicine logo
  • University College London logo
  • ORCID logo

View CASRAI adoption →